Reading BMW Codes without a scan tool / BMW E90 320d / BMW CC-ID Codes

Поділитися
Вставка
  • Опубліковано 11 жов 2024
  • Please watch my latest video: "I Tested the Petronas Car Care Range | Product Review"
    • Petronas Durance Car C... -~-
    Read the codes that come up on your BMW without the need of a scan tool with these easy steps
    Link to ALL CC-ID Codes as seen in the video
    mr-fix.info/bm...
    Please like And Subscribe to the channel for more videos in this series and let me know what you think, would you like to see more of this type of content? let me know in the comments below
    You can follow me on Instagram
    / realpreshaanb
    Check out my Previous Video
    How to Clean Dirty Wheel arches / BMW 3 Series E90 / Carpet + Plastic
    • How to clean Dirty Whe...
    Can I get to 3000 Subs?
    items used to make this video
    canon 1200d DSLR - amzn.to/2pBoX7Q
    canon 18 - 55mm lens - amzn.to/2DPDUrR
    Hahnel Traid 30 lite tripod - amzn.to/2IOlgUS
    if you purchase these items using these links, I will earn a small commission which I really appreciate
    Please like this video, leave your comment
    Subscribe to my channel and share this video as much as possible
    BMW E90 320d camo design Copywrited to Preshaan Briglall
    Any unauthorized use to the vehicle (Design, or violation of intellectual property act) will be met with legal action

КОМЕНТАРІ • 59

  • @mikemulvany3325
    @mikemulvany3325 3 роки тому +4

    Arrived here through efforts to teach nephew how to interpret codes/ warnings on his 328i. Well done young man!

  • @TheBossGi
    @TheBossGi 2 роки тому +4

    Well I admit, this is actually very useful when you don’t have a scanner in hand. Thank you so much, I felt much better driving back home knowing I won’t break the car lol

  • @murrayallan1798
    @murrayallan1798 2 роки тому +2

    Beautifully explained! Saved me stressing when it was just a brake sensor! Thank you so much!

  • @jamesmccord1208
    @jamesmccord1208 Рік тому

    Headlamp error and neither of my sender headlamps on (high beams) can’t wait to find the exact code so I’m not wasting money fixing if I’m even able. Thank you!

  • @alecjordanseekola3068
    @alecjordanseekola3068 3 роки тому +2

    Thanks Preshaan. Great YT channel for bemmer freaks. Tops!

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому

      Thank you for your support, i really appreciate it

  • @remibarrera6635
    @remibarrera6635 2 роки тому

    You the man all that came up was washer fluid which was just filled , there's a leak so I'm assuming this is a common problem

    • @Realpreshaanb
      @Realpreshaanb  2 роки тому

      Either a leak on the hose connections, a slight fracture in the tank itself or a leak from the pump when spraying... for its age, its bound to happen

  • @MelvinRamannah
    @MelvinRamannah 8 місяців тому

    Good day Bru I'm from Chatsworth I just want to know were can I get a downpipe for my e90 320d 2007 and how to delete a dpf delete codes please

  • @Destinossantiago
    @Destinossantiago 2 роки тому

    Thank you very much, it helps me a lot, however I would like to know how do I delete those codes, because I’ve already changed my break lights but I still have the sign there

    • @Realpreshaanb
      @Realpreshaanb  2 роки тому

      You need to use the correct wattage of bulbs so that no errors appear

  • @francesjeffreys3103
    @francesjeffreys3103 7 місяців тому

    What does CC-ID 000 mean? My 2011 Mini says Check OK but my car pads & discs are making a grinding noise but my garage says they are okay? Advice please

  • @lafrasuys2385
    @lafrasuys2385 Рік тому

    Thanks bosso very helpful and easy

  • @rinorsulejmani5097
    @rinorsulejmani5097 2 роки тому +1

    Thank u man, god bless u❤️

  • @youngshiningking6381
    @youngshiningking6381 3 роки тому

    Great video. Also what’s the name of your ending song ?

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому

      ua-cam.com/video/8xlDwukxjnA/v-deo.html

  • @vevensundraj9621
    @vevensundraj9621 3 роки тому +1

    Thank you brother.. Excellent video.

  • @stormnoack8823
    @stormnoack8823 4 роки тому +2

    Howzit man. Whats the specs? HP and NM torque?
    Thanks.
    Enjoy the vids!

    • @Realpreshaanb
      @Realpreshaanb  4 роки тому

      Thank you for the support... Please follow link for latest dyno test results for a before and after
      ua-cam.com/video/VVLnJF7yX5A/v-deo.html

  • @conradpaul6100
    @conradpaul6100 2 роки тому

    Wow, awesome content and from south africa too!! Is there any way I can chat to you personally?

  • @diecksl
    @diecksl Рік тому +1

    Thank you, this was useful!

  • @parthsharma34
    @parthsharma34 Рік тому +1

    Thank you very much

  • @victoriabird3994
    @victoriabird3994 3 роки тому +2

    Great help! Thanks a lot!

