Driverless LEDs have a problem: low frequency (~ 100Hz). In this light, you can be no more than 7 minutes, then the eyes begin to get tired. The pulsation norms should not be lower than 300Hz. The lamp you made can be used in the hallway, porch or on the street, but not in places where you spend a lot of time. The best repair is to find out the burned out LED and solder the jumper or solder the LED with identical characteristics. Good luck with the repairs!
It cost lest than five dollars to buy a new light. You actually replace the whole plate of LED lights is that worth the fix? I usually replace one of the Led light that is burnt and use it for another six months.
@@newtechaudios9218, As per video the 220V Ac supply is connected directly to led plate where low volt ac(12 to 15V) is needed; so in my opinion all the LED s will burn instantly while the power line(220V/ac) is on.
The world's best teacher thanks
Big Fan Bhai Awesome 👌
Thankyou 🙏
This is such a dope video!
Ok
Wowwww good job bro
Thankyou 🙏🙏
খুবই সুন্দর আইডিয়া চালিয়ে যাও তুমি আমার তোমার সাথে আছি
#soyebdiy
Thankyou 🙏
Sorry, It's not a repair ! it's just how to use the lamp container
You can say
Good work 👍 keep it up
#technicalshahzada
Thankyou 🙏🙏
Driverless LEDs have a problem: low frequency (~ 100Hz). In this light, you can be no more than 7 minutes, then the eyes begin to get tired. The pulsation norms should not be lower than 300Hz.
The lamp you made can be used in the hallway, porch or on the street, but not in places where you spend a lot of time.
The best repair is to find out the burned out LED and solder the jumper or solder the LED with identical characteristics.
Good luck with the repairs!
Correct bro
I used as a outdoor light since last 6 months
Nice video-
Thankyou 🙏🙏
Yeh it is a good idea but it is heated alot
No problem.
Mst hai bro
Thankyou 🙏
Correct timing bro😂👍
Thankyou 🙏
Best work
Very nice
Thankyou 🙏
😉👍
*Muchas gracias amigo*
_muy buena solución_
Dónde se consiguen las placas de repuesto 🙄☝❓
Saludos 🖐🙂
Sir esp2866 with Arduino nano wala code node mcu me work karega if nhi to kaise krega ....
Nehi
Need some changes code with proper library
Kon sa wire use kiye
Sir apke pixel led Matrix me imojies 🤪🙃🙃 a sakte hai kya
Text emoji depends on library. This library not support emoji
Sir please help me i will fix in my t shirt for impresing
Every one imojies kaise challenge
Sir apke previous video pixel led matrix wala code esp32 me work kar sakta hai kya nhi to kaise krenge?
Proper work nehi kiya. Mya bhi try kiya tha
Nice
Thankyou 🙏🙏
@@easytechzones Welcome
Jo tools use kiay hain teak karnay ma in ka name bata dain
Big fan bro 😍
I have a doubt I hope it will be clear.
Which resistor I use for a 3v 8mm led power supply using 4v 1ah battery
30 - 47 ohms pe koi bhi resistance sehi hya
@@easytechzones ok thanks Bhai 😍♥️
Ñīçé BrO
bro you changed the led set then we directly that bilb led ka light set it blost
How is Circut fitting please Explaine C1,C2 fittings ic
Led display bnaiye by wifi control wala please
Ok
U
Not
Fitting
The (printed circuit board). ?
Not need because it driverless led
Bhai LED plat kaha se milegi,plz batao
Local electronics shop pe
But what about circuit ?
Sir please make 12v battery low protection circuit.🙏
This is not repair. This is called replace.
Ok
The best repair is to find out the burned out LED
Bro it is a driverleess led no need to use led driver do not blame me
It cost lest than five dollars to buy a new light. You actually replace the whole plate of LED lights is that worth the fix? I usually replace one of the Led light that is burnt and use it for another six months.
😇😇😇😇Bhai mai ek electronics ka channel banana chahta hun isliye koi bhi mujhe channel ka naam suggest kar sakte ho kya.👇👇👇👇
Karya wow
Led panel kha milega bro
Local electronics shop me
DOB to mov why not use sir
😉
You have used 18 watt LED
What about the watt?. How much it'll consume?
This is 15 watt panel
भाई जो led बल्ब पहले निकाला वो तो नही है दूसरा वो अलग है और पहले वाला अलग है
👍
Thankyou madam
If led is faulty then how we fixed it
How is it possible that the lamp to glow without power supply module ?
There is drive on led plate
@@newtechaudios9218, As per video the 220V Ac supply is connected directly to led plate where low volt ac(12 to 15V) is needed; so in my opinion all the LED s will burn instantly while the power line(220V/ac) is on.
Ye repir hai kya
Led pannel price??
₹30
@@easytechzones thaks for replying
Mov not connection and not protection
Today my led bulb not working to put video currently
Really??
Mm just capacitor burned
2nd
Yes 2nd
Bakwas hai
Hindi english banla telugu tamil kannada malayalam you indian ?😊😊😊😊😊👌👌👌👍💐👍💐👍
Yes
Logo ko chutia bana raha ho tum.
Where is led driver?
Parna ate hya?
A led panel driverless hya
Yeah kaise repairing hai, drive ko hatakar dob se replace kar diya.
👎👎👎
Driverless 220v led panel kaha se aur kitne ka mil jata hai....
Local me 30 rupees mya mil jayega