PSI How To: Which PCM should I use on my LS / LT Swap ( BONUS: PCM Reference Guide at end)

Поділитися
Вставка
  • Опубліковано 29 сер 2024
  • In this Video Matt from the PSI Team will quickly walk you through the process of identify which PCM to use for your LS / LT swap . Matt has lots of information that he would like to share with you to help with any swap. This will be one of many videos upcoming to help with you LS/LT Swaps, so you can "Wire it Up & Fire it up!"
    Don't forget you can always talk with a live person Monday to Friday 8am-6pm EST or email us 24/7 at customerservice@psiconversion.com
    To purchase a PCM:
    www.psiconvers...
    To Purchase a Harness:
    www.psiconvers...
    For all products sold please visit our site:
    www.psiconvers...
    For Instructions on how to remove the T43 6L80E TCM and send to PSI
    d9i5ve8f04qxt....
    "Music: www.bensound.com"

КОМЕНТАРІ • 16

  • @carllattimore8227
    @carllattimore8227 2 роки тому

    Cool! I will be sourcing from PCI soon!

  • @w41duvernay
    @w41duvernay 2 роки тому

    Any harnesses for 2008 LS4 engines? Trying to swap one into 88 fiero, with still using OEM getrag 5spd.

  • @larryprieto384
    @larryprieto384 3 роки тому

    All

  • @dominicd9840
    @dominicd9840 3 роки тому +1

    Can the E38 controller be used with a manual TR6060? I purchased a harness from you guys but am having trouble getting motor to start

    • @psiconversionyoutube
      @psiconversionyoutube  3 роки тому +1

      yes but the e38 must be tuned for a manual trans. I hope this helped you out.

    • @dominicd9840
      @dominicd9840 3 роки тому

      @@psiconversionyoutube okay could that be why I am getting a crank but no start? The tune? If so is that something you guys can do?

  • @animalspets5475
    @animalspets5475 3 роки тому +1

    Can I send in my Gen V, or should I get one from you?

    • @psiconversionyoutube
      @psiconversionyoutube  3 роки тому +1

      For Gen V controllers you can send it in or buy them from us for everything but 10 speed. For the Gen V 10 speed you have to provide the controllers.

  • @waltteripatronen4535
    @waltteripatronen4535 3 роки тому

    Can a t42 be used as a standalone controller when using some not GM aftermarket ecu? Ofcourse flashed to desired tranny (4l80e in my case) and wired properly.

    • @psiconversionyoutube
      @psiconversionyoutube  3 роки тому +1

      I talked with our tuner and as far as we have seem the aftermarket ecm and the t42 wont talk to each other, you can always ask the aftermarket company they might have a better answer for you.

  • @cowill8674
    @cowill8674 3 роки тому

    My gen4 was originally equipped with a 6l90. But im going with a 4l80e. Could I still use my same e38 ecu, with your harness, and add the t42.?

    • @psiconversionyoutube
      @psiconversionyoutube  3 роки тому +1

      no you would have to find a sent that have a 4L80 tune on them

    • @cowill8674
      @cowill8674 3 роки тому

      @@psiconversionyoutube i just will buy your complete kit 👍🏽

  • @anthonycha1941
    @anthonycha1941 2 роки тому

    Jennifer

  • @Jbone2737
    @Jbone2737 6 місяців тому

    🦾🙏🏽