I just bought the updated model of this, model # 201159. Reading the manual, there is a drain bolt on the bowl of the carburetor. One of the reasons I chose Champion is it's a well thought out machine. And yea it's heavy. I wheeled mine home from Tractor Supply across the street. It will be difficult for someone to rip it off. Plan on using full synthetic 5W-30 after break in. There is a gas station near here that offers non-ethanol, just opened maybe 2-3 years ago. Before that, I don't think non-ethanol was available around here. I've used fuel stabilizer for years and can't recall having any problems. I'm glad I have the generator. The technology and power for portable generators seem like they are improving at a rapid rate.
Next time you do a video on this generator, show how it starts using the pull/recoil cord. The gel lead acid batteries used for starting only have finite shelf life and if it lacks the charge to start the unit, if you want power you must fall back to pull start.
I have the same generator and have used it for many power outages. It is easy to start and reliable. My one criticism is that it does not have a fuel gauge.
I have the same model. About a month ago we lost power for 24 hours and ran all I needed with it. We have a GenerLink installed by our local power company and it worked great with this generator!
I haven't been able to get mine to work with my Generlink, my old genny worked fine but wasn't enough running Watts. Do you have the 30A or 40A Generlink?
What’s your thoughts on this. The manufacturer says when you shut it down by turning the gas off that you should “Remove the spark plug cap and spark plug and pour about a tablespoon of oil into the clinder. 8. Pull the recoil cord slowly to crank the engine to distribute the oil and lubricate the cylinder.” With the generator running, turn the fuel select dial to the "GASOLINE OFF" position and allow the generator to run until the engine stops from fuel starvation. This may take a few minutes. 6b. Turn the fuel select dial to the "ENGINE STOP" position and allow generator to cool completely before continuing. 7. Remove the spark plug cap and spark plug and pour about a tablespoon of oil into the clinder. 8. Pull the recoil cord slowly to crank the engine to distribute the oil and lubricate the cylinder. 9. Install the spark plug and spark plug cap.
They are referring to the "long term storage" shut down procedure which I think is excellent advice. However, they define "long term storage" as only "two weeks or longer." I think most generators sit for much longer than two weeks between uses. I know mine does. Because of this, I guess we should be following this long-term storage shut down procedure every time we shut it down. Hmm. Interesting. Thanks for bringing that up. Now, in my honest opinion, this recommended procedure seems just a bit overkill .... I would personally define "long-term storage" as a MUCH longer period of time than they do.
I’ve heard and read that propane burns hotter than gasoline. Further, this can lead to a hole being burned into the piston, rendering the unit unusable. No time frame was given as to when this will happen.
My wife and I just bought the 12,500/9,500 model. We plan to use if for the furnace, chest freezer and fridge. Maybe some other odds and ends like the TV and internet. You think it'll be sufficient for that?
It should be. When you try it the first time with everything running just check the load indicator on the generator. That will give you an idea of how much it can handle.
@@AntiqueCarsandStuff for sure, give it a trial run. It seems like it'll have plenty of power for that stuff and more but thought ife ask someone with experience. Have you had to use it since the video?
Define your "furnace"? If your furnace is electric and on a 120 amp breaker, then no, this generator does not stand a chance in powering it at all. Now is your furnace natural gas, propane, oil? Then yes, it will power it fine.
@@AntiqueCarsandStuff I was able to run everything I needed and it only showed about three bars of six! When the power company hooked it up with my Generlink, he told me I had plenty of power with some to spare.
I just bought the updated model of this, model # 201159. Reading the manual, there is a drain bolt on the bowl of the carburetor. One of the reasons I chose Champion is it's a well thought out machine. And yea it's heavy. I wheeled mine home from Tractor Supply across the street. It will be difficult for someone to rip it off.
Plan on using full synthetic 5W-30 after break in. There is a gas station near here that offers non-ethanol, just opened maybe 2-3 years ago. Before that, I don't think non-ethanol was available around here. I've used fuel stabilizer for years and can't recall having any problems.
I'm glad I have the generator. The technology and power for portable generators seem like they are improving at a rapid rate.
I'm happy with this one so far. I think I've used it three times now for power outages in the last couple years. It works great.
