TESLA BASED ENGINE - UNCUT TEST EDITION
Вставка
- Опубліковано 23 бер 2023
- TESLA BASED ENGINE - UNCUT TEST EDITION
Our previous video has had a huge impact all over the world. Everybody wants to buy the "Liberty Engine 2.0" but unfortunately we can't sell our prototypes. But in this video we are going to launch the first long non-stop test of our perpetual power generator. This long version of the quiz was only available to our channel members and we decided to post it because our video reached great interest
Please note that we cannot sell our prototypes, but we must warn you that we have detected several fraudulent companies that try to scam people by saying that they sell copies of our Liberty Engine, but those copies do not work. BE VERY CAREFUL NOT TO GET SCAMED
INDEX:
00:00:00 Introduction Nicola Tesla
00:25:10 Manufacturing link of the "Liberty Engine 2.0"
01:13:00 First full test of "Liberty Engine 2.0"
08:27:30 IT WORKS!
13:50:00 We disassemble the motor to check that there are no hidden batteries
19:53:00 BEWARE OF SCAMMERS
20:04:00 Acknowledgments
We want to thank all the members of our channel, but especially the Elite members:
- John Hughes
THANK YOU!
__________________
TURN ON SUBTITLES. THEY ARE TRANSLATED INTO SEVERAL LANGUAGES
-----------
- If you want to see the raw edit of the engine tests, you can watch this video (Members Only)
• Liberty Engine 2 - Lon...
- - To become a member of the channel click the following link:
/ @thelibertyengineproje...
----------------
Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
HOW WE RECORD OUR VIDEOS
-Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- Cayer FP1450 Tripod: amzn.to/3C7gIWX
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9 - Наука та технологія
no change in motor rpm when light bulb is connected very good lol
The operator must test the generator by placing it on a transparent glass table with a view of the floor. If it still works I'd trust it.
I Loved this TEST!
Espectacular,no pensé que hubiera un canal que haga esto.
Perpetual motion (AKA free energy) is very real. The motion of planets in the universe have maintained their motion for billions of years. I've never heard of their energy running low or their batteries need changing, dispite running with clockwork precise motion for billions of years.
Seems you don't know much about the stars then because they aren't infinite our solar system works just like any other machine powered by a gas engine it will run out of fuel eventually
Consideraste hay vacío que evita el roce parte de la energía que se pierde en un sistema rotativo
Pequeña diferencia a proyectos en la tierra
I wish we all had free energy devices in our homes.
great job. great job. i will have to see this.
I'm just waiting the price to use at home as main source of energy for the next years. That's all. Thank you guys and congrats for this amazing project!
Автор умышленно не сказал про сплава. Есть стандартный сплав Алюминий-серебряный. Марка AlAg10 - на одну часть серебра - 10 частей алюминий.
Можно и самому сделать сплав. Сначала плавим алюминий, ровно 10 частей, как только алюминий расплавиться полностью - добавляем 1 часть серебра. И по возможности плавно мешать, чтобы получить однородную смесь сплава. После этого, аккуратно сливаем в заранее опок для отливки этого сплава. А там уже идет остывание и обработка на токарном станке.
How did this alloy come to be? For what purpose was it made and are there any videos of this alloy?
If this is true, you will need a security team. The love of money is truly the root of all evil. Tesla tower destroyed, titanic sunk.
I am going to bet you $1000 we will NEVER see this released to the public for sale, not even by this channel. Making unverifiable free energy devices and posting videos is a profitable niche, and you can do it over and over again forever, for years.
Verify by making one yourself, if it works make it for people u like, it will take over, hydrogen is easy to do yourself, this takes more knowledge and skills
Es wäre DIE Lösung ALLER ElektroenergieProbleme!!! 😊
@@mememan2344 pois é, realmente isso é uma farsa das mais baratas que já vi na internet.
Zgniecie
I have already started building a copy of the prototype. Three weeks and I'll post. Welcome from Hungary!
waiting on your channel
CONGRATULATIONS !! Thank YOU
Thank you!!!
Can the rotor be made with other materials, I don't know physics but maybe plastic or something else that has a big mass if that is necessary?
