LIBERTY ENGINE 2.0 TEST - UNCUT VERSION
Вставка
- Опубліковано 23 бер 2023
- LIBERTY ENGINE 2.0 TEST - UNCUT VERSION
Our previous video has had a huge impact all over the world. Everybody wants to buy the "Liberty Engine 2.0" but unfortunately we can't sell our prototypes. But in this video we are going to launch the first long non-stop test of our perpetual power generator. This long version of the quiz was only available to our channel members and we decided to post it because our video reached "45,000 LIKES".
Please note that we cannot sell our prototypes, but we must warn you that we have detected several fraudulent companies that try to scam people by saying that they sell copies of our Liberty Engine, but those copies do not work. BE VERY CAREFUL NOT TO GET SCAMED
INDEX:
00:00:00 Introduction Nicola Tesla
00:25:10 Manufacturing link of the "Liberty Engine 2.0"
01:13:00 First full test of "Liberty Engine 2.0"
08:27:30 IT WORKS!
13:50:00 We disassemble the motor to check that there are no hidden batteries
19:53:00 BEWARE OF SCAMMERS
20:04:00 Acknowledgments
We want to thank all the members of our channel, but especially the Elite members:
-Gerd Sturm
- Jacek Wysmyk
-HarpinKeith
- I am the one
-James Eggers
-Mike Arshinkoff
THANK YOU!
__________________
Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
Become a member to enjoy many advantages!
💥 / @hiddentechnology_
Join us!
💥 Private Telegram channel: t.me/hiddenTechnology
💥 Facebook channel: / hiddentechnologyyt
HOW WE RECORD OUR VIDEOS
-Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- Cayer FP1450 Tripod: amzn.to/3C7gIWX
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
Business:
dakrazychannel@gmail.com - Наука та технологія
Друзья, добрый день. Меня зовут Павел. Я обращаюсь к российским зрителям этого канала. Судя по статистике ролик про изготовление безтопливного генератора Тип1 посмотрели уже 11 миллионов раз. И я думаю, что часть аудитории попробовала повторить данную установку. Может у кого-то даже получилось, а у кого-то нет. Но я уверен, что люди попробовали. И я попробовал тоже. Здесь я хочу поделиться результатами моих испытаний.
Теперь про генератор. Долго пытался найти генератор 24В на 200А, не получилось, искал среди б/у и ремонтных агрегатов. Нашёл генератор на 120А и дальше работал с ним. Спилил "зубья" на роторе аккуратно токарным станком, отлично получилось. Далее - ниодимовые магниты 20х20х10мм. Приклеил 12 магнитов к 12ти полюсам на роторе Полярность чередовал, как в видео, проверял её на компасе. Далее: опалубка из пластиковой бутылки и эпоксидная смола. Всё как в видео.
После заливки ротор был обработан на токарном станке для выравнивания цилиндрической поверхности. Важный нюанс: в моем исходном авто-генераторе у обмоток статора - не три, а 4 (Четыре) вывода обмоток. С помощью тестера определили "0" и "фазы". Далее собрали генератор и запустили на стенде. Слава богу есть специальный стенд для проверки автогенераторов на работоспособность, поэтому не пришлось покупать движок для испытаний и мастерить основу-подставку, как в ролике. Результаты испытаний: при скорости вращения генератора 3000 об/мин модернизированный генератор выдал напряжение переменное на выводе "ноль-фаза" - 25В; на выводе "фаза-фаза" - 40В. К расчётным 230В даже не приблизилось. И очень сильная вибрация, тяжелый стенд заметно вибрировал. Вот такие дела. Хочу посоветоваться с теми, кто уже проходил этот этап.
А также я хочу организовать сообщество людей (Человеков), которые хотят развивать безтопливные технологии на благо Человечества. Может слишком пафосно, но таков мой посыл, кому близко - отзовитесь).
И вообще, хочу вынести обсуждение данной проблематики на широкий простор. Я думаю, что уже хватит нам отсиживаться по своим "норам".. Пора объединяться! Все кому в душе отзовется мой призыв, добро пожаловать, пишите в личку или здесь в комментах. Я размещу это сообщение в комментариях к разным роликам на этом канале, надеюсь, что буду услышан. Всем добра! Павел.
