Dude excelled video. Had a m2 crank no start would crank and run a min and die or no start at all. Bypassed 12 volt batt + wires worked. Traced the pwr feeds to a 30 amp in the underhod panel. Found the main pwr feed wire to the box corrodes and intermittent when cranking the pwr would glitch out. Your bypass on the pwr side helped me zone in on it.
Could you go into more detail on the fix for this? I have the same problem. Maybe a video on your channel? My truck turns off so unexpectedly I cant take the chance of driving it to the shop and may have to have it towed.
@@Jengoboys603 I think I found the problem. It was a corroded relay in the long fuse box. I clean it and the slot it goes in. Was able to go on a 1hour test drive and then 150 mile load and back. Thanks.
Unfortunately. I am no longer working in a shop where you can just come in and get your truck fixed. I am now working for a Crane manufacturer with a private service department.
Dude excelled video. Had a m2 crank no start would crank and run a min and die or no start at all. Bypassed 12 volt batt + wires worked. Traced the pwr feeds to a 30 amp in the underhod panel. Found the main pwr feed wire to the box corrodes and intermittent when cranking the pwr would glitch out. Your bypass on the pwr side helped me zone in on it.
Could you go into more detail on the fix for this? I have the same problem. Maybe a video on your channel? My truck turns off so unexpectedly I cant take the chance of driving it to the shop and may have to have it towed.
@@dmagic1one check all the wire terminals of on the driver side engine fuse panels
@@Jengoboys603 I think I found the problem. It was a corroded relay in the long fuse box. I clean it and the slot it goes in. Was able to go on a 1hour test drive and then 150 mile load and back. Thanks.
What if you fried your bulkhead module? Would this method still work or not? Can I buy any used freight liner BHM and have it programmed to my truck!
Hi. I have the truck Freightliner. So the truck do not start
. It's because of the BHM. How can i delete security in the bulkhead module. Thanks.
Any luck?
Mine after 65mph the speedometer shuts off and a check engine like comes on, and it also shows a code bh33. Do you have any idea what that is ?
Greatjob❤️❤️❤️❤️
I’m also seeing a 6918 fail 7 code. Any idea ?
there is a service bulletin out for that code number 54-320
I have no clue what your talking about😂😂🤪. I’m a girl❤️
Where is your shop located?
Unfortunately. I am no longer working in a shop where you can just come in and get your truck fixed. I am now working for a Crane manufacturer with a private service department.