IS THAT THE START OF THE END OF ELECTRIC COMPANIES? I HOPE YES.
nope its impossible. Who will ensure or supply continuity? I hope Electric&Energy Companies and Corporations
Humans are to greedy they won't let this happen.
Multi billion start locate this blogger, either pay him and stop what they build it
I explain to you am power lineman,power generation in intire world so many way, always start the small amount of voltage,from 13kv to become five hundred kv,then supply to consumer step down by transformer to different place,with positive and negative force did you think this is impossible.intire world working in +and negative or south and north magnetic force.
@@awesomejob4209 it doesn’t work this is a Con because the laws of physics wouldn’t allow for this pseudo science to work. You’re just another person who’s fallen for the age old snake oil salesman.
As for this one, it will work when an external force is applied to it like when converted to wind or hydro energy. Max energy you can get from it with this type of build when using hydropower is about 2kw. or 2.5kw if properly designed, making the magnets close to the coil, will generate more energy.
Wow I love it ✊🏼
LOL 230V like from the mains socket, to learn more you just have to become a patron 😂
Even Nikola Tesla knew and could not circumvent the laws of thermodynamics.
Maravilloso, Maravilloso increíble, mucho de hacer y pocos, saben
Oooh my God..this is awsome
Hi!
What alloy is the rotor made of? What percent is silver and what percent is aluminum? How much does the structure cost? Can it be purchased?
Will be a great idea to post the material list and procedures for free that way it will be guaranteed that can be mass-copied and nobody disappears when something good hits the market ...so many inventors disappeared after their projects went public and no information was given and all records went into thin air.
Merci beaucoup de nous avoir exposer votre projet,nous aidant a faciliter notre vie quotidienne.merci beaucoup et infiniment.
This needs to be released to all of us so we can build them and give them to people...power to the people of earth...free energy...this will boost humanity....
Why should such fakes be released to the people? Only very gullible people without competence in physics can believe that this really works.
Tesla valóban fantaztikus elme volt akit már később majdnemcsak űldöztek, a találmányai miatt. Ha ez valóban megvalósítható és nem kamu akkor tessék mihamarabb a licencjogi dolgokat rendezni, tömegével gyártani, hogy mihamarabb eljosson egy átlagember otthonába is. Hiszen mindenki tudja hogy hogy Telsla-nak pontosan ez volt az életfilozófiája. 🤘🤘🤘
The rotor is a shell of prefamulated amulite containing a turbo encabulator and reciprocating dingle arms driven by a sinusoidal waneshaft.
😅😅😅good one
Wow amayand great work....I love it
very good !
Any thoughts about to upscale this with a 3 phase 380v engine?
At 1:32 & 1:39 I see what appears to be an induction coil. That and the careful placement of this apparatus on the table raises my suspicion that this "geberator" is being powered by a hidden induction source under the table.
Too bad you can’t share us the rotor’s alloy composition, I was so excited, maybe you will in the future!
thx for this video and how much energy does the generator generate under load?👌
Если подобные изобретения будут применены к транспортным средствам для получения электрической энергии, мы сможем путешествовать по миру бесплатно.
If u are stupid anof to belive in scamers
Подобные "изобретения" рассчитаны на технически безграмотных и доверчивых людей, чтобы на них заработать деньжат.
Congratulations !
I 'ld like sugest you put this motor runing inside a tranparent and closed box , and put this box inside the boat floating on watter by hours using a thermal camera screen 1 and normal camera scren 2 . A normal camera under water screen 3 .
Using a resistive charges like heater on limite of generator capacity and do 3 hours of cutless live in all angles in speed camera . Would be interesting we can observe the thermal variation of all parts of the mouter . The resistive charge on limite of power generating will show us there is no hidden wire . This one get heater and be visible on thermal camera .
liberty engine project, what model and serial # motor are you using, as it says on the nameplate on the motor?
Sem cortes né? 12:56 exatamente no momento que "desliga" basta olhar a luz refletida na bancada...
SUPER IDEA .
Cuanto es la mezcla de plata y aluminio para la fundición?