Эх Пашка Пашка как думаешь как много может вместить корпус данного Эл мотора?))) Например, мотор поменьше с аккумулятором и схемой может? чтоб болванку аллюмиевую крутить)))
Thanking to your "Great" effort that you shared with humans. Amazing stuff.
If it were truly free energy:
1- It would be on all major media networks
2- The creator would be the announced next Nobel prize recipient
3- Oil prices would immediately drop significantly.
Not going to tell you what to believe, just throwing out some reality.
Wrong! The history shows, that the creator will be visited and get an offer or a request to stop any further efforts in this topic. Or something bad might happen to his family… Sometimes the creator will vanish without any traces… If you'll do some research, you'll understand.
@@johnwayne9103 If the creators had a legitimate working device, in the US, when they apply for a patent and demonstrate a working device, the government will claim national security and pay the creators a "fair market" value and they must sign a non disclosure. However, if the creators publish it on social media, the government cannot claim national security.
You can look up patents under national security and social media or public introduction and use.
I have theorized. That what you have done is possible. Even made a few small scale attempts myself. Needed some machining equipment. That I did not have or the expertise to metal work. You basically created a rotating magnetic field or switching fields. Very ingenious. Is not perpetual motion. Always knew magnets was stored energy, Just never could figure out how to convert to usable energy. Well done! Fellows.
Unfortunately, even magnets "wear out" over time, i.e. the magnetic field is depleted and becomes weaker
@@dgfgdsfds4128 After the energy is depleted from a magnet. It must be replaced. But since the scientific world. Will not except magnetism as a form of renewable energy. They scoff at any idea of using natural magnets for power generation. Calling it perpetual motion. When it is no different than petroleum products. Naturally produced by the earth itself. Just have to discover how to convert to a usable form of energy.
Of course, a magnet weakens over time, which type of magnet do you think stays the same?
@@bahodirjonabdullayev7011 None stay the same. Except an electro magnet. Which requires energy to maintain a magnetic field. Man made magnets last longer. Natural magnets are made by the magnetic field of the earth. But have a short life.
One of the excellent inventions
God bless this project
Well done.
This was the dream of mankiind
I would like to sell it to all possible in India. 😊
Yep, everyone wants energy at zero cost. Unfortunately not possible. Too bad thus guy is just scamming everyone for youtube clicks:)
Стараетесь спасти матушку Землю.Спасибо вам ребят.
You can see a cut on 9:00, the wheel is starting to slow down, but after the cut is spins fast again, so you spinned up the wheel again.
Good eyes. Nicely done.
exactly. thanks
Why are you people being assholes? They made a cool machine. It's a prototype I'm sure they will go bigger and better eventually. Well done!
The dramatic music makes it so believable too!
i didn't notice his hands jump to a completely different position after removing the batteries, at all.
Excelente Video Gracias por compartir
Gracias por tu apoyo
Grandioso complimenti
AWESOME
災害避難所や紛争避難所などの場所で活躍する事を願っています。
出来ることなら利益に走らず困っている方へ差し伸べる手であって欲しいです
Viel Erfolg von der Lichten Seite!
Tuyệt vời. cám ơn đã tiết kiệm đc: kính phí, thời gian. Sư phụ.
Where can I get a full circuit diagram of this? And why an Aluminium Silver alloy you have chosen for the rotor?
What is the round cylinder on the side that has wires coming back into the motor? Is that a powers source?
It would be useful to measure the voltage and current of the load from the generator in real time to see the actual impact of each of the connected devices. It is best to connect 2000W heaters (first one, then the second and third, etc.) and then see how they will impact the generator.
very good
Génial 😊😊😊
Everything that exist or has been invented, it's a part or a puzzle creation, and every part of it, should be enough to assemble in a different manner, in order to achieve a different result. This is my conclusion after observing creativity, all over the world. Remember this words. Thank you.
