New Holley Terminator X V3 Software Update! Test Outputs? Lambda?
Вставка
- Опубліковано 21 сер 2024
- *There has been software revisions since this video was made - its possible some things may have changed**
*Holley V6 build 300 is also now available, I assumed it would be V7 (as mentioned in this video) but I was incorrect*
Want to Learn How To TUNE Holley Efi, Terminator X, and Sniper?
www.tunethetri... ---- Cick Here! - Авто та транспорт
The 6l80/90 is definitely a surprise, its nice to know that they been listening to their customers
This is HUGE! Shout out to Holley for hooking us budget guys up!
Joe Simpson is the man. Glad to see your influence in the changes.
Oj Simpson is the man.
This is a major upgrade. Kudos to Holley for not coming out with a bug fix only update like a lot of products and trying to stay ahead of the competition by adding real features.
Super helpful video & update. I am one of the pant poopers for Boost Controller P, I, D values so this will be awesome!!!
Joe you’re making Holley great again!😊
Just add that (for anyone that didn't notice at 15:34 ) when you toggle Compare on/off in Data, even though it removes the traces off of the graph, all data numbers (from both runs) stays up on the left 👍
Thank you, I wouldn't have known they updated upgrades software. Just sent them an email about load in PSI by RPM!
Load is in kpa or psi by rpm (your choice), what was your question there?
Just stopping to say I have been watching a long time and the production value on the videos is incredible these days. Keep it up, content has always been A+, now you’re making some really easy to watch videos to go along with it. 🤘
I overshoot so I’m really excited for the new dome and manifold control. Good future video for tune the trilogy 😉
Now you have 100 more videos to record and teach Joe! Thanks for the overview! I look forward to you using the new boost control method and showing it!
I created a never ending job for myself haha
I’ve actually been holding off on the boost control videos waiting for this release.
I have experienced the white screen while hooked to a tablet, but never with my laptop. Super happy about changing the fans to only run when engine is on too!
Much needed updates. I find it ironic that I made a custom parameter for my T56 and electric fan to not run with the engine off last year and Holley makes a dropdown for both.
Awesome video Joe. Being able to change the line colors is pretty cool since I'm color blind. "look at the red and green lines" "Yeah you're going to have to point to them" 😀
This is huge - Thanks Holley, and Thanks Joe for explaining these!
The Dashboard feature is great news! Being able to see all the timing and fuel modifiers live will be invaluable.
Good work Holley!!
OMFG! LAMBDA! I've wanted this forever!
This was huge but surprised still no map based boost control.
Right!!
I control mine by map based on a terminator x max
@@brandonpylant5764 there is no map option in the drop down. You can split the map signal and tell the ecu it’s in the dome and it works decent but not perfect
@Mike Rawtch mine works pretty good splitting the signal. It keeps it pretty stable on boost
It’s right there. Open loop - duty cycle. I been using it on my dads car & works great! No dome sensor needed. Straight off map sensor.
Great info !! One thing is like to see if a way to go into a dyno mode for holding gears and locking converters. Obviously you can go and trick the Ecu to not downshift and for lockup to stay on like I do but would be a nice touch to save time.
Yea that would make life easier
Finally TermX is almost as versatile as MS3
omg, finally my line colors stay the same.. used to have to populate the logs certain way to get the colors i wanted..
Thank you for the update!!!!
Awesome 🤘🏻
cant wait to update and try out the converter lock bug fix!
They could've skipped the traction control and added 2 more advanced tables and it would've made my day lol. Just 2.
Nice, can we simply drag to scale making the VE tables bigger? for people like me that are blind on a smaller laptop screen. On a desktop 22-24" it is out of proportion not scale able or haven't figured out how to do it yet. My thoughts are Megasquirt based were you have complete control, I like how the datalogging update is similar to MLV. Great vid.