Question; there are only four coils on the motor which is supposed to have enough power to drive a 20kw gen, is it going to produce enough current with just 4 coils? Compare that to a 25hp electric motor, it would have at least 10 times the coils to produce enough current to turn a 20kw gen. What am I missing here? Okay, say its 30% more efficient then you need 30% less coils, but is there enough still for powering a 20kw generator?
that is the magic of tesla tech. It blows what we are taught as pinnacle in sceince and tech, and says you liars, I made machines 1000x better 100 years ago. The suppression of the math physics and knowhow is delibrite. Anyone who dreams otherwise is childish and ignorant. Why else do you think he can't just release all his info of his creation. People paid by govt and huge companies will stalk and terrorize this man and do everything they can do debunk him. Clearly this guy knows whats up in terms of potential attacks. Covering all body skin so no scars or moles can be analyzed. If they get his address they could easily sned a virus to erase all his data on his pc, setting him back god knows how far. If he ends committing suicide in the next 6 months due to depressioon or some story, we will know that its murder.
the light bulb should flicker since you did not integrate a voltage regulator, thus putting load on that engine should slow down the rpm of the engine.
Eso es Con el Principio de magnetismo, cuantos imanes de neodimio usaste y de que tamaño
Hello mr inventor, and are the batteries inside the square tubes?
This type of technology has been made a few times now but it normally is kept secret by the inventors, they are then bought out, or bumped off.
This technology needs to be put out for everyone to see like this so it will be seen by everyone and it won’t be kept secret anymore.
If earths magnetism is stolen and turned into heat the earth will lose its protection and become like mars
For all the people they think these runs buy battery inside that is no batteries inside the guy's not lying and he doesn't have no batteries inside to run this machine that he made this is done by project by my great-grandfather Nikolas Tesla so this guy what he's making here is not lying
nikola tesla had no children and died alone in motel...
i don't know what your on but it must be good lol he had no kids lmfao
You have a good and grate idea to save some power or energy cause we need that for our mother earth
Hola buenos días, cuánto tiempo a estado en marcha el prototipo? Que amperaje obtienen? Temperatura de las bobinas? Si es elevada estaría bueno colocarle unos ventiladores con disipador para evitar el recalentamiento, de que material esta hecho el núcleo del rotor?
Ok, the big question is now, what are you doing with this? Will it be sold? Mass produced? Or do you keep it for yourself? Will it be OpenSource? In case of selling, how much will be the price?
It’s a prototype, plan of action isn’t even in the works yet
It will never be for sale.
Question, why does he show a volt meter when what we really need to know is the amps?
Your fan works great!................
Now for the final TEST. Hook one end to a Dynamometer or is that in a future video
Why didn't you lift it up while the device was working?
Или лампочку слабую для показа начала генерации.😮
IT IS BEGINING. FREE ENERGY MAGNETIC GENERATOR!!!
سوف تكون ثوره في عالم الطاقه
설계나 디자인 특허 등록한뒤 양산형 모델이 나오면 구입하고 싶네요.
It's beautiful
next week I'll be showing you how to turn lead into gold, all for the small fee of a youtube membership
HaHa I bet this guy has got a bunch of snake oil
Building my own version as well. 6 days from completing in
upload your project when done,
Did you follow instructions or are you doin it by yourself? Looking forward for it!💪
Asumiendo que es posible, cual sería la diferencia si utilizo las bobinas de un sistema que aprovecha el movimiento generado por el viento y lo retroalimento con ese motor para reemplazar la energía mecánica del viento? Solo pregunto.
very good
Wouldn’t it be possible to short-circuit the coils at opposite poles of the rotor of the installation? The upper and lower coils clearly have different poles, and the left and right coils are generally made for the sake of appearance. It seems that this whole installation is just a dummy. If the north and south poles are connected in parallel, then there will definitely be a short circuit and the motor will stall and will not spin. Or is the video intended for those who do not know how asynchronous motors work?
No no my friend! If you pay more attention you ll note the magnets of the rotor is configured N , S, N, S.
Then , when the magnet N be in upper coil this one be oposite N to reppel the magnet . The same is to the S pole ! When this be on the lateraly coil this one will be S trying to repell it .
Therefore the configuration is below :
coil1
mN
C4 = mS mS= c2
mN
C3
Group 1 (Coil 1 in serie with coil 3 ).
Group 2 (Coil 4 in série with coil 2 ).
