I have not done my first oil change yet on my new Honda Rancher 2022 ATV as we only used it to hunt our farm under 50 miles on it. Your video was very helpful ! Does not look too bad. Hope putting the cover back on won't be too problematic getting it to snap back in place. Thanks for sharing your video on Utube !
Very well explained!!! Watched this video so I could perform my first oil change on my 2021 Honda Rancher. Thanks for posting this “How To”!! It was a success!
I had the exact same thing happen to me with the oil filter. The dealer gave me the same incorrect filter when I purchased the parts from them. Their listing on the computer must be wrong. Make sure you specifically ask for the correct one as shown in this video, and save yourself some grief. I happened to be 50 miles in the bush while hunting with my new quad, and decided to change the oil at 150 km as recommended, when i too discovered this screwup by the dealer. Needles to say the quad got new oil but not a new filter, but...... I am now an expert at changing the oil as I got to do it twice.
Thank for the info , you think a old dairy farmer would know that . Never to old to learn some thing new . Don’t forget to sub , well unless you already are 😉
Hey thank you so much for taking the time to show this. Ive been watching your great videos for a while. and based on what you have shown, I bought a deluxe rubicon last fall. $500 to have the dealership here do an oil change, so I appreciate your willingness to share. Cheers from Canada
KN 140, I've noticed, a little more oil drains when I remove the filter cover. So I don't plug it until after I've replaced back the cover. Also after it cools it's a good time to power wash and clean. Where in AZ do you guys ride? Ride on !!! Oh, when I first got my 2015 I didn't snag up the fill cap, it blow off after 3 minute!!! What a mess!! Snug that shit down!!
River King , thanks for the info . Take look at some of my earlier videos . It explains where we ride . In description gives you directions . Thanks for watching .
My 2022 Honda Rancher 420 takes the 15412-HP7-A01 oil filter like you had at first. Apparently Honda started switching the filters around for some reason
This was very helpful although my first oil change on my 420 the spring on the oil filter was between the cap and the filter not behind the filter so that was some odd difference all-in-all awesome video
If you have the automatic dct 420cc with power steering, I’m almost positive it’s supposed to be like that. And the filter part is supposed to be that first one he showed. Probably the most confusing oil change I’ve ever done.
From previous vid i heard you were taking your quad for a valve adjustment .... did you see any difference in performance or engine sound afterwards? Thx
Oh okay just checking i opted to not do the adjustment recomended by my manual on the first 100 miles , i took it in to ride now and they wanted 620 dollars and my quad isnt acting up at all... i figured i could do it at 600 miles
Gustavo Vazquez . Wow I didn’t pay that at all ! That’s way to much . Try Nash Powersports . My nephew didn’t do his first valve adjustment on rancher . And it’s running good ? I just follow the book for warranty reasons . But it’s all up to the owner to make that choice
I accidentally put the engine oil into what seems like the transmission. What do you recommend doing ? Draining it (obviously) ,would you know what oil I need to put into the transmission ?
I know right !! I forgot to show that. .I’m waiting to do another oil change video on my Forman and show that . Or maybe just do short video on just that . ?? But just turn off key hold down the one button and while holding down turn on key , then turn off and on again and should reset . If doesn’t work Instagram me at Arizonakidatv and I will send pic of manual page k .
man I was changing the filter and I snapped one of the 3 bolts thank god it did not snap clean off I got it off but I'm missing a bolt I order it from Honda waiting til Tuesday my rancher has no oil in it.... is it bad that my filter only has 2 bolts out of three and having no oil til Tuesday
For The Same Price You Could Have Bought Mobil 1 Fully Synthic 10/40 Motorcycle Rancing Oil At Walmart. I Just Changed Oil In My 2007 TRX400FGA Today It Has 3502 Miles On It 250.7 Hours Since New
veggiepowered , awesome ! Thanks for the info . Will for sure look into that . I’m always wanting to save money . Please subscribe and thanks for watching .