The Rotor is made of alluminium with a percentage of silver to help create the diamagnetic effect in the rotating magnetic field caused by the infused silver in the alluminium rotor..how much is mystery...balanced coring of the alluminium rotor to add silver could possible work...either all I'm a huge fan of this experiment it could potentially save the world...imagine this in a electric car
Yes may help the silver but the silver only react if the magnet move over and even if you do move the magnet over the silver just a tiny effect while you move the magnet. On the rotor the magnet stay in one place in the cure of alu and silver so no effect of the silver I believe
@@alexandersandor7315 I believe the build of this device using the pullstart to give enough momentum to power the motor to self power is correct and possible...the idea of using silver within the magnetic field I'm going to have to test that out for myself I have built one without the solid rotar but a design of my own
that looks like a pressure washer motor - how convenient it was already wound to your specification !
connect the output wires back into the coils around the magnets and watch it increase in revs until it flys apart
Сколько я не проверял но к сожалению не получается это сделать, да есть интересные вещи которые противоречат физике, но если у вас это работает то вы молодец.
رسم توضيح للملفات وتوصيل لاسلاك
@@waleedness7148 versteh leider kein Wort.
large hum from a big mains transformer under the bench and even buried underground later in the video, he does a lot of tests at that same place on the riverbank, obviously has mains there to run irrigation systems, but i do like the video. Not enough magnets and certainly not strong enough to do the work he shows. think about it and you will see its nothing more than a electric motor with the drive transformer under the bench, nothing more that the mains that there at the water side that drives the irrigation pump being used to drive the motor go mislead one to into thinking its running without any power input.
Question #1 why only 4 coils, if you made each coil core is big enough for 2 coils?
Question #2 if you really intended to only have 4 coils total, why not make the coil cores flush with the coil and closer to the magnetic wheel for a stranger magnetic effect?
Question #3 why is this version only single sided devise instead of a double sided devise?
Question #4 why aren't you using fuses to regulate the incoming flew before looping back into the motors power supply?
hello, thank you very much for sharing the Liberty Engine. Can you tell us in which mixing ratio you alloyed aluminum and silver and how big the radius of the rotor head is?
Hi I looking the same thing but aluminium shadow the magnetic field silver only react a bit once the field moves I don't see much reason for silver mix
ممتاز ❤❤❤❤❤❤❤
Смотрите внимательно, после 17 минут когда он снимает Кришну двигателя, кадр меняется , это не будет работать , он аккумуляторы вытаскивает из под Крышки , потом кадр продолжается, во вторых нельзя с двумя катушками микроволновки получить 220 вольт
@Václav Kapsář Напряжение там есть по 10вольт на катушке, но сила тока очень маленькое.На 17.18 и вправду кадр меняется.
To remove some of the doubt, solder the wires on to the bulb, lay it on the table and and don't hold it in your grip of your hand.
What's in the round cylinder that connects to the junction box at the top of the motor?
Kondensator
How many revolutions of the motor (rpm)?
Cuales son las caracteristicas del motor y que porcentage de plata y aluminio componen el rotor?
Very innovative and simple yet powerful and disruptive. How does the alloy material affect the magnetic field generated by the magnets and is it the same material as the cores inside the microwave transformer coils? Is it an aluminum alloy?
It's a silver infused aluminium rotor...silver cannot be magnetised but when placed into a rotating magnetic field it creates a diamagnetic affect
Hmmm.. Which type of inverter is hidden inside the capacitor, Take the capacitor out of the plastic case and show us what's inside by doing the test. And how do you stabilize Output Frequency and Voltage ???
Better if they install an rpm indicator, so we can see how the system rpm stabilizes with load changes. The rotor alone is heavy at 7.6kg, spins at 1400rpm. Notice at 8:24 when the starting string is pulled, it reaches some low rpm. Then the machine accelerates to 1400 rpm.