Serie / paralel :
Group 1 in paralel with group 2
Group 1 in serie with group 2 .
All depends the input and frequency mouter you can regulate the output coils according to this settings .
If you note the short circuit output , is easy to solve this problem . Just invert the output polarityes from ( - ++ -) to
(- + - +) as we do with batteries.
@@gato-de-schroringer for someone who claims to know slot about this stuff you should know how this is working. First off it is powered by 220v ac at 50hz. He hooked both coils, and motor together. The bottom coil is being powered by a coil under the table. That in turn powers the top coil and the electric motor. The electric motor is probably doing 90% of the work to turn. How did you not know that?
@@savemars4383 negative ! You can't say nothig about frequency . You can' t presume the frequency is 60HZ ( you meant) only becouse you did read 228 v AC .
The secret is you sicronize the generator output frequency with tbe mouter input frequency AC .
How bouth of it is copled by same axle then you may presume easily the mouter and generator RPM are the same .
The generator at X RPM must to produce the same voltage required by mouter at same X RPM .
If the RPM of mouter had lower or higher value of that of the generator , the sistem would not be sincronized and the poleys must be instaled and dimensioned to correct diameter for that mouter receives 228 v AC and generator produces 228 v AC .
Just the wattage or power of generator must be higher than mouter .
@@gato-de-schroringer Something tells me that this device will not work in real life and the north pole will never work with the south pole, they will repel each other and cause a short circuit in the system.
Świstak siedzi i zawija te sreberka, a Tesl w grobie sie obraca 😜
I'm sorry for Tesla, God bless his soul. LMAO
Yes I know what you think but it is still electric through magnetic flux but I meant direct magnetic flux coupling management
nice Movie FX. the motor get slower and slower. but a little error in picture , again over again XD XD XD XD XD
When you connect the bottom coil with the top coil why do I hear relays click? 4:03-4:09-4:15
That means there's a permanent power source somewhere
@@mikevincent6332 yup probably in that cylinder thing attached to the box on the motor
I think its the cable ties noise
@@JamesT65 there weren't any cable ties yet. A relay has a very distinct sound.
Just so we all have an idea of cost. How much did the rotor materials cost? That would be a nice place for all of us to start or stop. This is a question that needs to be addressed.
You could say how much it cost per material like. Aluminum cost was $, Silver cost was $, other additives cost was $, etc. That can be done without any patent infringement, I know it, you know it, and your attorney knows it. Since the price of these things fluctuate so much there is no way you could be infringing upon a patent unless it said you can not mix silver and aluminum. If you really want to help the world. Or you could actually give us patent numbers to see what we could be infringing on for our own safety.
It Al depends in your country like mine is totally different I spent about 800 to construct mine
My main question, is could you make the rotor out of hard wood or heavy plastic? This would also not have any eddy currents I beleive?
My thoughts exactly. Especially with the use of a 3d printer
u are next generation bro
En mi opinión, veo muchos expertos y criticones en los comentarios,. Que no funciona, que las leyes que no se que.. que esto. Que lo otro.. lo unico que digo eso... Tome de referencia el marica video, y hagalo tsl cual a ver si funcioan,. Y listo dejen de criticar, algo que nisiquiera ahn probado, y al creador de esta belleza pana, le soy sincero excelente producción. Un aparto hermoso. Y unico
Can see cuts in video when meter is attached lol
How many turns each transformer has, and what is the diameter of the copper cable used of each?
make sure that you work together that such things do not stand out and you had only just started and by that I mean the electrical wire that is pulled taut without pulling on the other side 2.40 / 2.45
what is the purpose of coil from left and right side if it not also connected from the motor? so the coil from up and down side only should be connected? please i want to know why. and also can we see the details of the motor too
Yes, two coils are disabled, why? I want Make one
2 coils for motor 2 coil to generate power - yet with so few magnets I don't think it would work as it is displayed for real strong power generation.