  • @NM-hx3cr
    @NM-hx3cr 2 роки тому +1

    Thank you :)

  • @ikansepatks
    @ikansepatks 6 місяців тому

    Great stuff

  • @louiseoliver7673
    @louiseoliver7673 2 роки тому

    Thank you!

  • @ryajones691
    @ryajones691 Рік тому

    Thank you 🙏🏼

  • @MounT10GaminG
    @MounT10GaminG 2 роки тому

    Thanks for this

  • @swapnilshilamkar2101
    @swapnilshilamkar2101 2 роки тому

    What is baseline ccid number in vehicle

  • @kumarpremjee4676
    @kumarpremjee4676 3 роки тому

    Hi Preshaan, Thank you for this however i am getting error code CCID 29 which states "CC-ID 29 - Engine Problem, Power Reduced " on the list provided. What do i check for ? Engine problem could be various issues.

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому +1

      That you will need a proper diagnostic done on your car... Many contributing factors lead to that specific error

  • @goodnews559
    @goodnews559 2 роки тому

    So perfectly explained. Thank you sir

  • @shahilshahil7741
    @shahilshahil7741 4 роки тому

    I have a e90 2011 320i just programmed a new spare key and changed original key battery however car does fails to lock or open using the remote I have to manually use the key to lock and unlock fuses where also replaced please can I have some advice

    • @fordy2697
      @fordy2697 2 роки тому

      Had a similar issue. Took it to a dealer and they said there was no signal being transmitted from the lock button. Maybe the key itself

  • @dianenelson112
    @dianenelson112 3 роки тому

    I place the keyfob in then I press the start/stop button without stepping on the brake but I can't get pass that step like you, bcause after pressing the start/stop button the display shows a yellow exclamation mark and a constant ding sound, then I try to push BC and nothing happens. Help please.

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому

      Close your driver's door and the exclamation mark will go away... Then try👌🏼

    • @dianenelson112
      @dianenelson112 3 роки тому +1

      @@Realpreshaanb I'll try it. Thanks

  • @derin111
    @derin111 3 роки тому

    Took the driver’s window control module out of the door and disconnected it. Now, once reassembled, always getting a warning sign up on the dash. Is there anyway to reset and clear all the error codes without a tool? Thank you.

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому +1

      Try doing a full cycle on the window by opening and closing the window all the way, if that doesn't work then you'll need to take it in for diagnostics

    • @derin111
      @derin111 3 роки тому

      @@Realpreshaanb Thank you so much for such a quick reply.
      I just tried what you suggested. Unfortunately, it's still flashing up a bulb symbol warning on the dash.

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому

      A bulb warning means one of your light bulbs are burned out and need replacement 👌🏼

    • @derin111
      @derin111 3 роки тому

      @@Realpreshaanb But we've checked all the lights and they're all working normall?....weird.

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому +1

      In those cases, inspect the bulbs physically, if they're turning black, they would still be working but will cause an error... It happened to me before 👌🏼

  • @rik3364
    @rik3364 4 роки тому

    I have a 2005 320I e90 BMW smoking a bit and smelling burn oil from exhaust / reverse light not working. Can't fine reverse switch..

    • @Realpreshaanb
      @Realpreshaanb  4 роки тому +1

      Reverse switch will be on the gearbox itself, as far as the oil is concerned, it could be valve stem seals that need replacing

    • @rik3364
      @rik3364 4 роки тому

      @@Realpreshaanb thank you so much!, keep up the good work and stay safe.

    • @MygenteTV
      @MygenteTV 4 роки тому

      bro here are a list of problem you may want to check to find out which one is the one you have. 1) maybe your plugs are up for a change, 2) your Intake manifold just broke, there is a stick that holds the flap swirl and these car be breaking them. just open it and remove them all, even more since those can go into your engine and break pistons, also this problem will make your car use more gas and be more slow. 3) probably a bad PCV. i will try to post more videos of my car in my channel addressing some of these problems and how to solve them

  • @ataroosa8271
    @ataroosa8271 3 роки тому

    What does the 249 mean next to the triangle ?

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому

      That's how much I've traveled since resetting my trip the other odometer

    • @ataroosa8271
      @ataroosa8271 3 роки тому

      @@Realpreshaanb how do I reset It?

    • @Realpreshaanb
      @Realpreshaanb  3 роки тому

      Press the button on your cluster...

  • @joao_matos
    @joao_matos 3 місяці тому

    Not all errors will show on display, you will need a scan tool anyway...

  • @rockinrake856
    @rockinrake856 4 роки тому

    Hey when I do a check it shows Ok.. but I have that weird number next to my mileage?? Its a bmw e90 320d..

    • @Realpreshaanb
      @Realpreshaanb  4 роки тому

      Please DM me a picture so I can see what you're talking about 👌🏼