021 Sash fillister plane - building process. Woodworking
Вставка
- Опубліковано 7 вер 2024
- Sash fillister plane - i had planned to build that plane for a long time. Today it is not a plan, it's a plane.
Despite some mistakes or shortcomings i'm proud how it came out. I know that video is very long, but as always i couldn't show you less.
At the end of the video i choose the winner of my last giveaway.
Marking gauge from spalted wood have new owner :)
Congrats!
• 019 Woodturning - mark...
If you have any questions or sugestions just write a comment.
Enjoy!
.........................................................................
For more check my instagram profile:
/ stavros_gakos
Remember to subscribe my buddy, Łukasz Giergasz.
Today he upload new awesome video, go here and enjoy:
• Old German Axe Restora...
.........................................................................
Sash fillister plane - i had planned to build that plane for a long time. Today it is not a plan, it's a plane.
Despite some mistakes or shortcomings i'm proud how it came out. I know that video is very long, but as always i couldn't show you less.
At the end of the video i choose the winner of my last giveaway.
Marking gauge from spalted wood have new owner :)
Congrats!
If you have any questions or sugestions just write a comment.
Enjoy!
And you have what to be proud of, that's a very good lucking plane. Kudos!
What mistakes or short comings. The plane came out beautiful and awesome looking as well as working great from what I saw. I would love it or any of your planes. Your are a hell of a craftsman.
ваще улёт
How many planes have you made?
@@djsnowman06 i don't count them :)
You are nothing short of a genius my friend. Not ONE of your videos is too long. This is a lesson in Craft, and Beauty. You have given the wooden plane a new definition. God bless.
Thanks a lot:)
Godammit that is one serious looking plane.
That has to be the best YT video I’ve ever seen.
Complicated, accurate, beautiful, even the wedge is a work of art.
Love the sounds of you working, doesn’t need music and writing on the wood
Master piece
Yeah you could fall asleep or better still, meditate to the sounds of the master at work. Try that with power tools! His wood notepad/chalk boards show how in the end written words are but floating wisps enroute to the floor. And James Bond may have sexy horns and bad ass guitar licks, but Stavros's finger snap kills!
David Bentz I love his finger snap, sometimes I try to guess when he’ll do it.
No need to show every stage, just snap your fingers.
Brilliant.
Thanks guys!
Your craftsmanship are on an entire different level compared to most of the others on UA-cam i know about.
Thanks a lot!
There's still a lot that I don't understand about making the plane, but I do know that I love the sound it makes and the gleaming smooth surface after it's been planed. I'm in awe of your talent and craftsmanship and I look forward to every new video
Thanks a lot!
This is my kind of instructional video. No chunter, no irritating rock music, just pure technique, loved it, I was wondering how you were going to make the depth control and there it was. Very neat. Great piece of equipment from a first rate craftsman!!!
Thank you!
I moved to Japan and don't have any of my electric tools. There isn't any space for them and the noise in the house would be too great, so I decided to work without any electric tools, or at least with minimal electric tools; this lead me to hand planes, both European and Asian- and to your site. I have discovered a whole new world that existed for centuries! I am anxious to go deeper into the hand plane and chisel wood working realm.
Thank you, for your fantastic videos, and I'll check out Lukasz's videos too.
That's nice! Thanks Douglas:)
The most complicated plane I have watched you build. Beautiful as always
Thanks a lot :)
There you go, showing off those shavings again......
Outstanding!!!!
I've never seen someone so involved in planes and planing without a flying license :)
😁
While i'm familiar with router planes and shoulder planes, that plane you're using to create the grooves is new to me. Very interesting. I'm mostly a power tool woodworker, so i always find your videos completely fascinating.
Thank you. Power tools are helpful, but hand tools are first for my heart :) Regards!
I admire your handworking. Craftsman skills are excellent.
Bravissimo ottimo lavoro complimenti sei un grande artista 👏👏👏👍👍👍
Witam i pozdrawiam!!Swietnie wykonany strug z udoskonaleniem,duza wiedza z obrobki drewna,dokladnosci przynosi dobre efekty,przydatne narzedzie w warsztacie solarskim.Tak trzymac!!