No but you can alter your windows settings to change how it displays
@@JoeSimpsonAtTempest Yeah, we do that just gets old having to reconfigure for other programs when your in between. Holley should pay attention to this with this next updated version adding more functionality. Thanks for all you do and the reply.
Great video. Thank you and holly 👍🏽
I just broke my trans last week…😢 I have to get it fixed to try this stuff out
Awesome
Interested in that TKX harness and parameters. I made my own for the vss and had to do some funny numbers so it would output the correct mph. Never did get it to work :/
I did the same thing for my t56 magnum xl. Used the auto trans with all the math to get mph, but it works great and it’s accurate.
Tune the Trilogy pre-sale, hoping that runs another 2 weeks? Been saving $100 a paycheck and I’m all in May 5th
It will. I wont have time to adjust the website between now and then
Very good!!
If you don’t have a dome sensor hooked up will it still catch the boost on the MAP sensor, giving closed loop map based boost control? Another great video. Cheers Dave.
It would be nice if the Chrysler Future transmission support is NAG1! 🤞
Hopefully they release Gen 3 Coyote/ 10R80 one day
Biggest thing I'm liking is the fan. It's annoying having the key on and the fan is running wasting power.
There is a really easy fix for this, a guy on here has a video on how to do it. Search for Holley fan control
This is awesome and im a beginner and see the great benefits i cant do them yet but ill learn , i do have a question im new to this and just downloaded v3 term x how can i get a tune from v2 to v3 thanks
Damnnnnnnnn crazy
New update with the wideband “if it reads greater than 33.81 AFR it returns back to open loop “ !!!!!!!
Yup awesome feature there
Awesome video, so now I have the option to have the air shifter have different shift points between 1-2 and 2-3 shifts on the th400. But do I have to hookup an input to tell the ecm what gear its in? Or does it just do it accordingly related to transbrake input release?
Did they do anything with the boost builder floating rev limiter? All this is great can’t what to update and try it!!
Any advice how to update the software....I'm no laptop person...how to save tune I already have....thanks
I’ve been asked this about 60 times already today. I’ll try to make a video on how to do it tomorrow.
It will require a software and a firmware update
Thanks
With the new software improvement, can I finally flash new firmware without having to unplug the entire canbus chain? I’ve had tons of problems in the past with even splitters from Holley causing bricked ecus during the update process. On some of the custom cars I work on, unplugging everything chained together on the canbus side can be a huge pain.
Great video as usual have they give an idea of possible release on the v3?
It released today. This video was done a while ago i jisr wasn’t able to post it until the software was released
Joe. Whats up with your recent videos being flipped 180? Seeing how many are paying attention?
maybe a dumb question i’m building a 83c10 getting a nitrous ls and a 4l80e not a lot of dig racing around me more roll racing is there a way u could set the trans up off a button maybe to hold say 2nd gear longer so u can be higher in the rpm range off the initial hit vs having to wait for the ecu to down shift the transmission? thanks.
In reference to the transmission control updates what is CAN 2?
What’s up question how to enable TPS autoset on 3in hand hold?
Awesome update! where can I purchase the F5 flash device for the 6l80e, I can't find it anywhere.
I don’t think it’s available just yet
Random question but is there a way to auto start a log off of trans brake release?
Hey mate love your videos! Do you like flex fuel? Or 2 separate tunes??
Long winded answer there but adding a flex fuel sensor and having one tune is much easier.
I'm doing a ls swap in my old truck. Getting a built N/A 6.0 ls. A gen 4 GM harness and computer comes with it but we need a dash and fuel gauges as well. Wanted to know what your opinion would be to just run the gm and get a obdII dash or get a holley and run one of their dashes? Hear mixed reviews on holley... any info would be great!
Holley. Easy answer haha
Hey Joe what firmware on the 7’ digital dash should be used on ecu firmware v3. Tried updating my dash and it’s now not giving me the tabs ( config, utilities, dash….etc)
11:00
Nice any update for the Holley Sniper coming soon?