I’m pretty sure that the 420cc with the automatic dct is compatible with that first filter. Plus the spring was in between the cover cap and the filter face on mine. Why? Who knows. Different configuration. My first oil change on this thing, put the right oil, filter with the right orientation (allegedly), and no weird engine sounds, smoke, or leaking as of right now. Letting it sit to see how it goes and checking engine oil color after I run it. Nobody has made an oil change video for the one I have as far as I know… Edited: No leaks, no running hot, smooth shifting. I’m considering that a success.
Did you have issues filling back up with oil? My reservoir fills up quickly, doesn't go down unless I run the engine, and nothing is showing on the dipstick. 2022 DCT with the oil fill just above the filter on the right side.
Definitely not a mechanic! Its called an oring, crush washer and inch pounds! Lol. He did a great job explaining it for the guy that's never worked on anything.
9 ft lbs on the filter cover and 18 ft lbs on the drain plug. Correction 9 ft lbs is for FA2 model only 7 ft lbs on all others and 18 ft lbs for the plug. FA2 gets 3.8 quarts also and the others get 2.9 quarts.
I know some guys that do lol it’s just oil , just need to make sure has conditioner for transmission cuz oil does both in the Honda . But ya don’t have to use Honda oil
I love this stuff , if I’m talking wrenches and I say 8 ?? And not 8mm ?? What was the guy thinking I was talking about if I just said 8 ?? No other tool would be just a 8 ?? I have mechanic friends and they say only none mechanics get anal over exact names lol 😂 always a good time on UA-cam lol 😂 thanks for watching
I have not done my first oil change yet on my new Honda Rancher 2022 ATV as we only used it to hunt our farm under 50 miles on it. Your video was very helpful ! Does not look too bad. Hope putting the cover back on won't be too problematic getting it to snap back in place. Thanks for sharing your video on Utube !
Look at Manual, I think if over year and mileage is low or hours u still wanna do first oil change and get those metal shavings out of it
@@ArizonaKid Will do ! Thank you !
Each time I change my oil I come and watch this video. Thanks again!
Very well explained!!! Watched this video so I could perform my first oil change on my 2021 Honda Rancher. Thanks for posting this “How To”!! It was a success!
I had the exact same thing happen to me with the oil filter.
The dealer gave me the same incorrect filter when I purchased the parts from them. Their listing on the computer must be wrong.
Make sure you specifically ask for the correct one as shown in this video, and save yourself some grief.
I happened to be 50 miles in the bush while hunting with my new quad, and decided to change the oil at 150 km as recommended, when i too discovered this screwup by the dealer.
Needles to say the quad got new oil but not a new filter, but...... I am now an expert at changing the oil as I got to do it twice.
Very well explained. Thanks.
If you turn the oil jug around so the neck is at the top is doesn’t glug going in.
Thank for the info , you think a old dairy farmer would know that . Never to old to learn some thing new . Don’t forget to sub , well unless you already are 😉
Hey thank you so much for taking the time to show this. Ive been watching your great videos for a while. and based on what you have shown, I bought a deluxe rubicon last fall. $500 to have the dealership here do an oil change, so I appreciate your willingness to share. Cheers from Canada
Thanks for watching
Wow! Your stealership sucks!
KN 140, I've noticed, a little more oil drains when I remove the filter cover. So I don't plug it until after I've replaced back the cover. Also after it cools it's a good time to power wash and clean.
Where in AZ do you guys ride? Ride on !!! Oh, when I first got my 2015 I didn't snag up the fill cap, it blow off after 3 minute!!! What a mess!! Snug that shit down!!
River King , thanks for the info . Take look at some of my earlier videos . It explains where we ride . In description gives you directions . Thanks for watching .
