Garmin Marine Webinars: Panoptix LiveScope Installation and Setup
Вставка
- Опубліковано 13 лип 2024
- You have never fished like this before. Panoptix LiveScope™ is live, real-time scanning sonar. You can see easy-to-interpret live scanning sonar images of fish swimming near clearly defined structure. You can even see your lure as you retrieve it. In this webinar, you’ll learn how to get started with this amazing sonar technology.
Learn More: buy.garmin.com/en-US/US/p/591379 - Наука та технологія
Excellent presentation!
Fantastic video. Thanks for posting this.
Thanks for doing a great job. Very helpful to me.
Awesome video. This was very helpful. I'll be installing a 94sv on my kayak soon. I'm going to try to make so I can easily move it from my kayak to my boat. It should be a fun project.
Correct me if I'm wrong, but unless you'll be on the ocean a lot, you'll probably need 93sv instead?
Great video
Thank you for that video guys. Was about to order the LVS12 but it won’t work with my unit. I’ll keep saving for the full lvs32 rig.
Thanks for the info looking real hard in get a unit for myself been fishing with a friend that has one I like the 32 series with the 12 inch screen do you have any recommendations prospective mount is a must also
great!
Great video i am in the process of installing a Garmin UHD 94sv with 32 lives cope transducer to the stern of my boat, when unpacking and setting up there is 2 transducers firstly do i need to install both transducers if so how far apart do they need to be so they don't interfere with each other grateful for any advice
Not sure if you're still answering comments on this video but thought I'd ask anyways. Is the GLS10 required to run the LVS32 with a 8412xsv or 8416xsv? Someone told me it wasn't while places I've read says it is. Just wanted some clarification. Thanks.
Hello there. I just purchased, and am getting ready to install a 126sv and LiveScope LVS32 setup for a bass boat. I really wish Garmin would consider this suggestion. Due to the possible damage and delicacy of the transducer cable, build the LVS32 transducer with a very short cable and connection with a true waterproof connection, and then a replaceable cable. Then if the cable becomes damaged it could be easily replaced without full transducer replacement. Thanks
Good Evening, thanks for sharing your ideas with us. Please be sure to share them directly with our innovators through this portal: www.garmin.com/ideas
-MR
Is there side imaging on livescope or is it just the 20 degree view? thanks
Hi David, the Livescope doesn't have a sidevu option. -MR
Good video other than the confusion of installing the transducer. The image showing the orientation of the transducer mounted to the shaft of the trolling motor is not correct. #1 and #2 is the transducer is on the port side of the trolling motor, #3 and #4 is on the starboard side. Mike F called them out on this a year ago. Find his comment below.
Is there any installable pole other than the trolling motor? If you have an excel trolling motor holding you in place it’s going to be moving constantly. After reading reviews and going out with a guide on a boat he had an independent pole made for his transducer which he could turn 180 degrees or more? Any advice
Hi Thomas, we don't make a pole. It would need to be a third party purchase or custom-made. -MR
Hi there! Im gonna buy ehcomap 106sv. My question is can I use at the same time livescope lvs32 and regular transducer together?
Good Evening, thanks for reaching out to us! Yes, you can use the LVS32 transducer with the GLS10 and another transducer at the same time. -MR
@@GarminInt Can you mount them close together, the transducer and the live scope Lvs32 and do you need too or does the LVS 32 do it all
What about LVS 34 ? Do You has same “webinar” about LVS 34?
@garmin - I see alot of people installing a small circuit breaker/switch for the Black box. I see it in the install instructions as well but no info on what type? My boat has a full power switch shut off but I wanted to be able to shut the box off and still use other units when not running the livescope - without shutting the whole power off to the other units Any info would be great
Hi Greg, please get in touch with our marine support team at the following link: bit.ly/GarminContact-US
They'll be able to help guide you with the installation. -MR
Hi my son just bought a the garmin echomap uhd 93sv with the panoptix livescope. we can't find the panoptix menu, it has the sonar and everything else. my question is do we need to download the panoptix or was it supposed to be already installed
Hi there! Please follow the steps outlined in this FAQ to ensure that the software on your ECHOMAP UHD 93sv is up to date: ms.spr.ly/6059VxUi5
If you're still having trouble, then I suggest reaching out to Garmin Support directly so they can take a closer look. You can do so using the information listed under the "Contact Us for More Help" section here: ms.spr.ly/6050VxUig
Kind regards,
(KS)
Is it ok to run power straight from a battery to the black box and head unit, or do I need a fuse? The battery is going to be used just for live scope, nothing else will be powered by it this battery.
Yes, our units come with an inline fuse. We recommend running the power directly to the battery.
-MR
Always use a fuse. It doesn’t matter if it’s the only thing on the battery or not. If it’s connected to a battery it needs a fuse unless you want to risk frying your gear. It’s a $5 investment for an in line blade fuse and holder to protect thousands in equipment.
If I buy a unit without a transducer, and the buy livescope. Will the garmin force trolling motor work for down and side scanning.
Hi. The Force Trolling motor has the GT56 transducer built into it. So it would not need an additional standard transducer. Please let me know if I can help with anything else. -MR
I just installed the livescope setup with my echomap UHD 95sv. The GLS10 black box doesn't turn on (no status LED lights up). I've tried everything. It's like the GLS10 is dead on arrival.