Them 10A cables didnt even smoke. Also, just as amazing, you conquered a hydrogen bike. Well, if you hit 100k subs at $5/mth, you'd be a million air in a few months....and then I'd be jealous
Здравствуйте "Кулибин"! Для лучшей устойчивости этой БТГ я бы добавил пару элементов. Продлил спереди ось, надел бы подшипник и наварил стойку. Две пластины, на которых держится двигатель, надо продлить и приварить к рамке. Хотя бы слева и справа. А теперь пару вопросов:
Сколько квт выдаст эта установка? Сможет 4-5 киловаттами поделиться?
Зачем лишнее железо из бывшего тороидального трансформатора? Не для лучшего ли поля тора? Или вы тем самым избавились от паразитического затухания электромагнитного импульса?
А теперь не по теме. Смотрели ли вы про генератор Серла?
@макс иванов я не пытался кого то оскорбить. Откуда мне знать из какой он страны. И не надо всех под одну гребёнку. Иначе посчитаю вас троллем.
В предыдущих видео он сообщал, что нагрузку может тянуть до 20 или 24 кВт, точно не помню. Но точно одно из двух.
@@FERRERO_Partisan спасибо!
Congratulations fom Japan 🇯🇵 🇧🇷
Congratulations for what, exactly? Nobody is using even one of these. Nobody is even trying to manufacture and sell them. If this was real, then there would be no shortage of entrepreneurs investing in the manufacture of such an incredible moneymaker.
nhạc té loa công xuất lớn những bộ dàn loa bát to quá chuẩn luôn
tôi áp dụng nhạc này vào những bộ âm ly loa được nang cấp mọi người mê ly luôn không chê được thể loại nhạc này
tôi cảm ơn ban nhạc người thực hiện phát trên cộng đồng mạng được mọi người yêu nhạc nghe thưởng thức
nhất là những người làm loa và những dàn âm ly thông dụng trong cộng đồng
Where i find blueprints with all used materials and size of all them. Thanks
SEGUO
Look up Howard Johnson he had a patent on a magnetic self running motor. Late 1970's ~ Early 1980's One of the hobbyists' magazines had a full article on his motor in 1981. Short time after the magazine was bought out. Poof it was gone.
Very coincidentally it puts out 228V regardless of the load conditions, never going up or down when loaded with the 3000 Watt heaters! Could it be that there is something else providing the 228V, maybe mains voltage?
Better if they install an rpm indicator, so we can see how the system rpm stabilizes with load changes. The rotor alone is heavy at 7.6kg, spins at 1400rpm. Notice at 8:24 when the starting string is pulled, it reaches some low rpm. Then the machine quickly accelerates to 1400 rpm.
Hello, dear. By watching this video and the previous video, the generator configuration video, I could not understand how I can link four files together. Please make a video about this thing.
Bonjour,
J’ai eu l’occasion de tester la configuration que vous présentez et je ne vois pas comment vous pouvez sortir plus de 25V sur une bobine?
Je pense que ce n’est pas possible d’avoir 220v et encore moins la puissance !
Si vous voulez bien me démontrer le contraire j’en serai ravi!
Merci à vous.
Nicolas.
Good day, great power unit. May i ask for the specs of the liberty 2 power unit ? I woulx like to build it, i dtay on a farm, no power at all. This will change my life at least, please.
Can the alloy of the rotor share the silver and aluminum mix ratio
I'll do another presentation to trust you
I want to build one could you help me please do I really need aluminium and silver fix of material for the rotor or aluminium would be ok as well?
Ciao per favore mi puoi dare il link dove hai acquistato i magneti n52 grazie
The generator made by Hidden Technology is transparent, of course, I will make it too, it will be effective, thank you.
By any chance would you be interested in working with an entrepreneur to use this technology in an electric vehicle
Dear viewers, how else can you be convinced? Everything is transparent. 👍
Why you dont put on an Oszilloskop instead of an normal Multimeter?
I would like to buy something like this if possible, and what is the price. Thank you.
People say it's impossible without any attempt
That system is a fully capable technology, as we see in this video
Hello !
@Hidden Technology ,
During the broadcast, you wrote about the alloy of Aluminum and Silver for the ROTOR ... But after all, Aluminum and Silver are non-magnetic materials, aren't they? No ?
