How to Update Terminator X firmware the easy way (handheld and ECU)
Вставка
- Опубліковано 5 жов 2024
- hopefully this makes it easier for a lot of you
=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=
Check out SloppyMechanics.com for links to commonly used facets of sloppy.
check out our shopify store
sloppymechanic...
if you would like to send things,
and you most certainly do not have to,
but if you are feeling inclined to do so!
please mail to:
Matt Happel
175 N Chestnut St
PO Box #142
Bath PA, 18014
----------------------
thank you to
Codion Motorsports ( / codion-889312128079667 )
Reversion Raceworks - Dash Inserts
/ reversionraceworks
Monkey Fab MFG - (monkeyfabgarag...)
Holley performance (www.holley.com/)
LSX Specialties ( / lsxspecialties )
Dirty Dingo Motorsports (www.dirtydingo....)
Snake Eater performance (www.snakeeater...)
Summit Racing LS (www.summitraci...)
Brian Tooley Racing (briantooleyrac...)
VS Racing (turbo4less.com/)
Warr Performance (warrperformanc...)
ICT Billet (www.ictbillet....)
Thank you - i was able to do the v2 build 70 over usb cable without the SD madness and silly steps. But today had to do this for v3. It worked fine. Thanks for sharing
Thank for making this video made the process easier for me. Just updated my handheld to v2.0.5 and ecu to v2.0.8
I’m waiting on my terminator x to show up I’m swapping from Stock computer to holly. Thanks for everything you do for us.
thanks matt you make it look like even an old boilermaker can do it
thanks, a complete video, all the steps. not half like the Holley video. saved me from sending the unit out or having someone come over to rescue the ecu. Awesome....
That “launcher” is awesome.
Thanks Matt. Been semi stressed about this.
This makes Holleys video on downloading look bad… Thank you for making it easy!
Holley is a bad video IMO
Thank you for this awesome info and simplifying this process!
Thanks Matt!
Can you show how to safely update Holley 7” dash and Terminator x with just a laptop. WITHOUT the LCD screen and SD CARD.
Hey it's back
Yeah missed a whole middle section like a newb
The new version has a feature that lets you do barrel rolls like Michael Hastings
Never delete the content. If update fails and you need to return to last known good configuration you're screwed. Save the card content until update is complete dude.
i said in the beginning this is a guide if you have done nothing but pull out of box and hook up, so after this you can use the v2 wizard and start fresh
@@SloppyMechanics yeah, In all fairness maybe the terminator x is different? However, I bricked an hp ecu and had to send it to Holley, they weren't able to recover it, said if I had kept the file that was in it they may have been able to recover it. Wasn't splitting hairs bro, just hoping to help someone avoid a very expensive mistake that I have made. In my case it was an older ecu and not covered under warranty, 1200 bucks down the drain. Honestly, wasn't trolling. Love your vids and content, get a lot out of them.
As a side note, the hp/dominator are particularly sensitive to voltage spikes and variations. In my case I had a low battery and figured it was ok being on the charger, so I'm not faulting Holley at all. It was my mistake. Moral of the story have battery fully charged, if on a charger while updating make sure it is a quality charger and nothing more than a low amp trickle charge. I'm not the only one, guys have killed dominator ecus jump starting their cars and using high amp boost chargers. I'd have to assume the lower price terminator x and xmax are even more susceptible to this? At least they can be opened up and repaired, a fully potted ecu is junk if you pop the power supply etc. Rant over. Just makes me cringe thinking about someone else trashing a new ecu doing what I did. Nothing arced no fuses popped, it simply froze while updating, tech said it probably corrupted the file. So please guys be careful, read the manual thoroughly, and make damn sure you get it wired per the manual. I was doing exactly what you do in this vid with a battery charger hooked up when it happened.
How did you build your bench harness can you make a video on how to build it
Great information!!!!
Great video! Holley doesn't tell you how to get to 2.7. they tell you its the latest software on the site, then you download it and get the mismatch error.
Awesome video!!! Thank you
Can you teach us how to make the bench harness please
Thanks for the tutorials
Do you need your spoon back?
Yay!
Thanks so much
i wonder if you can update this on any andriod or phone with an SD card slot. i guess one of us will have to try it.