Hello Alexander, please check to see that the GLS10 is getting at least 12 volts and is connected directly to the battery. Do you see a flash at all on the status lights? -MR
What gauge wire is needed to make the power wire longer?
Hi Justin, thanks for reaching out! The wire gauge needed would depend on how long the extension would need to be. It is a 20 gauge wire and typically, it is one size larger for every ten feet to minimize amperage loss. -MR
Do you keep your original transducer installed also?
Hi John, thanks for asking! Yes, you may keep the original transducer installed as well. The Panoptix Livescope system uses a different connection than the standard transducer. -MR
How hard is it to keep the live scope on target on very windy days when on spot lock is engaged and live scope is mounted to trolling motor shaft?
If the transducer is connected to the trolling motor and spot lock needs to turn the trolling motor to stay on spot, your image will turn as well. -MR
Check out the independent mount we're making on Instagram @Smallmouthfreaks
Can you use your LVS32 transducer for ice fishing or is there a different one for ice fishing?
LVS32 transducer is used for ice fishing and open water.
@@sethmaslowski5820 thank you, that’s all I needed to know.
Thanks for the assist, Seth! You're absolutely correct. -MR
I'm putting a boat together for ocean fishing. I want to use the 8616xsv with lsv32, at what limit in feet does this transducer work effectively in the down mode ?
Hi Robin, the LVS32 transducer has a maximum depth of 200 feet both forward and down.
-MR
@@GarminInt is it possible to run 2 transducers on the 8616xsv separately ? 200 ft is not enough where I live, but if I'm camping or hunting the lsv32 would be perfect for shoring and missing the rocks.
Yes, it is possible to run two transducers on the GPSMAP 8616xsv. It has both the 8 pin and the 12 pin ports. -MR
@@GarminInt awesome thanks
his transducer orientation is opposite in my owners manual instructions. Number one should be port side on so on.
I have this question also. My Motor Guide Xi5 trolling motor propeller is toward the stern of the boat in normal forward running position, and the trolling motor is mounted on the port side of the boat. When my trolling motor is deployed and in the forward run position (i.e. straight ahead) my LiveScope LVS32 transducer is on the port side of the trolling motor shaft, i.e. outboard of the trolling motor shaft. This is image 1 and 2 in the "Installation" image at 14:30 minutes. Please clarify.
@@raybrown1954 Garmin screwed up and they should alert everyone so the confusion doesn't continue.
Mike F replied a year ago, "The motor is backward at 15:19, which tells you how to install Livescope; starboard is port and vice versa."
Garmin replied to Mike,
1 year ago
Thanks for pointing that out, Mike! The orientation of the transducer is correct but the direction the barrel was facing was not correct. -MR
I could be GARMAN!!!!
I will be using two cradles to move 106sv between CC and bow. Will the network ports on empty CC cradle bridge connection to the LS box while working from the bow position?
Hi, John! No, there would need to be a unit in the cradle to operate that port. (KS)
Which unit would u recommend 1222 or 126sv snd reason please
Where will you typically be boating? -MR
Looking at getting one with a 12 inch screen with the 32 series and a prospective mount do you have any specific advice
Hi Randy, which series are you looking into getting with a Panoptix Livescope system? -MR
@@GarminInt not really sure would love some advise but I do know a 12 inch screen is best for me
Hi there! I'd recommend an echomao Ultra 126 or a GPSMAP 1243xsv. Both are 12" screens and compatible with the Panoptix Livescope System. -MR
At the time I bought my unit there were no more 93sv UHDs, so I bought the 94sv UHD and I purchased the lake maps chip is that ok to use with that unit in freshwater?
Good Evening, the ECHOMAP 94sv has coastal charts of the United States. It does not include lake mapping. If you're are interested in purchasing lake charts, it will work for freshwater. The charts can be purchased at the following link: lakes.garmin.com/
Thank you -MR
What size is the transducer cable diameter.
Hi there! There are two cables side by side and each of them should be about 9mm in diameter. (KS)
How would you set this up for ice fishing
Hi Doug, I'd recommend contacting our marine support team at the following link to see which options are available to you. They can be reached at the following link: bit.ly/GarminContact-US
Thank you -MR
Thank you that awesome. I will be do that in the morning
Another Garmin commercial?
Man's wife says he called out another woman's name in his sleep?
She says ,, Who's Carmin!!!
He says he doesn't know!!
Then it dawns on him!!
Garmin!! He says no baby her name is Garmin!!! Then you cut to him sleeping in his boat in the Garage! Snuggled up to his Livescope!!!!!
I have a thousand ideas for Garmin livescope,,
Two guy pull up the boat for a tournament! They see a guy has livescope,, they freak out!
That guy has livescope , no don't make eye contact, don't make any sudden moves! Just turn you head slowly!
IM TELLING YOU HE HAS LIVESCOPE!!
WHAT ARE WE GUNNA DO???
Buddy says,, I thinking Waffle house?
Other Buddy says yeah!!
We'll live to fight another day!
Let's get outta here!!!
I’m even more confused