Dziękuję i również pozdrawiam!
Tego się już nie da odzobaczyć!!! Jesteś wielki. Każdy projekt i realizacja jest coraz lepsza więc strach myśleć co będzie później. Detalami zabijasz!! Głupie śruby I nakrętki to jak najdroższe diamenty na szyjach modelek z domu Channel!! Rozwijaj się dalej bo tworzysz coś o czym obecnie się już tak bardzo nie pamięta a ty jesteś takim swoistym wehikulem czasu przypominającym nam o tym że dawniej wszystkie potęgi były budowane pracą rąk ludzkich i takimi właśnie narzędziami,!!! MISTRZ
Wojtas po Twoim komentarzu czuję się mega doceniony ;) Dziękuję!
That is a masterpiece and you manage to make it look 100 years old.
Thanks a lot Keith!
Honestly, it was too sped up for me. Would love to see whole version in full length. It is pleasure to watch someone so talented as you.
The pear must have been joy to work with!
Thanks Lubos, i have to make compromises. The pear is more better to work than beech. Regards!
Spadłem z krzesła ... za parę lat jeszcze za życia zostaniesz legendą wytwórców ręcznych narzędzi jeśli już nią nie jesteś ;)
Dzięki Darek! Trzymam Cię za słowo :)
you,ve got the job Stavros when can you start , great craftsman
What a beauty !
You're a plane-making genius and should be Professor of Planeology.
Haha thank you :)
What a great talent you are.
I’ve watched this video in particular a few times actually. I think this is the third.
Anyway, so grateful that there is a dude like you sharing this on UA-cam.
Thanks for doing what you do and sharing it with us!
It really is of great value!
Really!
Thanks Ryan :)
Красивый получился инструмент. Каждый раз смотрю на Вашу работу с огромным удовольствием.
Олег, спасибо, ты выиграл в конкурсе этот тег. посмотрите последнюю минуту фильма и напишите мне :)
Написал Вам на электронную почту
Niesamowita robota, niesamowity talent. Podziwiam każdą Twoją pracę i z niecierpliwością czekam na kolejne projekty. 👍👍👍
Dziękuję bardzo :)
أفضل عملية نجارة شفتها في حياتي أفضل نجار محترف ودقيق وعبقرية ونظيف جدأ ؟؟
Strug mistrzostwo świata. Trudność wykonania jak dla mnie niemożliwe. Z chęcią kupił bym od Ciebie jakikolwiek strug 😁 Oczywiście 👍
Dziękuję :) w najbliższym czasie nie planuję nic sprzedawać, ale obserwuj mój instagram - tam w pierwszej kolejności pojawią się moje oferty. Pozdrowienia
@@StavrosGakos dzięki, będę obserwował 😁
My 3 year old was watching the video with me and all on his own he said, "It works! It looks perfect!"
Haha thank you :)
New video! Stopped what I was doing with the widest smile on my face :)
Glad to read that ;) thanks!
Simply the best. Practical, innovative, creative, focusing on important knowhow. Thank you!
Thank you !
What a wonderful tool I keep nearly getting one and now wish I had. But to make your own well that’s taking things to another level. Bravo.
Thanks a lot Steve :)
Mr. Gakos, I have watched your videos, l am 73 years old, started wood work as hobby when quiet young my question...is plane making your hobby what is your exact profession, hope you don't mind, l was just wondering while watching your excellent skill with hand tools. God bless you with good health and a happy peaceful life full of beautiful hand planes of all types that one can think off. We keep on copying them....ha ha...
Thanks a lot! Yes it is my hobby yet, i'm office worker. Cheers!
thanks I now finally understand what the sash fillister does, it now makes sense, I always wondered why you can't just use a standard rebate plane! now I know why, also really beautiful build, I look forward to more videos and am glad I subscribed.
Thank you :)
Honestly, the craftmanship quality is way more than uncanny, a some kind of magic 🖖🇮🇹
Thanks a lot!
What a beautiful job you made of this. I thoroughly enjoyed the video.