It is about eddy currents.
Questa invenzione cambierebbe la vita al 90% della popolazione della terra . Il 10% che detiene ricchezze immense, se l'invenzione fosse vera, avrebbe gia provveduto ad individuare da chi e da dove sono partiti questi video
what is the load capability?
I would like to know where they got the metal for the flywheel? I am a gearhead with my own garage and workshop. I have my own spinning lathe which I can build one… I just want to know if the aluminum silver metal was something that they melted together themselves, or did they buy it from someplace? I’d really like to try and put this design to the test and see if it really works! If it does, I will gladly like and support your video and advocate your work!
Alu und Silber Legierung.
Ich würde Aluplatten zu runden Scheiben zuschneiden.
Die Scheiben an einander Verschrauben und die Magnete in den Aussparungen
in den Platten verklemmmen.
its a silver aluminum material made that flywheel and places with neodyme magnets in it
@@augustuscaesarabarquez270 i know what is on it, I just want to know how to get the materials to build it myself!
@@gt2699 It is shown in previous videos how he created it. However im not sure about the ratio of silver and aluminum.
@@benq994 and once again, I’m not asking about how he “created” the metal flywheel… I’m asking if and where he “purchased” the metal for the flywheel! I want to know where he got the materials so I can experiment with it! I saw perfectly well, how he was using his machinery to create the flywheel, but I want to know where he got the silver/aluminum material to make the flywheel!
are you the official channel for the liberty engine, or you are just distributing the video ?
What is the cylinder shaped item that remains unopened on the side of the box he opened on top of the electric motor? It looks like a battery to me.
capacitor :-)
@@dgfgdsfds4128 ok thx. I was thinking that might be a possibility.
I think you hid the batteries in those transformer/ magnet looking things.. and I saw you disconnect a lead of some sort, was that supplying the battery power to the motor/alternator?
Scusate ma ho una domanda. Si vede che viene collegata una sola bobina, quella superiore, e le altre 3? sono una decorazione? Si vede chiaramente che non sono collegate tra di loro ne in serie o anche in parallelo. Spiace è un bel lavoro
Chiaro,semplice 2 fili nero va bobina sotto come una caricatore wireless sotto banco, poi blu rosso va motore. È solo un video per avere click
I want to see how they are controlling the hertz frequencies.
Why ? Goal of this Engine is power as i see it... controllers are another step
You can DESIGN with self motion....
pero esos motores usan capacitor de arranque y no se lo veu por ningun lado explicame.
Por que não levanta o aparelho para provar qye não tem nada ligado por baixo?
Altenator volt ampere ,how much? Power generator...watt?
Have Been waiting over a month
You are honest. I did this experiment, and a voltage of 110 volts was taken out, and a 1800-cycle drill was powered by it, and a 3000-cycle drill was connected to me, and a voltage of 154 volts was output.... For this I ask you for the operational board of the motor, please.
You claim to have made one, talk to me I have 10 grand us for you:)
@@KevinSmith-os5yz And, alas - _CRICKETS!!!_
(It's all BS - unfortunately.)
(Because I'll raise you 10K if it's true)
💯💯💯👍👍👍❤️❤️❤️
Ok so how can I purchase a dozen or so?
How would you regulate speed and horsepower
increase the number of magnets and put more step-up transformers.
Better if they install an rpm indicator, so we can see how the system rpm stabilizes with load changes. The rotor alone is heavy at 7.6kg, spins at 1400rpm. Notice at 8:24 when the starting string is pulled, it reaches some low rpm. Then the machine accelerates to 1400 rpm.
Great. ...Except for one thing: Nobody has it for sale. Anywhere. That doesn't make sense. If this was real, then lots of very competent people (including Hidden Technology) would already be raking in millions by selling it. In fact, there are contractors in China that specialize in manufacturing inventions like this. Just hand them the parts list, schematics, blueprints, etc, and they will make as many as you want. But for some inexplicable reason, nobody (including Hidden Technology) wants to manufacture and sell this ticket to becoming a billionaire practically overnight. Hmmm...lol
ONLY problem history has made inventions like this fatal for inventors, they turn over plans and the plans disappear, sometimes along with the inventors. They have to be careful who they deal with
Because its free
Wait for the end of earthly cataclysms and the destruction of modern infrastructure from mid-August to the end of October 2023. In 2024, the survivors will receive these inventions.
