Thank you for making the content that you do. I watch your videos with my daughters in hopes that they recognize that there aren't typical "female" roles/jobs and that if they wanted, they can do anything they want to in life. You are such an outgoing, fun, and uplifting personality and I hope my daughters can take a part of that into their lives as they grow older.
Baby steps! You have to start somewhere, but knowing when you need the help and actually asking for it, takes wisdom also! You pay attention and actually have an interest in what you are learning, a lot of people don't. Looking good!
The liberty is the only ride that resembles the old Xj to me. I love that you're building this up to be a mean machine. I've had thoughts of that myself at times but have way too much coin into my old 2000 XJ now even though it may not look like it lol. Can't wait to see this build finished. I think it will be awesome. Great job and good luck to you😊
Your kindness and positive energy is top shelf, Hollie. I love how you just keep on learning and doing and supporting others who might want to do the same.
Helpful tip on installing wheel studs. Use an air hammer to push them in from the backside. You'll fully seat them and won't risk stretching the threads.
Another little nugget for those knuckles, rotate the axle upside down. Since it's already out of the truck, you're not forced to lift the knuckle up. It just falls into place. Cheers, and good luck!
The fact you guys get this all done in such a short time compared to what I've got done on my own buggy (delivery to 🇨🇦 is snail mail), just amazes me and kills my motivation 😂 but liberty bibert 🗽 sure is coming together though can't wait to see it in action 🤟
I love this build. Glad to see something realistic compared to many of the crazy (but still cool) other builds in the competition. I'd love to bring my WJ on JK axles with 35s to Hurricane to wheel with you! Get some unibody wheeling in!
Been wheeling a Liberty CRD for years. That was my first build. I am going through her then she will go up for sale... The Liberty name is the Grimlen. I run 39 16.5 x 17s 241 or t case 513 gears She has 44 axles front and rear Ox lockers and she will clime....
pinion depth is written on the end of the new one. If you check and set the depth accurately the carrier only goes in once. Checking preload is more important.
You have any idea that putting an axle together, all the parts, fitting together, tightly, so the whole thing works? I have a 'vague' idea, and there is no way I could do what you are doing. I don't think. Maybe. On the other hand, you generate great confidence in a viewer that maybe, just maybe, rebuilding an axle and changing the gear ratio is possible. Maybe. Good Job!
I am getting parts together to build a pt cruiser.i have a 360 magnum motor and transmission and transfer case.and have ford Dana 44 front and Ford 9 inch.think should be a good overlanding build
One good thing my Dad trained me to do when taking things apart is to put the Hardware Back in its Hole ...you dont lose it..and if a long one goes in a certain hole..its in the right hole ..next time you go to put it back together...cuz 9 out of 10 times your not going to remember and saves you time with the trial and error....
I feel your pain with the hardware. It's so easy to misplace the small stuff when you have multiple projects overlapping. Don't worry, you will find it the second you get the new stuff! 🙄
Wait, did Milt just use torque specs for the D44A (cast aluminum center section, found on the WJ Grand Cherokee) rather than the M210/M220 JL spec? Should be 135 - 155 ft lbs, not 125. Might be worth it to check. It seems like that's what he's pointing to in the guide... 8:21
howdy Hollie, are you and Tara sisters? you two do look similar liberty bibberty BOO is progressing nicely. i remember a time when you were scared to death of even trying to weld, you sure have come a long way sense then well done!
Oh man…It’ll probably get one tons at some point. I still kinda want to put this on 39s, but these toothpick axles won’t like that (even with this awesome new full float D44 rear and all the awesome front axle upgrades).
@MischiefMakerTV and i don't want something negative to be the only thing i say so... my wife loves what you do because you don't sexualize what you do in any way and that is honestly the only channel on the internet that i can say that about. So keep doing what you do. You have my support in anything you do, even if i hate the liberty. 😉
Watching a master at work. That Man has forgotten more about vehicles than most of us will ever know!!
So true!