Great video man!! I do have a huge favor to ask, my saved GCF goes to open with media player, I try open as and I don't get a way to suitch it to .terx I deleted everything from terminator x and loaded again and nothing makes it work, tnks before hand!!
So for the first time firing the car can you set all your I/o with the hand held or do you recommend using laptop
Yea updates definitely suck on the HP. Took so long the first time I updated mine I though it had frozen up halfway through.
By putting the new firmware on the lcd card it will upload much faster. Or update to v5-v6 and use the USB/can adapter. The firmware update takes mere seconds that way. Speaking terminator/hp ecu here, not terminator x.
@@b.c4066 there’s no LCD card on an HP brother. That was the point.
@sloppy , can you ask holley if they would enable input B21 for the gm transmissions, Looks like on the 4r70 its an input that can measure line pressure. So we could monitor line pressure without using one of the 4 main inputs..
what exactly do you think he is going to get them to do that you cannot ask them to do? ask them, get others to do the same. if they get enough requests and it is plausable they will include it in a future update
I need a video on how to update through the 7" screen or through the usb directly connected to the can connector in the harness. My Terminator didn't come with a 3" screen so unfortunately this one doesn't apply to me.
Updated the firmware. Engine just pops and sputters. I have Snakeeater truck injectors. What setting do I use in the wizard for those?
Sweet
I like Q16 fuel, semi dry sumps like a C6 Z06!
I just did all this exactly and followed your video twice to make sure I did not make a mistake but when I download those files there is no “tslcd” file loading from Holley to update the handheld…WTF HOLLEY? Can I get somebody to send me this file and just download it onto my SD card in the proper place? My ECU updated but my handheld did not so I can’t get any of the wizards to work and I’m dead in the water
I did this following your video and when i keyed on, at the bottom of my 3.5 the new 2.0 fw is loaded on but its booting up so fast i can hardly read anything up at the top of the screen but after afew power ups it did say sd found but below that it said fw not found? Im so stumped i have a bad feeling somethings wrong with my ecu, out of the box iv had nothing but issues. This has been a year later after instal of my terminator x max and still not on the road ugh, iv had it runing but falls on its face as soon as i put in gear
I’ve Just got work out how to update my terminator fw from my pc as I only have a pro dash
I have been trying to update for 4 days straight. I got a deal on a forged 58x rotating assembly but I have Gen3 6.0 block. Trying to upload a custom tune But need updated first I have spent over 10k on build an won’t start Getting pissed
Right on, not sure why this is scary for people
Where is the tune stored , since you erased the sd card ?
you would copy it out of the holley GCF folder, i said in the beginning this is a guide if you have done nothing, so after this you can use the v2 wizard and start fresh, if you already have a tune file you need to copy it off or save it with a laptop etc and re load it with v2 software
@@SloppyMechanics Thanks . I'm still useing your how to wire a microsquirt instructions .
Have you ever tried to “downgrade” the firmware?
So will this method work on the terminator hp? I have a new 3.5 touch screen and need to update firmware on the ECU. Thanks!
Anybody know why the laptop wont upload from the holley?
How do u update ur tune file from v1 to v2
You just open it with v2 and it will convert it
@@SloppyMechanics thanks matt
@@SloppyMechanics Tried to update from V1 to V2 build 80. No dice. Was told (on FB) that I had to go to V2 build 50 first, then update to 80. Is this true? I cannot locate the build 50 file on the website. All Holley is showing now is build 80 (SD card contents). Seeing that Holley just has 80 on the site, I am thinking you don't have to go to 50 first. Maybe I need to slowly copy each file one by one to the SD card, as some have suggested it worked for them.
well Mat, because you showed that , now you'll have to show how to unbcrick it ...lol
Not a terrible idea, I’ve never had one go bad
Holley has a 7 minute video that goes through the process.
For those that already have a tune file in their ecu and aren't starting from scratch, they show you how to first save it to the handheld when it's connected to the ecu, then dragging that file out of the sd card contents before deleting everything on the SD card.
ua-cam.com/video/LjQk1r2uvIA/v-deo.htmlsi=mc1Gl_HQALvjYBxk
Hey Matt Happel, will you tune my car?
Personally I blame squirrels
My ECU instantly shit the bed after trying this
Was my digital dash causing it. Holley tech support rules
Having same issues how did you resolve it
Holley should just hire you as a tech support engineer, because whatever there spewing is shit.