I absolutely regret not subscribing to this channel! I wish him a long evolution so that we can enjoy more and more videos. I learned a lot about this channel!
@@easytechzones Yes, but I must connect the 3.5mm socket directly to pins A4 and A5 of the Arduino Nano (without bluetooth) and it is not necessary to change anything in the code?
that 10k resistor must be there or not? in the video a resistor is used but in the diagram the resistor is not shown ... and one more question: is the number of 20 leds required or is only 15 enough? they sent me the wrong order and instead of 30led / 0.5m they sent me 30led / 1m ... 😟 I've already tried to build, but it doesn't work for me. thank you for answer. ... i try change in code numbers of leds from 20 to 15 but whitout any effect 😟
Im curious on this , what is the color code on the resistor ? Is the push pin a NC or NO ? What program is used too put code in ? Also im wanting too build a 4-sided wood tower with 4 led strips
Do the lights dance even if the volume is too low - means; does this work in the back ground with without volume or does it dance only depending on the volume?
Nice video!! Is this gona work if i have a audio bluetooth module ? i mean the aux 3.5mm and the bluetooth is together on it and how i need to wire it up can you help a litle mate thanks !
Your project is very good, but when I copy the file on the Arduino it gives this error (Adafruit_NeoPixel.h: No such file or directory) how can I fix it.
Is it real ? I think it is fake because all the LEDs are connected in parallel , then how you can control them individually ? If I'm wrong please tell me.
why do you assemble the sides then drill the holes. better and easier to drill the holes neatly and in line then glue the side to the front. why not put the controls on the back as the look hideous on the side
water_torture.h: No such file or directory when I compile the code this is comming bro what is the problem bro plz ineed the project bro plz help me plz plz 😭😭
I absolutely regret not subscribing to this channel! I wish him a long evolution so that we can enjoy more and more videos. I learned a lot about this channel!
congratulations...from Colombia
Thankyou
Awesome diy electronics
Thanks
Excellent, Very good project.
if the system is connected with Bluetooth how can we listen the music/songs , i.e. only vu will display but no volume/songs can be heard...
Hi. Where can I find the micro USB socket white ??
Masha Allah super super
Many many thanks
Very cool! But I would like to do it without bluetooth, that is, connect directly to the speaker outputs; what would change in the code? thank you
Need only 3.5mm socket
@@easytechzones Yes, but I must connect the 3.5mm socket directly to pins A4 and A5 of the Arduino Nano (without bluetooth) and it is not necessary to change anything in the code?
@@easytechzones Do you think that if it is made with LED strip of 144 LEDs per meter it is better or not? (Using 20 LEDs too)
Nice video bro
Yaeh man !! I did it. It works perfectly
that 10k resistor must be there or not? in the video a resistor is used but in the diagram the resistor is not shown ...
and one more question:
is the number of 20 leds required or is only 15 enough? they sent me the wrong order and instead of 30led / 0.5m they sent me 30led / 1m ... 😟
I've already tried to build, but it doesn't work for me. thank you for answer.
... i try change in code numbers of leds from 20 to 15 but whitout any effect 😟
How can we learn connection with your RGB lighting videos you never tell about connection
Usta eline sağlık
Hello.
How much strips can i solder? Maybe to all "D" pins (D2-12)?
Please help.
Soooo you send directly the AC signal from the 3.5mm jack to the arduino pin. That thing does not like negative component...
Jesus the background music is so annoying in this video it makes me want to throttle its originator.
I don't know what is sunboard.
Can you give me the link where can buy?
Nice
muito bom, parabéns
Amazing...awesome...Edit: this leds is connected with 3 metal wires: + - and signal?
Yes
And 6:37 what is this red? -wire?
Super 😍😍
Thank you so much 😀
Im curious on this , what is the color code on the resistor ? Is the push pin a NC or NO ? What program is used too put code in ? Also im wanting too build a 4-sided wood tower with 4 led strips
Hello, what library are you using ... may I know which library you are using for the vu led rgb code ... thanks ...
Very nice bro
Thanks
@@easytechzones I want same
How can I get
Very nice 👌
Thanks
Welcome
Amazing idea bro 😍
I like it 👍
Thankyou
@@easytechzonesPlease add extra function: if music stop will show animation
Very nice
Awesome! Does it work if I shorten the LED strip?
Do the lights dance even if the volume is too low - means; does this work in the back ground with without volume or does it dance only depending on the volume?
Kalo beli arduinonya yg udah di isi coding tinggal rakit aja ada gak boss
this is mono or stereo?
Jack 3,5mm connect to output/input amplifier?