Holly you are a great inspiration to many diy who don’t have the skill level you have using normal garage tools to build custom off-road vehicles
Love the folks at Dixie4wheeldrive!!! Milt, Bryce, Tara, Jeremy, and the crew are standup peeps!!!
That older gentleman was the perfect guy for this job 😊
Hands on is the best way to learn things. Just like rock crawling 😊
Thank you for making the content that you do. I watch your videos with my daughters in hopes that they recognize that there aren't typical "female" roles/jobs and that if they wanted, they can do anything they want to in life. You are such an outgoing, fun, and uplifting personality and I hope my daughters can take a part of that into their lives as they grow older.
Excellent outlook on life, Brian . I'm willing to bet your daughters will be successful in their lives. Keep shining your light ✨️ ❤
Mushy moments with Hollie and Shelia, LOVE IT! 💙 can’t wait to see y’all at trail hero.
Ben from jk gear and gadgets is seriously one of my favorite UA-cam personalities. Seeing that he’s coming onboard with your project is super cool
Baby steps! You have to start somewhere, but knowing when you need the help and actually asking for it, takes wisdom also! You pay attention and actually have an interest in what you are learning, a lot of people don't. Looking good!
The liberty is the only ride that resembles the old Xj to me. I love that you're building this up to be a mean machine. I've had thoughts of that myself at times but have way too much coin into my old 2000 XJ now even though it may not look like it lol. Can't wait to see this build finished. I think it will be awesome. Great job and good luck to you😊
Awesome mooshie moment. Applies to something I'm doing now. Great timing!
Your kindness and positive energy is top shelf, Hollie. I love how you just keep on learning and doing and supporting others who might want to do the same.
You can tell this guy knows his stuff just by his demeanor and actions,experience is golden.
I love this channel. Hollie shows how much anyone can accomplish.
Helpful tip on installing wheel studs. Use an air hammer to push them in from the backside. You'll fully seat them and won't risk stretching the threads.
Gotta love Dixie’s axel stand😊
Sheila the destroyer is looking mint👌
Thanks for taking us on that regearing field trip Holly! That was rarely seen gem!
Another little nugget for those knuckles, rotate the axle upside down. Since it's already out of the truck, you're not forced to lift the knuckle up. It just falls into place. Cheers, and good luck!
With the front axle almost added, she is going to be one tough cookie.
Tom Tom
Exciting!! Shelia looks like a Real Jeep now!
The fact you guys get this all done in such a short time compared to what I've got done on my own buggy (delivery to 🇨🇦 is snail mail), just amazes me and kills my motivation 😂 but liberty bibert 🗽 sure is coming together though can't wait to see it in action 🤟
W O W ! ! ! This was one of the best videos I have seen you do. Thank you so much for your Celtic wisdom!
Took me half a day to put one together once 😂😂😂 now I can nailed it in 20 minutes
I love this build. Glad to see something realistic compared to many of the crazy (but still cool) other builds in the competition. I'd love to bring my WJ on JK axles with 35s to Hurricane to wheel with you! Get some unibody wheeling in!
You rock Holly !!
Thanks Holly.. I have a guess on your helper, Tomtom or Matt. Go girl. Walter rocks, keep up the good work.
Great job guys. Thank you 😊
You don’t have to apologize for bringing outside help, like you mentioned the others have workers or people to assist them as well
This is such a great build. Love the positive energy!
Love the mushy moment! Thank you for sharing.
THANKS FOR ANOTHER GREAT VIDEO
Been wheeling a Liberty CRD for years. That was my first build. I am going through her then she will go up for sale... The Liberty name is the Grimlen. I run 39 16.5 x 17s 241 or t case 513 gears She has 44 axles front and rear Ox lockers and she will clime....
All of us are so thankful to be called “ my lovelies”
pinion depth is written on the end of the new one. If you check and set the depth accurately the carrier only goes in once. Checking preload is more important.
Eggzacklee with the Mushie moments... we all learn bit by bit....