Thank you, helped me out a lot. Good to riding now👍
Landon Salimando , anytime , glad to help
Great video guys!👍🏻
Great job thoroughly explaining!! Thank you
I wrap paper towels surrounding the drain plug to keep oil going all over the skid plate…because it definitely does. Great video though
My 2022 Honda Rancher 420 takes the 15412-HP7-A01 oil filter like you had at first. Apparently Honda started switching the filters around for some reason
First time I’ve heard of that . But appreciate the info
This was very helpful although my first oil change on my 420 the spring on the oil filter was between the cap and the filter not behind the filter so that was some odd difference all-in-all awesome video
Crazy difference ?? Thanks for stopping by
If you have the automatic dct 420cc with power steering, I’m almost positive it’s supposed to be like that. And the filter part is supposed to be that first one he showed. Probably the most confusing oil change I’ve ever done.
@@Westisbest exactly...
@@Westisbest correct
Very informative! Thx
From previous vid i heard you were taking your quad for a valve adjustment .... did you see any difference in performance or engine sound afterwards? Thx
Nope 👎 I’ve had calves checked twice now . And it’s still the same . Doing a six things I hate about my foreman video . Might wanna watch that .
Valves not calves sorry 😐
Oh okay just checking i opted to not do the adjustment recomended by my manual on the first 100 miles , i took it in to ride now and they wanted 620 dollars and my quad isnt acting up at all... i figured i could do it at 600 miles
Sucks that they couldnt figure it out , these quads now a days are pricey youd expect them to run flawlessly
Gustavo Vazquez . Wow I didn’t pay that at all ! That’s way to much . Try Nash Powersports . My nephew didn’t do his first valve adjustment on rancher . And it’s running good ? I just follow the book for warranty reasons . But it’s all up to the owner to make that choice
I accidentally put the engine oil into what seems like the transmission. What do you recommend doing ? Draining it (obviously) ,would you know what oil I need to put into the transmission ?
If it’s this Honda there is no trans fluid ? It’s all the same . Are you working on a different bike ??
@@ArizonaKid they put the engine oil on the opposite side you did. And no I’m working on a 2020 rancher
Very helpfully
Well done👍
greetings from Argentina
Bought a ATV used and didn't get manual. What about the process to reset to oil life indicator in the Odometer cluster?
I know right !! I forgot to show that. .I’m waiting to do another oil change video on my Forman and show that . Or maybe just do short video on just that . ?? But just turn off key hold down the one button and while holding down turn on key , then turn off and on again and should reset . If doesn’t work Instagram me at Arizonakidatv and I will send pic of manual page k .
Can you put just regular full synthetic Automotive motor oil in it? Or does it need to be Honda oil?
Remember it is a trans and engine oil mix . So yes use Honda oil .
@@ArizonaKid that's pretty cool man, it's the gear oil too
@@TNsher776 yes it’s a special blind so make sure to use Honda or cycle oil . Not oil for cars .
@@ArizonaKid thanks
@@TNsher776 no worries , go to Honda web sight and can pull up any year Manual for your atv . It’s will help a lot . Thanks for watching
The rubicon 520 calls for 18 on drain plug and 9 on filter cover bolts. That's the torque specs for Foreman Rubicon though, should be similar.
man I was changing the filter and I snapped one of the 3 bolts thank god it did not snap clean off I got it off but I'm missing a bolt I order it from Honda waiting til Tuesday my rancher has no oil in it.... is it bad that my filter only has 2 bolts out of three and having no oil til Tuesday
No oil and waiting should be fine but yes need that third bolt , might wanna buy a torque wrench
@@ArizonaKid what pound torque wrench idk I'm just stressing out I feel im tighten to much or keep it to loose
@@RehmanHTX281 in manual
For The Same Price You Could Have Bought Mobil 1 Fully Synthic 10/40 Motorcycle Rancing Oil At Walmart. I Just Changed Oil In My 2007 TRX400FGA Today It Has 3502 Miles On It 250.7 Hours Since New
veggiepowered , awesome ! Thanks for the info . Will for sure look into that . I’m always wanting to save money . Please subscribe and thanks for watching .