I did wonder why you used a router jig to square the ends of the timber when a shooting board and plane would have been faster and cleaner?
It probably made perfect sense in your case to cut a plane iron to make this but for those who also wish to do so it is possible to buy off the peg, plane iron blanks for moulding planes that one can grind or sharpen to one's own specification or design.
Thanks Jack! Shooting 40mm of pear end grain would be a nightmare :) Regards!
hi, i have the same plane as that but its full woodwurm ,i must somehow rebuild it but dont have your skill man ,good job on all the planes you build.
THAT is one beautiful build . BRAVO Stavros. BRAVO.
Thank you!
Beautiful works...
Very, very nice! I learned a lot. I bought one like that from ebay. An old one. I could not figure out how to use it properly. Thanks to You Sir, now I know 😊.
You're welcome :) Regards!
This ia n ambitious project! Great job.
Thanks!
I wish i had 10% of your skill with wood working.
Your amount of patience is unbelievable🖒
If I could like 1000 times I would. Supreme video and explanation. Great video.
Thanks a lot :)
Esa no es una herramienta para trabajar la madera,esa es una auténtica obra de arte,que sirve para ese propósito ,maravilloso trabajo,casi hipnótico,la madera es muy agradecida,si la tratas con un poco de cariño,y en las manos del artesano apropiado,el resultado no podría ser otro,una pieza divina de la muerte,un saludo y un like desde Naron(Galicia)
Dziękuję i również pozdrawiam!
Thank you Gakos for another great video. I’m new to your channel, joined about four or five days ago. I’ve watched every video you have put on your video list. I really enjoy them all. You asked in one video if you should do subtitles, I don’t think it’s needed. When you write on the wood is perfect for me. And from the comments most all feel the same way.
The box wood you use in most of your videos sparked my interest, so I researched about it. To my amassment it’s the same one we have here in Texas. I’ll have to try working some one day. Just gotta find the time when my neighbor is gone to harvest some.
And by the way happy belated birthday.
Thanks a lot Nick! I love boxwood :)
Just Beautiful!
I like the vice router jig you made, I was playing with design idea like that, for making whetstones, just with an angle grinder instead of a router.
you put some real nice workmanship into this plane and it looks like it works, exactly like it should!
I love the sound it made when planing wood. clean and sharp!
Thank you :)
Really perfect plane
I use it before long
Time ago but I
Don't have
It now.
I would love to see a video showing everything that you have made - finished. 🤩
🇧🇷 Congratulations.... A big class of woodworking.... Thank you very much. A big hug from Brasil Said Choucair
Thank you Said!
Holy shit. You’re the best yt woodworker. Solidly destroying every other maker. 21/21.
Thanks a lot :)
That's a beautiful plane you made. It's certainly something of which to be proud.
Thank you Joshua!
i don't know the words to describe the mastery.
What beautiful craftsmanship and wonderful work ethic you have!
I would love to hear you talking and narrating your videos. I’m sure we would all love to hear your thoughts and anything you might have to say about the build process. Iv made a few dozen planes and from my experience… It is difficult and requires an odd set of skills. So I very much admire your work it is beautiful!
Thank you:) I'm from Poland and my english is not so good to talk easly during videos. That's why i write short infos on the wood surfaces. Maybe one day i'll try. Regards!
That’s an an absolutely beautiful plane !
Very nice work
OK sehr Gut gemacht.
Dziękuję :)
beautiful lesson
Thank you!
Nossa...muito bonito e eficiente, apaixonei por suas ferramentas, parecem obras de arte. Parabéns.
Thanks a lot :)
That is one hellacious piece of equipment, Stavros. You never cease to amaze. Bravo Sir, Bravo!
Thanks a lot Sir :)
Brilliant work, and really enjoyed seeing how it came out and you using it at the end.
Thank you Nick!
ΜΠΡΑΒΟ ΠΟΛΥ ΚΑΛΟ ΚΟΜΜΑΤΙ ΚΑΙ ΠΟΛΥ ΚΑΛΗ ΔΟΥΛΕΙΑ !!!ΠΑΝΤΑ ΑΞΙΟΣ ΦΙΛΕ !!!
