How to Replace a Ball Joint (Ultimate how NOT to guide) | NISSAN QASHQAI (J10, NJ10)
Вставка
- Опубліковано 2 кві 2021
- If you found this video helpful then give it a thumbs up, consider subscribing to my channel and don’t forget to hit the bell icon so you don’t miss out on future videos.
Take care and I’ll se you in a bit!
My Favourite Tools:
Bahco 34pc Socket set:
UK amzn.to/35kcM3m
US amzn.to/2OYXldc
Bahco 104pc Socket set and spanners:
UK amzn.to/2nvrX8P
US amzn.to/3aFHgBF
Wera 6pc Screwdriver Set:
UK amzn.to/2AWGuxa
US amzn.to/3btAhLe
Teng Tools Torque Wrenches:
40-210 Nm 1/2" drive: UK amzn.to/35lKs0j
US amzn.to/2ZDM9EY
20-100 Nm 3/8" drive: UK amzn.to/35lKuVZ
US amzn.to/3qHhwKp
5-25 Nm 1/4" drive: UK amzn.to/33fv83G
US amzn.to/3sfRi2d
Support me on Patreon: / thegarageuk
You can also follow me on the socials:
Instagram: @nandorsgarage
Facebook: / nandorsgarage
DISCLAIMER:
This video is for information purposes only!
Methods described in this video may prove to be dangerous or illegal.
I do not make any warranties about the completeness, reliability and accuracy of this information.
Any action you take upon the information in this video is strictly at you own risk and I will not be liable for any losses and damages in connection with the information supplied in this video! - Авто та транспорт
Dude, this is one of the funniest repair videos I’ve watched on UA-cam. Thanks for helping me with the Qashqai LBJ and for making me laugh so much. Please keep making these vids. All the best.
Thank dude. Believe me I laughed as hard as you when I realised my disgusting stupid mistake:)) All the best
People like you sharing your time and knowledge are really generous. Thank you. I wish information like this had been so readily available in the 1980s when I started doing my own car maintenance, I spent so much time trying to match the Haynes manual descriptions to the parts of the car (which invariably didn't have my exact model) whilst freezing outdoors.
Once again, thanks.
Hilarious! Good humour and the reality of the shit we learn along the way. I thought you were going to piss on it!
I thought about that tbh, but UA-cam would’ve flagged it as inappropriate content :)) lol.
In hindsight I don’t know what was I thinking?!?! WD-40 and fire?! Idiot. Shit happens in life lol. So glad you enjoyed it. Thanks
Great video.
Knowledge and laughs. What it’s all about. 😂👏👏👏👏
Well done lad
nice video thx
Enjoyed watching. Very informative.
Thanks mate :)
This is so funny man 🤣🤣🤣. Love your honesty though 👏👏👏
Thanks dude:D
😂😂😂😂Brilliant video 👍👍
A vice and socket is a good way of pushing tye ball joint out
On a similar note, using the red straw, WD-40 also makes an excellent flamethrower.
Привет, очень полезное видео. Удачи.
Спасибо за просмотр!
Hahaha great just how I feel when things don't go right 👍
"...a couple of taps with the thumb detector." *hits with hammer*
:'D
😂 lol
Can't separate the ball joint from arm, no matter how big my hammer. Have just bought a ball joint press off Amazon. Suspicious your camera battery died before we could see the hammer successfully remove the old joint...
Nice work !
Did this job a week ago on my nissan x-Trail
I found out the easiest way was to take out the arm and press the ball joint in and out with a socket in a hydraulic press.
It took about five tons to get the old one out 🙂
Doing this on the GFs Pulsar today (same platform/parts mostly), both sides boots destroyed, circlips have completely disappeared and broke my tools... soaking in some plus gas while I wait for a replacement puller off Amazon. I hate cars.
haha f_ck-it-bucket lol :))
Indeed :))
Thumb detector lol
You cant seperate the ball joint , from the arm. Looks like you brought a new arm lol after the camera went off and back on again
Yes I did buy a new arm, the ball joint was riveted on to the old arm and I didn’t fancy cutting the rivets off. The complete arm wasn’t that much more expensive.