I love the generator cover you made from the box. Very cool idea.
Yes! I got that idea from a friend.
looks good but I thought the champion generators come with a cloth cover?
@@schwinnbikingWith some Champion units, they are sold separately
Next time you do a video on this generator, show how it starts using the pull/recoil cord. The gel lead acid batteries used for starting only have finite shelf life and if it lacks the charge to start the unit, if you want power you must fall back to pull start.
I have the same generator and have used it for many power outages. It is easy to start and reliable. My one criticism is that it does not have a fuel gauge.
My champion 100891 has a fuel gauge, definitely is a plus
yep has a fuel gauge on top
I have the same model. About a month ago we lost power for 24 hours and ran all I needed with it. We have a GenerLink installed by our local power company and it worked great with this generator!
I am happy with mine so far also!
I haven't been able to get mine to work with my Generlink, my old genny worked fine but wasn't enough running Watts. Do you have the 30A or 40A Generlink?
@@travist6453 I have the 40A.
What’s your thoughts on this. The manufacturer says when you shut it down by turning the gas off that you should “Remove the spark plug cap and spark plug and pour about a tablespoon of oil into the clinder.
8. Pull the recoil cord slowly to crank the engine to distribute the oil and lubricate the cylinder.”
With the generator running, turn the fuel select dial to the
"GASOLINE OFF" position and allow the generator to run until the engine stops from fuel starvation. This may take a few minutes.
6b. Turn the fuel select dial to the "ENGINE STOP" position and allow generator to cool completely before continuing.
7. Remove the spark plug cap and spark plug and pour about a tablespoon of oil into the clinder.
8. Pull the recoil cord slowly to crank the engine to distribute the oil and lubricate the cylinder.
9. Install the spark plug and spark plug cap.
They are referring to the "long term storage" shut down procedure which I think is excellent advice. However, they define "long term storage" as only "two weeks or longer." I think most generators sit for much longer than two weeks between uses. I know mine does. Because of this, I guess we should be following this long-term storage shut down procedure every time we shut it down. Hmm. Interesting. Thanks for bringing that up. Now, in my honest opinion, this recommended procedure seems just a bit overkill .... I would personally define "long-term storage" as a MUCH longer period of time than they do.
Good Champion does make a good product. Generac take notes put a 50 amp plug on generators
Nice review. Thanks.
The set up looks like the old Briggs and Stratton generators
Awesome video thnx, I have the same one will be using it more often..
I like this generator but I'm tempted to get the lower powered dual power one 201214 that runs on gasoline and propane. Its $200 CAD more.
I’ve heard and read that propane burns hotter than gasoline. Further, this can lead to a hole being burned into the piston, rendering the unit unusable. No time frame was given as to when this will happen.
i wonder if this generator can run a 30 amp 220 plasma cutter
My wife and I just bought the 12,500/9,500 model. We plan to use if for the furnace, chest freezer and fridge. Maybe some other odds and ends like the TV and internet. You think it'll be sufficient for that?
It should be. When you try it the first time with everything running just check the load indicator on the generator. That will give you an idea of how much it can handle.
@@AntiqueCarsandStuff for sure, give it a trial run. It seems like it'll have plenty of power for that stuff and more but thought ife ask someone with experience. Have you had to use it since the video?
Not since the update video but I ran it for about 3 hours during an outage last February and it worked perfectly!
Define your "furnace"? If your furnace is electric and on a 120 amp breaker, then no, this generator does not stand a chance in powering it at all. Now is your furnace natural gas, propane, oil? Then yes, it will power it fine.
@@AntiqueCarsandStuff I was able to run everything I needed and it only showed about three bars of six! When the power company hooked it up with my Generlink, he told me I had plenty of power with some to spare.
Add wheels to the other end and hook up an electric drive motor so you don't have to push it around.
Nah, I’ll just have the wife move it around for me.
How long did you use it for the power outage? Does it run your well?
It was only 2-3 hours. Yep, it runs the well!
"....and this thing worked like a champ".... ion?
What gauge of wire did you use for the cord?
I’m sorry I don’t know. I had the electrician make it and I don’t know what he used.