You have any idea that putting an axle together, all the parts, fitting together, tightly, so the whole thing works? I have a 'vague' idea, and there is no way I could do what you are doing. I don't think. Maybe. On the other hand, you generate great confidence in a viewer that maybe, just maybe, rebuilding an axle and changing the gear ratio is possible. Maybe. Good Job!
YaY 🎉 I'm number one to watch your video
😊🙌🏻
I am getting parts together to build a pt cruiser.i have a 360 magnum motor and transmission and transfer case.and have ford Dana 44 front and Ford 9 inch.think should be a good overlanding build
Rudy since Fergus was at his shop helping on the Mini now he owe's you one for borrowing your helper
One good thing my Dad trained me to do when taking things apart is to put the Hardware Back in its Hole ...you dont lose it..and if a long one goes in a certain hole..its in the right hole ..next time you go to put it back together...cuz 9 out of 10 times your not going to remember and saves you time with the trial and error....
Walter reminds me of this all the time. It’s definitely getting better, but lots of opportunity for mistakes on a big project like this 🤦🏻♀️
I feel your pain with the hardware. It's so easy to misplace the small stuff when you have multiple projects overlapping. Don't worry, you will find it the second you get the new stuff! 🙄
Good Video
great as always great content very entertaining
Wait, did Milt just use torque specs for the D44A (cast aluminum center section, found on the WJ Grand Cherokee) rather than the M210/M220 JL spec? Should be 135 - 155 ft lbs, not 125. Might be worth it to check.
It seems like that's what he's pointing to in the guide... 8:21
howdy Hollie, are you and Tara sisters? you two do look similar liberty bibberty BOO is progressing nicely. i remember a time when you were scared to death of even trying to weld, you sure have come a long way sense then well done!
Don’t say struggle bus. It’s whatever it takes to get the job done and you’re getting it done. Be proud Scottish Hammer!
Could you actually feel a difference in temperatures with the new insulation on the door?
Not sure who's in the running, but I'm guessing Chris. Kinda thinking Walter might be there too!!
So if I can snag a set of jk rubicons that’s already been regeared for 5:13 for $3000 then that’s a good deal?
Way to not letting missing hardware get ya down. Stuff seems to disappear when I don’t bag and label it
It’s killing me, Jesse! 😑
What brand axle shafts did you use in the front axle?
So is there any reason that bolt needs to be that short or is it a clearance issue.
5.53 gears?? Was that a whoopsie or is that true, usually it’s like 4.56 or 5.38
Milt of Milts mile?
Yes, the one and only
Yup. One and the same! And he is a great teacher…
@@MischiefMakerTV He’s scheduled to drop the motor in mine next week, and I’m super excited about that!!!
Don't be afraid. Somebody has done before and filmed it. You can find it on UA-cam! haha!
17:21 Robbie Layton… ridiculous!!! lol.
Hollie - quick idea - if you made the voting link easier to use would you get more votes? like those Rat guys ?
Project manager does not equal builder.
We all start somewhere my friend and a better project manager wouldn’t have misplaced hardware 🤣
Just gearing up to finish Liberty Biberty…… just sayin. 😂
Its too bad that those axles are being wasted on a liberty. I have always hated the liberty for replacing the XJ. 😢
Oh man…It’ll probably get one tons at some point. I still kinda want to put this on 39s, but these toothpick axles won’t like that (even with this awesome new full float D44 rear and all the awesome front axle upgrades).
@MischiefMakerTV As much as i love you, and nothing against you Holly, but i just can't make myself watch liberty content.
@@ProjectXJ I totally get it! I really struggle trying to watch wheeling content with new broncos 🤣. It just makes me sad…
@MischiefMakerTV and i don't want something negative to be the only thing i say so... my wife loves what you do because you don't sexualize what you do in any way and that is honestly the only channel on the internet that i can say that about. So keep doing what you do. You have my support in anything you do, even if i hate the liberty. 😉
And i know you probably don't hear that at all but thank you for being a roll model that my girls can look to.
I like you