Adjustable stabilizer bar 99$ was very impressed with quality just make sure u tighten jam nut I drilled small hole 1/8 inch in the nut on one flat side an inserted set screw N/P
Cool vid!!!! I did a similar swap on my 01 Ram 1500. I used the T set-up from the 97-98.5 ram 2500s. It has worked great for over 10 years. It's weird that dodge used a t set-up for just a year and a half.
Gotta 98 ram2500. Trying to find some master pro tie rod ends to compare and yet to find a video. 😂 Really wondering if I got the wrong parts from Orillys auto parts. Seeing this video the ole farmer already upgraded the steering to what you have here… has a noice adjustable trac bar too. Which is completely shot. Would love to rebuild it but the rust belt USA has taken its toll. Good video here and it was actually very helpful.
Hey great video! I have a question if someone can help me out.i bought a 2000 dodge ram 5.9 magnum. That really needs a front end kit. Is the suspension the same between a 5.9 magnum and a 5.9 cummins
From what I’m told everything is the same except frame thickness on the 1500. When I ordered my lift it says for gas or diesel on those springs. It will give you a little more lift with the gas do to the weight difference.
When doing your own quick and dirty alignment just to make the truck driveable to the alignment shop, do you carry over the thread count/measurement from the old linkage to the new one or what?
I_Dont_Eat_My_Friends no not necessarily. what you want to do is measure the distance on your old trac bar on the truck from tie rod to tie rod then install the new one with the same spacing but make sure when you do you screw left and right tie rod end in equally to that spacing distance!
Just changed mine and have done several others the same way. Measure front and rear of front tires and have about 1/8 inch toe in, it will drive good and not wear tires bad.
Is there anything that can be done to fix the steering to help them actually make a U-Turn? Lol my single cab '94 2500 take 10 blocks to make a U-Turn haha
@peter conway that wasn't my question. When googling that, one's for $700 comes up or one's that don't have the damper shock for $300. I want to know which one he ordered.
Don’t try to order a kit from synergy. I tried in Jan and was told 2 weeks after I placed my order the kit for mine was on back order. Tried again 2 weeks ago and was told after 2 weeks and many emails was told would still be a few weeks waiting on welding and powder coating.
@@josepharuanna9924 i bought that exact arm off ebay and it did not work on my 2001 dodge ram 2500 with steering upgrade. the hole was way too big for my steering box.
What part number for the steering stabilizer? I'm having the hardest time finding a bilstein steering stabilizer. I have bilstein 5100 all the way around. Please help
Thank you so much for this video man I'm having a heck of a time with my Dodge ram I wanna try and find that part for mine but I can't find it I have a 01 Dodge ram sport 4x4 do you think it would work?
Yes, I did it on my 01. Watch out on stock wheels, I had to grind a little something (can't remember exactly what, been awhile) something was rubbing a little. Been working good for several years.
@@jaxturner7288 I installed on my 01 without much issue, if you have stock wheels the ball joint ends will rub a little, I just grinded them down a tad, also I noticed (saw a rub mark on tie rod from pitman arm were I must have hit a large bump off road? I guess some people have got a different arm to change the angle? I've had on for several years and glad I did. Although if money wasn't an issue I'd sell it and buy a Duramax 😂
Track bar was custom made by core 4x4. Synergy makes the bracket. At the time when I installed it I had to have them make it for me. I wanted my track bar to match my control arms. It’s based off the 4th gen.
Dodge off road sucks!!! Got the run around for months, had to report them to the BBB and file a claim at my bank to get my money back... over 6 months later!!!!!
@leeheckrote9923 could possibly help me with what pitman arm you used? I got the moog kit and it bolted right up to my knuckles but not my pitman arm please help 😅
Thank. You explained the upgrade and the old part well . Thanks
Good info, really clears up the upgrade and what to expect when doing it. Thanks!.
Adjustable stabilizer bar 99$ was very impressed with quality just make sure u tighten jam nut I drilled small hole 1/8 inch in the nut on one flat side an inserted set screw N/P
On amazon
Thanks for the part number, super appreciated!!
Your welcome
Thanks I just ordered it !
Cool vid!!!! I did a similar swap on my 01 Ram 1500. I used the T set-up from the 97-98.5 ram 2500s. It has worked great for over 10 years. It's weird that dodge used a t set-up for just a year and a half.
Gotta 98 ram2500. Trying to find some master pro tie rod ends to compare and yet to find a video. 😂
Really wondering if I got the wrong parts from Orillys auto parts. Seeing this video the ole farmer already upgraded the steering to what you have here… has a noice adjustable trac bar too. Which is completely shot. Would love to rebuild it but the rust belt USA has taken its toll. Good video here and it was actually very helpful.
Great video, thanks
People say the tapers on the ball joints are bigger on the 4th gen upgrade is that true
Longer control are really needed on this truck, that front axle needs to be pushed forward a couple inches
I’ll agree it could move forward a inch. I wasn’t expecting the springs to lift it as much as it did.
What's the part number for the steering stabilizer?
How did you put the steering stabilizer on?
bro whats the name of the sstainless bar behind what your doing in this video? and where to buy that one at?
Did it make a big difference?
I have same stab links lol factories kept snap n off
Hey what trac bar do you have??????? Thanks
any updates?
it good?
Red top gearbox an gearbox stabilizer kit
can i get some links to this stuff or part names so i can order them from rock auto
Hey great video! I have a question if someone can help me out.i bought a 2000 dodge ram 5.9 magnum. That really needs a front end kit. Is the suspension the same between a 5.9 magnum and a 5.9 cummins
From what I’m told everything is the same except frame thickness on the 1500. When I ordered my lift it says for gas or diesel on those springs. It will give you a little more lift with the gas do to the weight difference.