Not that I’m aware of
I have an ly6 that has the vvt. Would the terminator x be able to control it with the stock cam and the vvt system?
It looks like the icon for having two panes open side by side is there as well. Is that going to be in the final release?
It’s been there since the last v2 update. The final release is what’s available and live on their site now
Clearly I need to keep up…! Thanks!
what would be a good injector brand or your recommended injector for a 62lb hr based off your experience?🤷♂
Snake Eater injectors
Do i need to click download from ecu - click on save GCF and rename and save. On handheld If going from v2 to v3 or isn't that tune already saved? And can just Remove SD and put in computer and go from there as i did going from v1 to v2
wen are we getting the holley still waiting for it to be shipped ???
That’s a question for whoever you bought it from or from somebody who works at Holley
Is tje realeased version stable i been hearing its killing ppl ecu but i never know if its their mess up and not holley
😮😮😮
Injector Group not listed - GM 12561462 for my 2004 GTO LS1 engine. Do you know how I can get this right in the wizard? I use Terminator X Max
Is the software out yet?
Yes, as of today.
missed the fix for o2 reading max lean before its warmed up causing severe rich condition
Yea that would have been a nice add on. Can fix it with custom tables though
@@JoeSimpsonAtTempest sorry I mean you missed it in the pdf, they've added a fix for it! Read the bottom of the screen at 21:45
@@vornice7604 oh yea. Are you talking about the max lean over time thing? That was an awesome update i guess i did forget to put that one in there
@@JoeSimpsonAtTempest yeah that one, I'm tickled pink cause it was happening to me occasionally.
@@vornice7604 yea that was an awesome update. I do wish they also added a min time before closed loop enabled but this works awesome too
For your tuning course is a dyno machine needed to tune learn how to tune or can you test on a closed “wink wink” road?
We are 100 videos in and have not been on the dyno yet. You can apply any of it to anything using Holley efi in any situation So, no dyno needed haha
It surely helps though. Especially for timing.
Joe looks like your website is down ?? Can’t hit the home page
working just fine for me?
Damn, no LV1/LV3 support :(
Where are you located? I need a tune!
Do you see rpm limit offset boost builder table coming?
If they didn’t add it here than probably not. Maybe down the road but I’m sure there was some reason why it wasn’t added
How do i update my terminator max
I seen in the trans tab it says t56 does that mean regular terminator x will recognize the factory speed sensor?
I doubt it. I’d imagine you need that extra port on the ecu to hook the vss up. Like the max has
Ooooor….. if maybe your using a ProDash, which has speed inputs. Tho it prolly wishful thinking the V3 for TermX would maybe allow data transfer from the dash TO the ECU. Like it does w HP and Dom. HOLLEY!!! Y’all listening??
Will this update allow 2 wideband sensors to be installed for closed loop control? Or is that Dominator only still?
Will always be dominator only. It’s a hardware thing
@@JoeSimpsonAtTempest Thanks for sharing that info.
Can we use a 02 sensor that doesn’t die every few months
Buy a holley HP with a NTK, it should last a long time, but if the tune is too rich it will still shorten its life in general as well.@@mrphiscal
Do you still need the term x max to use the trans functions or is in both the x and x max
It’s going to be the max. You’ll need a way for the trans to talk to the ecu and the non max does not have that plug.
@@or-ian6973 do you think the x can control dump valves on a glide
@@sbfnation2535 sorry I don’t know. I’m a novice user myself.
@@sbfnation2535 is it something you could use outputs to control?
@@or-ian6973 Im pretty sure that’s how you do it. I gotta look into it more
for the terminator x; is it possible to downgrade the firmware back to v2 if I go to v3?
Yup
Have they updated sniper software as well?
Not at this time
@@JoeSimpsonAtTempest ok thanks
What do we do if we have a v2 setup?
Update your software and firmware. Easy and all free
holley still have no VVT
Hp and dominator do