@@user-bm4cp4mt5t tis a bit early, 2040 is more likely for that (phoenix event)
Me gustaría tener uno de esos, cuánto costaría hacerlo?
I need to have one.. but I didn't find the way how to have it
I expressed 100% of your video, but the voltage generated is not coming out
The motors are 1400 rpm, 1800 rpm, 2800 rpm, and 3000 rpm, but they are about 15V.
If the way you make it tastes good, you're lying
Sarei interessato a provarne uno di questi generatori. Come si fa ad avere?
YARI N NMN TO KY JUAN DELASAG, HEHE😂😂😂😂
I'm very sorry, but shouldn't the coils be as close as possible to the rotor magnets
Yes, it should be, but as far as I can tell, it's close enough.
The motor is DC or AC?
How do you control wear n tear
You can't. But A/C motors are VERY robust and will last thousands of hours.
How can I buy one?
Bonjour est il possible de connaître les caractéristiques du moteur ainsi que le diamètre extérieur du rotor?j aimerais me fabriquer un modèle identique pour mon usage personnel.merci bonne journée.
La chose la plus importante est la composition de l'alliage du rotor, mais nous ne pouvons pas dire cette information. Le moteur est 3/4Hp et 1400RPM
@@HiddenTechnology_ You can cleave an aluminum block because of its poor magnetic effect.
Aucun test de puissance fournie. Et c'est ça le plus important !
hello, my friend of Hidden technology, can you tell me in detail about your motor, how many klv and how many watts, if it's not a secret, I'll wait for your answer.
The whole thing is nothing but click bait for the gullible. It can't and doesn't work.
Pero si real mente funciona a mi si me interesa.
Tra due inquadrature identiche alle volte c'è un salto temporale questo vi consente di levare i cavi che entrano da sotto. Io vorrei che la vostra invenzione funzionasse ma qualcosa non mi convince. Provate a sollevare il motore mentre è in funzione. Grazie
Please share 100% to all subscribers so that we can trust them.
From one to ten.
What I would like to see is make generator that can put out 440 volts to run everything in the whole house.
Where can i get it how ist the Prize
Bad move 👍🏽👍🏽👍🏽
Soon we will release another video. There will also be a longer version for members
Hi brother. I want to buy. How much.
I'd love to know and understand more do you have a website and contact details
Which is the torque of this engine?
Zero, same as the power output.
Eu vejo que é um dimel gigante gira em alta gera energia
Why you give not buying or free plans? i need one im thinking only click bait here.
"No sé si este motor funcione realmente, pero para disipar cualquier duda, deberían hacerlo todo transparente, desde el chasis que han construido de hierro hasta envolver los cables con cinta adhesiva. Solo así serán creídos al 100%."
"Sí, han entendido bien: ¡también tendrán que pelar los cables eléctricos del plástico protector aislante y envolverlos con cinta adhesiva transparente! ¡Este es el desafío final!"
Por supuesto, todo lo que pueda ser reemplazado debe ser sustituido, como las cubiertas y tapas. No espero que se puedan sustituir los imanes y/o cualquier parte en general que sea necesaria para que el motor funcione correctamente.
I would like to know how long it takes for you guys to figure out that an electric motor is NOT an engine and vice versa!!!
Интересно этот аппарат вырабатывает модифицированный синус частоты по току или чистый синус, такой чувство, что тут какой то подвох
This device generates a modified sinusoidal current or a pure sinusoidal current, it seems that there is some kind of catch
Да он вырабатывает чистый синус прямиком из розетки
can i buy it?
OK MI HAI CONVINTO. COME POSSO AVERNE UNO?
Was anybody able to build this at home and verify it works? Thx
I can confirm that it works. You just gotta dream hard enough 😊