Does it work on a 2wd
Shock part #???
I need help rebuilding my front end
When doing your own quick and dirty alignment just to make the truck driveable to the alignment shop, do you carry over the thread count/measurement from the old linkage to the new one or what?
I_Dont_Eat_My_Friends no not necessarily. what you want to do is measure the distance on your old trac bar on the truck from tie rod to tie rod then install the new one with the same spacing but make sure when you do you screw left and right tie rod end in equally to that spacing distance!
Just changed mine and have done several others the same way. Measure front and rear of front tires and have about 1/8 inch toe in, it will drive good and not wear tires bad.
Torque spec ?
Tried to do it on my 98 ram 1500 it does not work on my pitman arm so I bought a 2500 pitman arm hopefully it will work
I know this comment is old but I wanted to do the same on my 96' 1500. Can you give a update on the fitment and if it works well?
Where did you that t steering upgrade from and your sway bar links ? I can't find a set to fit mine any help would be appreciated.
Rock Auto is one source, it's where I got mine.
Is there anything that can be done to fix the steering to help them actually make a U-Turn? Lol my single cab '94 2500 take 10 blocks to make a U-Turn haha
More power and tire smoke !
Nise video. Doing same upgrade on my 02...what track bar is that? Looks nise.thanks.
Core 4x4
Did you have to buy bolts for the new tie rods or were the 01 bolts the same?
Same bolts
Will this work on a 01 1500 too? Most of the info I find is about the 2500/3500
Get a 2500 cummins
What company did you get the tie rod steering bar kit from? Do you have a link?
@peter conway that wasn't my question. When googling that, one's for $700 comes up or one's that don't have the damper shock for $300. I want to know which one he ordered.
Don’t try to order a kit from synergy. I tried in Jan and was told 2 weeks after I placed my order the kit for mine was on back order. Tried again 2 weeks ago and was told after 2 weeks and many emails was told would still be a few weeks waiting on welding and powder coating.
Ordered my stuff a month a go from Synergy and installed it Yesterday. Awesome product!
Hey what model Bilstine Shock did you use?
33-170794. Bilstein
Did you need a new pitman arm or could you re use the old one?
68039930AA is the pitman arm part number you want. i heard you can use the old one but its a bad angle.
@@josepharuanna9924 i bought that exact arm off ebay and it did not work on my 2001 dodge ram 2500 with steering upgrade. the hole was way too big for my steering box.
Wats the shock part number sr, doing the same set up with the linkage on my 2001..
Part number is 33-170794. Bilstein
What type of steering stabilizer shock did you use?
lol I’m curious too , did you take a chance on one?
33-170794. Bilstein
would that mopar part# be the same for a 2002? thanks
@@douganderson7002 do you know if this kit work on a 2001 2500 cummings 4x4 , all the places selling it say it fits only 03-13, thanks
Digging the controls arms what brand u go with
Dean Ringler x2
Thanks Core 4x4
What part number for the steering stabilizer?
I'm having the hardest time finding a bilstein steering stabilizer.
I have bilstein 5100 all the way around. Please help
I’m thinking about just winging it with the b8 5100 , what did you decide on?
I went with part # 33-170794
@@lockeford23 yes I found it in here , thank you
Thank you so much for this video man I'm having a heck of a time with my Dodge ram I wanna try and find that part for mine but I can't find it I have a 01 Dodge ram sport 4x4 do you think it would work?
Yes I got it through eBay.
Just gotta order factory steering for a 4th gen
Will this part fit on a 2001 dodge ram 1500 ?
Was wondering the same about my 96 lol
Great video do you know if this kit work on a 2001 2500 cummings 4x4 , all the places selling it say it fits only 03-13, thanks
Yes, I did it on my 01.
Watch out on stock wheels, I had to grind a little something (can't remember exactly what, been awhile) something was rubbing a little. Been working good for several years.
Did you figure out anything or do it yet?
@@jaxturner7288 I installed on my 01 without much issue, if you have stock wheels the ball joint ends will rub a little, I just grinded them down a tad, also I noticed (saw a rub mark on tie rod from pitman arm were I must have hit a large bump off road? I guess some people have got a different arm to change the angle? I've had on for several years and glad I did.
Although if money wasn't an issue I'd sell it and buy a Duramax 😂
@@whatsit2ya247 01 what? And do you know what axle you have?
@@jaxturner7288 01 dodge Cummins 2500
What year model did you get the track bar?
Track bar was custom made by core 4x4. Synergy makes the bracket. At the time when I installed it I had to have them make it for me. I wanted my track bar to match my control arms. It’s based off the 4th gen.
Where did you get steering kit
Is lt stock for did year or after market ?
I got mine from Amazon a few years ago, factory part, way cheaper than those aftermarket, but also no grease zerks😔
Where do u buy this at. I need it now got ran off the road an messed mine up
Here is the Mopar part# 52122362al
@@dirtroadmechanic2444 do you know if this kit work on a 2001 2500 cummings 4x4 , all the places selling it say it fits only 03-13, thanks
Could I get the part number for that.
Part# 52122362al
Can we get the bilsten shock number please
What did you decide on
How's it feeling these days?
Driving nicely, I added the redhead steering box and it really made it all work together.
My 01 dodge ram 1500 don't have that
Dodge off road is only way to go.
Dodge off road sucks!!! Got the run around for months, had to report them to the BBB and file a claim at my bank to get my money back... over 6 months later!!!!!
@@gregoryward9620 wow too bad. there products are awesome never had any issues
Ha ha 1999 comes with it factory
I just put on the 4gen on a 1999.. with some Modification..
@leeheckrote9923 could possibly help me with what pitman arm you used? I got the moog kit and it bolted right up to my knuckles but not my pitman arm please help 😅