Très sympa cette fabrication, par contre dommage d'avoir laissé les écritures sur les bâtons de colle, est-ce que vous avez essayé de les retirer avec de l'acétone ou en les passant au papier de verre, sinon pour le reste c'est top, bravo et merci pour le partage 👍 Very nice this production, on the other hand a pity to have left the writings on the glue sticks, have you tried to remove them with acetone or by passing them with sandpaper, otherwise for the rest it is top, well done and thank you for sharing 👍
Beautiful project! Simple but impressive! I would put a white wire in the center of the glue tubes. Can you explain to me how LEDs change color with only one wire (in addition to ground and Positive) ??? Thanks!
Very nice, compliments, I recommend not to connect directly all leds to the arduino outputs, but to use transistors as a buffer (type BC337), so as not to load too much arduino otherwise you risk damaging the outputs :-)
Thank you for this amazing idea! I had a surplus box of these sticks that were lying uninspired until this! I myself will be using a Wi-Fi RGB controller and a solar charging lead acid battery to power mine. I've not (yet) done any Arduino work other than with my laser etchers but programmability means the light pattern variations are endless! *Edit* Subscribed, Thumbs up and Bell clicked too!
Супер майстер ! Прошу зніміть подробно відео по прошивці даного девайса , для новачків !!! В оригінальній статті є 3 скетча для прошивки, який саме використовувати !!! Дякую Вам дуже !!!
The world need more of this.
Osm amazing👌👌👌
Thankyou 🙏
... молорик!-, шариш в электронике!-, отличный получился сувенир, красивый ночник, можно будет на лаживать
Nyimak kawan.... Salam dari Indonesia 🙏
Super and simple 👍👍
True Engineer you are 👍👍👍 Awesome Brother
VERY GOOD JOB . ¡ WOOW ! VERY COOL 👌👌👌👌👍👍👍👍👍👏👏👏👏👏👏🆒️💯
Loved this amaging idea and background music.... 👏👏👍
Yap
Aswome very nice beautiful
Bhai mujhe 25 led 5mm ki 5v 2amp se jalana hai kya lagaye jo led fuse na ho aur jyada se jyada light de
Led ko parallel me jode ya series me
Nice work.
Thanks!
I am from Uzbekistan and I am a fan of you
That's totally awesome
Very nice creative ide good job
Hi sir how to set program in nano pcb card
mast bhai
bro i tried to upload code to my aurdino but it says that there is no library
but i have neo pixel library in my pc what to do
Très sympa cette fabrication, par contre dommage d'avoir laissé les écritures sur les bâtons de colle, est-ce que vous avez essayé de les retirer avec de l'acétone ou en les passant au papier de verre, sinon pour le reste c'est top, bravo et merci pour le partage 👍
Very nice this production, on the other hand a pity to have left the writings on the glue sticks, have you tried to remove them with acetone or by passing them with sandpaper, otherwise for the rest it is top, well done and thank you for sharing 👍
9999
Thank you for this interesting information, good job bro
*Jolie lampe décorative.*
Good amazing
so amazing bro wonderfull i no see this type of light on youtube
Thankyou 🙏🙏
wwe Roman empire lover do a search for Neopixel. UA-cam is full of examples.
@@davidgeorge8541 thanks bro for help
@@davidgeorge8541 ya idea nahi tha bro neopixel ma to bhi na led matrix be banaya ha
Was surprised that you used CA glue to attach glue sticks to square frame; why not use heat and melt, fuse the edges? Neat build.
ua-cam.com/video/YLfwbr-5PxM/v-deo.html
Osm wonderful project sir!👍👍 SSK FZR PUNJAB
Cool!..😎... Thanks for sharing... ✔✔✔
Beautiful , please share accessories for making
Check description
Wonderful ... Bro... Bht khubsurat hai.. tq
Great 👍👍
DP SWITCH PROTECT LIGHTNING IN SMART TV -ALL ELECRTONICS ITEMS,,,
LED TV,SMART TV ,HOME THEATER ,COMPUTER,LAPTOP ETC ,, seeeee the more information
@@justinkv02 ???