All of the physicists will start up with their second law of Thermodynamics. (according to our pet law this is impossible thing) So then the question is "where does the energy come from"? There are also "magnetism" and "gravity", both of which exhibit the properties of "forces". Then there is the law about if a constant force is applied to a mass (great enough to overcome resistance to motion) it will cause the mass to move as long as the force is applied. These forces are usually linear and sooner or later the mass will come against an object that stops it from moving. So then there has to be found a way to convert the linear motion to rotational or pendulum motion. So if this is a way to extract energy from rotating "magnetic forces", and convert it to electricity, then use the electricity to rotate a motor that rotates the magnets to generate more electricity, the converting force to motion concept is plausible. But if the "energy" actually does come (extracted) from the magnets then how long will the magnets last before they are depleted???
Neodymium lasts 100 years.
@@off6848 I think you are missing the point. The device as advertised seems to be producing energy out of thin air. Scientists with their laws say that is not possible. Which would then imply that the energy is coming from within the device itself. (the magnets) So saying that magnets last 100 years in a state of equilibrium does not address the issue. If this engine runs at the stated output of 20KW for 100 years, have you any idea how much energy output that is??? If the energy is actually being supplied by the magnets, the implied "energy density" for the magnet mass is off the scale. (if they last 100 years)
@@bigpicture3 all charge and energy is caused by electro potential of the dielectric and magneto kinetic force the universe acts as a big pump you say out of “thin air” but literally that’s how all magnets produce charge by causing pressure mediations and flux that then charges the air around the assembly called a field. In fact the thinner the air is the more electro static potential which is why you can send a balloon with electrodes and circuit into the air and draw voltage.
If the fields are being pulsed back and forth swapping charge and discharge between the transformers then this doesn’t have to break any laws of thermodynamics as long as the air and environment stays cool and constant
It's rotor have secret, it's rotor contains neudanium magnet inside the aluminium rotor, and those magnets feild is runing by Ed current which generated whenever aluminium rotor rotating, it's make high frequency energy in coils
اچھی کار کردگی ہے ایسا ہوسکتا ہے. ممکن ہے. بہت خوب
yo creo que si compras un generador a nafta que ya viene preparado para dar energía y lo auto alimentas sin tener que utizar el motor a nafta es mas fácil igual seria bueno que conectaran una luz y ver cuanto tiempo se mantiene prendida sin que pierda tensión ni se queme el motor
Ask yourself why we never see his engine placed on a support that would let us see underneath.
He would just have to lift it during his tests to prove it works.
If his prototype was so efficient and revolutionary, he would not be making youtube videos, he would at least be a millionaire.
You can only get out of a system the energy you put into it, it's physical!
Lets wait for the Liberty guy to post his suspended air demo for POC
@@firozkamarudin No need to wait, it won't happen.
His test at the water's edge, there is a clear area at 1m from where he puts his generator.
And he puts it in the middle of the grass and heaps of dead leaves.
However, the day he does it, I will come back and apologize for having questioned his words.
But an extraordinary claim requires extraordinary proof!
@@damienmalet1250 Air and Ether are mediums that carry charge. What you "put in" isn't just from a DC or kinetic source its all around us.
@@off6848 yes but to take something out, there's no other solution that to put something in.
If the one of the endless energy engine can give just 1% more that the ernergy we put inside, it will be better than ITER and all fusion experience!
@@damienmalet1250 Well it depends on time scales yes energy "loss" or rather relocation will always occur but think of a battery you take energy from somewhere and put it into the battery and it loses voltage over time but very slowly, slow enough that we consider them useful.
If this generator can efficiently cycle energy in and out without slowing down for say 1-2hrs at least it would be useful enough.
and that should be possible without manifesting that extra 1% out of thin nothing which is indeed impossible.
WHAT CONDENSOR ARE YOU USEING FOR STARTING TORQUE.
He uses 4 x primary coils from the microwave transformer he removes the ht coils from the secondaty 12x n53 type nimdium magnets North North Pole South South 3 x magnets slotted in side the routor edge
Que curioso jjj , yo tuve la misma idea el año pasado y resulta que ya existía 😮
This plus a hydrogen generator and the oil industry is Crushed! Not to mention LESS poluttion!
put the tester while turning the engine slowly lets see the actual voltage
he wont.
And show this is a snake oil con.
This is an ac motor supposedly driven by an ac generator. The speed of the motor is set by the frequency of the generated ac, So how is the speed locked to give 240 volts at 50 cycles?