Thank you very much!
Fantastic and beautiful work 😊 ॐ
Thank you :)
Jestem mega pełen podziwu, za kreatywność, dokładność CNC w rękach, pozdrawia i czekam na inne materiały z twojej serii
Dzięki Łukasz!
Thats a lovely plane Stavros, thanks for sharing with us.
Thank you!
A new video! I will stop everything that I'm doing and watch it from beginning to end.
Amazing. Your skills and the finished product. Thanks for posting this.
Thanks again :)
Another great demonstration of top notch Craftsmanship ! Bravo my freind
Stavros- Pokłony!!! Chciałbym spojrzeć w oczy tym 24 ciulom, co pokazali kciuk w dół
Dzięki!
Quel plaisir de voir apparaître ces beaux objets
Thank you Dominique!
Well done💕💕💕💕💕💕💕💕💕💕💕💕💕💕
Inspired to restore my moving fillister plane. Nice buils
I'm glad to read that :)
Piękny strug, może konkurować z angielskimi zabytkowymi strugami. Osiągnąłeś mistrzostwo.
Do mistrzostwa jeszcze trochę ;) dzięki!
Wreszcie fajny strug😉 Disstona wcześniej nie zauważyłem, nowy nabytek? Robota mistrzostwo i chyba na cotaz wyższym poziomie. Pięknie (kolejny raz tak piszę)😉
Hehe dzięki ;) tak, nowy nabytek prosto z Uk. Pozdrowienia!
Beautifully made and functional
Thank you!
That is one beautiful Ly engineered and . Bravo 👏👏👏
Thanks!
Que obra de arte está ferramenta.
Parabéns.
Saudações daqui do Brasil.
Thank you! Regards!
Nie mogę się doczekać spustnika i kolekcji strugów...
A beautiful yet functional stuff. Love the way it turned out.
Thanks!
Yes!!!! A new video. A home run.
Haha thanks a lot :)
This plane turned out amazing Stavros 😁 I always get worried when you stamp your mark AFTER doing so much work...... I would be afraid of splitting the body during stamping 😳
Master plane maker 🤙
Thanks a lot!
@@StavrosGakos what are the thread pitch and tool width
I like you style! Hopefully others will follow. RWB ❤🎉
Nice bench!
@@richardbutterfoss2353 thank you !
Real craftmanship, you created a beauty👍👍👍
Thank you :)
Beautiful craftsmanship, a real pleasure to watch!!
Thank you David :)
Damn wish I had won the marking gauge. A big congrats to the winner you won an awesome piece of craftsmanship.
Another beautiful and unique tool.
Thanks Jim!
P.S. for anyone intending to make one of these he nicker needs to be made from gauge plate. Standard mild steel will not adequately harden from heat treatment. Gauge plate is readily available from metal stockists in the U.K.
VERY nice!
Thank you!
Amazing work! This is another level! I will be studying your videos when I attempt making some side escapement planes
Thank you :)
veddy nice!!! learned a lot from watching this. thanks
I love your videos long or short. This plane is beautiful.well built by a fine craftsman. Thanks and looking forward to the next video
Thanks a lot!
Very good job and nice design . I would only suggest the locking nut (minute 21) to be made from three layers , instead of two. Layers should always be odd number (symmetrical) , otherwise you get distortion in a "potato chip" shape.
Thank you! I will check it, thanks for the tip :)
You should be very proud - great job!!!
Yup :) Thanks a lot!
really excellent and accurate work.
Thanks a lot!
ola sr Stavros...ganhou um amigo Brasilian....parabens pelo seu trabalho maravilhoso.....um abraço!!!!
Thanks a lot! Regards!
Fantastic job. I love your approach and focus on detail. Thanks again!
Thank you :)
Gostaria de ter essa habilidade e conhecimento....Parabéns...
عالی بود،،،استاد ماهر ،،تشکر
Woooo!!! New video!
Haha you're preety fast!
Very nice super 🙏🏾🙏🏾👍👍
Nice job
Thank you!
You are an amazing woodworker. Enjoyed the video very much!
Thank you!