It is necessary the honda trx Oil Filter gasket + the Discharge Washer???
I’m my opinion not every oil change . Check and reuse
@@ArizonaKid Thank you
Easy off harder to line back up plastic grommets! Wish Honda would have just put access to filter with cover like oil check side
Honestly that would be nice . Or maybe even make a engine with outside oil filter ? But ya those grommets are pain to return back on sometimes
Thank you for this video
Can’t believe Honda didn’t use a spin on filter that’s a pain🤔
Yep . They have done it this way sense they started . Would be nice the other way . Thanks for watching
I’m pretty sure that the 420cc with the automatic dct is compatible with that first filter. Plus the spring was in between the cover cap and the filter face on mine. Why? Who knows. Different configuration. My first oil change on this thing, put the right oil, filter with the right orientation (allegedly), and no weird engine sounds, smoke, or leaking as of right now. Letting it sit to see how it goes and checking engine oil color after I run it. Nobody has made an oil change video for the one I have as far as I know…
Edited: No leaks, no running hot, smooth shifting. I’m considering that a success.
Did you have issues filling back up with oil? My reservoir fills up quickly, doesn't go down unless I run the engine, and nothing is showing on the dipstick. 2022 DCT with the oil fill just above the filter on the right side.
@@TrailblazerDashcam I would go take that to a person who knows more. If you’re putting it in the right hole, it definitely should never do that.
My 2021 Honda Rancher says 3.8 quarts with a filter.
Good video
Thank you
more rancher videos please
I have never done an oil change myself. I guess, that's bad right. I get them done, I just don't do them myself.
It’s not bad , but it does teach you a lot about your car
Definitely not a mechanic! Its called an oring, crush washer and inch pounds! Lol. He did a great job explaining it for the guy that's never worked on anything.
Thanks for correcting that . I knew it would help get comments, peace out Girl Scout
9 ft lbs on the filter cover and 18 ft lbs on the drain plug.
Correction 9 ft lbs is for FA2 model only 7 ft lbs on all others and 18 ft lbs for the plug. FA2 gets 3.8 quarts also and the others get 2.9 quarts.
Just use a rag stuffed in there to absorb the excess oil coming out of the filter hole
You shouldn't have to replace a crush washer every time you drain oil. I've never replaced the crush washer on my F150 and it has 166,000 miles on it.
I hear ya . It’s everyone’s own a opinion
Do not use full synthetic oil if you have a manual clutch. This according to the service manager at the Honda dealership.
I go by Honda manual that came with my bike and thank you
You can, has to be Jaso m certified though
Turn the oil bottle with the opening on top and you’ll get rid of the ugly glug
The oil looks new .
Did that video , months ago . I’d have to watch again but ya I believe ya . Watch my diff fluid change video and the rear diff , that was black !
Anyone using Rotella T6 15w40 in their Honda?
I know some guys that do lol it’s just oil , just need to make sure has conditioner for transmission cuz oil does both in the Honda . But ya don’t have to use Honda oil
Where are you when I need you!!!!!.
Ya you called them screws. That's all. Sorry 20 years in The Air Force. I'm a little bit of a stickler for proper terminology.
Tell us your not a mechanic by telling us an 8mm socket is a #8 socket 😂
I love this stuff , if I’m talking wrenches and I say 8 ?? And not 8mm ?? What was the guy thinking I was talking about if I just said 8 ?? No other tool would be just a 8 ?? I have mechanic friends and they say only none mechanics get anal over exact names lol 😂 always a good time on UA-cam lol 😂 thanks for watching
2021 Rancher is different than the 2020
BOLTS
Number 3
I went over to you and I’m number 3
What about bolts ? Or was I calling it wrong name oops
@@ArizonaKid Auto and manual 420 use different oil filters.
8mm... 17mm...
Does 8 and 17 stand for anything else in wrenching? Think about that