It's done at the DC out bridge rectifier. And the weight of the rotor. In Robert Adams original design he used a rotor made of foam and claimed 130% efficiency and RPMs exceeding 12,000.
Its supposed to lock into speed by starting open circuit then applying a load then taking the load off again which makes it hit "pulse resonance".
There are videos of this phenomenon happening just look up Robert Adams generator.
question will that still work if it was hit by an eletromagnetic pulse wave or will it be totaly trashed like all other eletronics reason the question is some solar flare storms can cause emp waves.
Good job
Many places to hide batteries and convertor in all this tubing..
Even if I become a member of this channel and pay the highest membership, I don't get any information about a usable free energy machine because of that, do I????
Buy some fruits instead of spending your money for such things. Coz this is purely a lie my friend. No one will share a secret on UA-cam. Stop becoming patreon of this channel.
Freie Energie.... die man kaufen kann. Ein wiederspruch in sich. Verteilt doch einfach den Bauplan, damit sich jeder diesen Generator selbst zusammenbauen kann. Für die anfallenden Materialkosten muss jeder selbst aufkommen. Wenn der Generator dann auch funktioniert, ist es den Aufwand auch Wert.
That guy’s face was blurred out so the men in black suit won’t be able to identify him and quiet him down.
Why don’t you contract with supplies to sell the parts so that you won’t have to rely on the UA-cam algorithm to make more profits.
Yes, because we all know that big companies love products that damage their schemes.
Voy a hacer el mio, seguire la leyenda y reglas “La energía ni se crea ni se destruye solo se transforma” bendiciones para todos los que hacen posible que nos llegue esta información,
tenemos todo en este planeta para construir y tranformar energia, tenemos todo cuidemos tambien nuestro planeta.
Why left and right coils don't connected?
К сожалению это фэйк. Во первых напряжение, которое показывает автор соответствует напряжению в сети с теми же погрешностями. Видео имеет несколько склеек в самые ответственные моменты, когда автор разбирает и показывает внутренности и электросоединение. 13:27. Ровно на 15:35. Видно что 2 лишних провода уходят прямо в двигатель, с низу. явно видно , что они идут внутрь двигателя. На 18:44 , когда автор перевернул раму, во фланце двигателя явно видно не заводское отверстие, уходящее к обмоткам. Вы могли бы сказать, что это дренажное отверстие, НО Двигатель на фланце устанавливается не только коробкой вверх, но и в других положениях. Поэтому дренажное отверстие делать нет смысла. Гораздо более нормальным было бы присоеденить две катушки по бокам!!!. (на видео они не принимают участия в работе). Их лучше было бы видно. Но автору очевидно нужно было , что бы провода уходили вниз. Поэтому была использована верхняя и нижняя катушка. На 17:17 идет склейка в самом ответственном месте. ЗАЧЕМ?
Если человек хочет убедить всех в том, что он победил все законы физики, то нужны более убедительные аргументы. Но автор предпочел снять дешевый ролик.
Автор, если ты хочешь , что бы тебе поверили. Подвешивай свой аппарат на стальную цепь только на 1, а не на 2-4 штуки, расставляй 4 камеры со всех сторон. Без склеек видео.
В воздухе запускай свой аппарат. вешай в подвешенном положении электрическую нагрузку. и мультиметром проверяй все значения, включая замеры на подвесной цепи и земли. вот 20 минут такого видео лично меня убедили бы.
Just be careful... you know what they done to Stanley Meyers
What gage wire is used to connect the transformers to each other? 12000 W @ 230 V = 52.174 A. Shouldn't that be 6 ga. Wire? Didn't look any bigger than 10 ga. to me.
dual opposing magnet motors has a chance with the abiliti to turn off magnets --not electromagnets--
I believe because I have made it for myself
What metal did you use for the rotor?
Где можно купить???
can you please give me the parameters of the electric motor? which one did you use?
Judging by the devices he connected to this, it has to be a single phase 220-230V AC motor. Multimeter reading was like 228V or such.
How are those transformer coils giving you a 220vac ????
4 coil=220volt
1coil= 55volt
Impossible 🤣🤣🤣🤣
LOL 230V like from the mains socket, to learn more you just have to become a patron 😂