Waw nice video sir
Very nice boss 👌
Made something similar with acrylic tubes, epoxy mixed with led diffusion. Cool project though...
Sweet build. A little extra money on heat shrink not in the budget?
Nice idea and craftwork man
Awesome bro 😍😍
Very nice bro....
Awsome creative idea
Very good 👍
You are muska man so much😁😁😁😁
Supper brother 👍✌️
Awesome video
Супер 😍💓красивая!
Hello.I haven't seen your channel before and thought that I was the only one making lamps on glue rods.
Beautiful project! Simple but impressive! I would put a white wire in the center of the glue tubes. Can you explain to me how LEDs change color with only one wire (in addition to ground and Positive) ??? Thanks!
Here i used ws2812b led. On individual led have one control ic inbuilt. So need only data pin against gnd
@@easytechzones Thank you!
Suppr 👍🔥
Excellent 👌👌👌👌
link for all item uses in this video??
Very nice, compliments, I recommend not to connect directly all leds to the arduino outputs, but to use transistors as a buffer (type BC337), so as not to load too much arduino otherwise you risk damaging the outputs :-)
Yes Agree 👍
Omg really amazing 👌👌👌
easy, simple but super
Thank you so much 🙂
Good....Hard work...tough....
let us forget this channel name is easy tech 😂
super
Very nice wonderful job well done bro
Vo sarkit konsi he
Bahut acche projects banate ho aap, kya hume in sb cheeso k basics sikhane k liye koi video bna skte ho?
Nice
Ye light milega kitna repay men
Loved your ideas 😘😘
Sir how much cost this equipments
Very very good thanks you so much
Very nice....
Thanks
Can I make this for my school EMC programme?
Yes
Thank brother 💕💕💕💕
Ayise Colour full led 4 banana ke decoration Use kar sakte hai
Sir mujhy chahiye to kya krna hoga btao kese le sakte h aapss
Verrrry nice
Thanks
Your video is great sir
How are you doing today sir.
Have a nice day sir.
Thanks, you too!
@@easytechzones Briliant idea sir
Nice. Instead of the black wire between the upper and lower platform you should use a white pipe . :)
Yes
Ii
.@@omarguerrero4076
Nice video 👍🏾
Are bai in items ki links do
Bro ye light ki details cha ye
Bro Good work
Very nice , just Sub👍👍
Very nice and inspiring....
Very nice bhai.
ye box khain se milta ha batayay please please plaease
कितने मे मिल जाएगा
Kon si coding upload hogi Sir
Ozi by Nina ?
Awesome nice creation
Amazing 😀🤩😁😁❤️
Ottima procedura e manualita' GRAZIE PER IL VIDEO.
bro in your website you have three codes wich one i want to upload to my board
Mantap master ku konten ny
Donde consigues todos esos materiales
Very Nice and Beautiful
Superb bro
Thank you for this amazing idea!
I had a surplus box of these sticks that were lying uninspired until this!
I myself will be using a Wi-Fi RGB controller and a solar charging lead acid battery to power mine. I've not (yet) done any Arduino work other than with my laser etchers but programmability means the light pattern variations are endless! *Edit* Subscribed, Thumbs up and Bell clicked too!
ua-cam.com/video/YLfwbr-5PxM/v-deo.html
1
Good....👌
Thankyou 🙏
Bravo bravo bravo 👏 👏 👏
good idea sir
Is it possible to video tape the program ditails required to program this nano circuit and put it back in another video?
Ketne me milega
Superb Lamp👌👌👌
Where do you get your mini usb adapters with the pigtails? I cannot find them anywhere....would be nice to drill a hole then put that in!! Thank you!
Iski kit ka naam kya hai bhai
Sar kya aap no LED se banaa sakte hain
Hello Code and Diagram link dead pls new links Thank you
Супер майстер !
Прошу зніміть подробно відео по прошивці даного девайса , для новачків !!!
В оригінальній статті є 3 скетча для прошивки, який саме використовувати !!!
Дякую Вам дуже !!!
Nice idea sir
Can we use ardino uno board with same program that u have given ??
Can we make this without using the 10k pot?
Great job