Stereo. Yes. 3.5mm for output
Hi, what the reference of your bluetooth ? HC05 or HC06 ... Or i can use what i want ?
Please EASY TECH, what is the maximum power that this vumeter supports? Thank very much.
I want to connect it to an old HI-FI equipment and not by bluethoo. The equipment is 100 watts of power.
Hello. Can I use RGB LED strip with 144 leds/m, or is this project specific to 20 LEDs each side?
What card board you use?
Nice video!! Is this gona work if i have a audio bluetooth module ? i mean the aux 3.5mm and the bluetooth is together on it and how i need to wire it up can you help a litle mate thanks !
Nice brother
nice!!
Just stumbled on to your channel…..BRILLIANT !!!!! Would you accept orders please ?
our website is roboman.in
can you change the name of the (any) bt receiver/transmitter?
Nice nice
Your project is very good, but when I copy the file on the Arduino it gives this error (Adafruit_NeoPixel.h: No such file or directory) how can I fix it.
5..55 in I wish you could show from where the wires come not just where they connect to. I so want to do this project thanks
The number of LEDs can be increased? If yes, what should be changed in the code? What is the maximum number of LEDs what this Arduino Nano can drive?
It can drive hundreds if not thousands
Awesome
قناتي المفضلة
How much did it cost you making each and every thing
Que buen trabajo .quiero uno así.jijij
I think it would be better if it was black
good!!
GOOD
Thanks
0:20 Why not just cut in the middle of the copper pads?
Ithinte oru contacting diagram ayachu tharoo componentsum
hello where i can purchase the BLuetooth RGB VU Meter .
is this with bloutooth vers 5, with atpx, no latency?
Is it real ? I think it is fake because all the LEDs are connected in parallel , then how you can control them individually ? If I'm wrong please tell me.
Yes, you are wrong
Because its ws2812b model led. Its work on single digital operation
You can search ws2812 led on internet
@@easytechzones but LEDs are connected in parallel then how they can Glow individually ? Please tell me.
Because each individual led has its own controller IC, notice the extra chip every led.
Do we need to download any laibary
Nice video
good pro, i like it
Thanks
Can you draw me a wiring diagram for this but instead of bluetooth I require a hack input. Thanks
Can use audio jack
Nc its working
Good
Thankyou
BAHAT AACHI HE MUJHE BANANAHE PATAS MILANEHI
how to add effect
3:50 whats the name music 🎶?
what version of arduino nano you use.
Bhi it is showing that this app can open its code not another please tell how to do
Can i use the rca output instead of bluetooth?
yes
sorry bro the code is error I want to make the vu meter can you update the code again bro ?? please answer bro..thanks
From where i can buy bluetooth module?
I need your help I want make four sound bar with ws2812b for pc and lights for my desk
you can use it
Hi, can I connect audio output directly to the analog input ie. Without bluetooth module?
yes
Without Arduino please
why do you assemble the sides then drill the holes. better and easier to drill the holes neatly and in line then glue the side to the front. why not put the controls on the back as the look hideous on the side
what is the code the link does not work?
Stereo?
Can we do this wish ESP8266
i noticed that your schematic doesnt have the 10k resistor on it. does that mater??
Sorry
Suspected delete 10k and negative connectivity . I will update on diagram
@@easytechzones it works great with it!
from where did you get the code
Check description
@@easytechzones I know code is in the description .
But i want to know how wrote it ?
water_torture.h: No such file or directory when I compile the code this is comming bro what is the problem bro plz ineed the project bro plz help me plz plz 😭😭
a LED lait kahapor milyga
Online milega
Ap kaha se ho
Bro the code is showing in my mobile in the Arduino droid app the code is showing error on the first line
What is the problem bro
Can any one help me to build aluminium profile led with a cheaper option?
Bhi listen I'm also from INDIA I try to open code in ide but it is not opening
Pl tell how I cam open please
What error showing?
Although thanks to reply but the thing is it is showing that other files cannot open in ide with red lights
Hola donde lo puedo comprar
Hi there can you please list the parts needed for this project .Thank you
Look in description. Drawing for project listed
Saya berminat dgn proyek ini dimana saya dpt membelinya????
From where i can buy those sun board ?
From glass shop.
I have 8884570727....
Code is showing compilation error
Hi all this project part available in pune maharashtra
Can i upload this code using arduino android app on mobile?
Where to buy this rbg led strip light????
hola se puede hacer pero con arduino uno?
How much cost brother
Burning holes in plastic using your good soldering iron is a BAD idea
Que fita é essa ?
Jak podłączyć bez modułu bluetooth tylko jack?