Brother, you have no idea how much time you just saved me!! Thanks a lot for this info. I was having the same issue with the fuse, was about to try a known good chassis module and decided to look up my issue before doing that and found your video! 🫡
Hey there, on my 2012 m2106 I am having the same symptoms, but I keep blowing number 19 fuse, would you happen to know if it could be the same problem? Thanks in advance..
What’s the one for the windows!?! I can’t find one on mine 🤦♂️….I have a 2016 m2106 everybody saying it’s this that etc I need help…my window keeps going out
Not sure if there is one. I’d have to look at your particular fuse box. Don’t think I can give you an answer without looking at it. Bring it to me and I’ll figure it out for you. Toptechdieselrepair.com
It’s probably the connector at the chassis Module. I’ve dealt with this many times there is one connector that is always loose on it. Tug on all your connectors and see if one just falls out. Can’t remember what number the connector is. Good luck! Chassis module is under the cab. Above the def tank if your m2 is a tractor. If it’s a bomb tail it’s the module above the batteries.
On this occasion the chassis module had gone bad as well. So, I had to replace the chassis module and the fuel water separator heater as well, but I have had this issue again and just replacing the heater solved it.
Im having a issue with my rear light. When i step on the brake it does nothing. Left works. When i put on the right turn signal, it does nothing, left side does work. Light is good. Turns on woth the running lights. But thats it.
I am having the same problem stop light not coming on when step on the break. Also, the cruise control doesn’t go off when u stop on the break while driving
Thanks for posting these video you have helped me quick diag two trucks
Thank you for your detailed explanation. Thanks
Awsome. And yes it is hard to find the info you need
Brother, you have no idea how much time you just saved me!! Thanks a lot for this info. I was having the same issue with the fuse, was about to try a known good chassis module and decided to look up my issue before doing that and found your video! 🫡
Thank you….. good sir
Thank you
awsome video!!!
Where are the fuses for the marker lights
same question ^
Very interesting
Hey there, on my 2012 m2106 I am having the same symptoms, but I keep blowing number 19 fuse, would you happen to know if it could be the same problem? Thanks in advance..
You ever figure it out? Same problem right now with fuse 13 and 19. Vbat1 and 3 shorted to ground
What’s the one for the windows!?! I can’t find one on mine 🤦♂️….I have a 2016 m2106 everybody saying it’s this that etc I need help…my window keeps going out
Not sure if there is one. I’d have to look at your particular fuse box. Don’t think I can give you an answer without looking at it. Bring it to me and I’ll figure it out for you.
Toptechdieselrepair.com
My freightliner m2 2013 tail light not working and i did check all the fuses are working. What could be the issue? Any suggestions helpful.
Did you check if you are getting power at the light? Could be a bad light?
It’s probably the connector at the chassis Module. I’ve dealt with this many times there is one connector that is always loose on it. Tug on all your connectors and see if one just falls out. Can’t remember what number the connector is. Good luck! Chassis module is under the cab. Above the def tank if your m2 is a tractor. If it’s a bomb tail it’s the module above the batteries.
Thanks bratha.
@@kiriaedward9192 keep me posted!
Hey do you know the part number for the fuel water separator heater ?
Thanks you,
I don’t unfortunately. I could try to get it for you tomorrow if you still need it.
Did that completely fix the issues
On this occasion the chassis module had gone bad as well. So, I had to replace the chassis module and the fuel water separator heater as well, but I have had this issue again and just replacing the heater solved it.
@@alreyindustries were you getting a check engine?
@@simon1211 I don’t think so. If I remember correctly.
Im having a issue with my rear light. When i step on the brake it does nothing. Left works. When i put on the right turn signal, it does nothing, left side does work. Light is good. Turns on woth the running lights. But thats it.
Where you at? In the Tampa Bay Area?
So cal area
I am having the same problem stop light not coming on when step on the break. Also, the cruise control doesn’t go off when u stop on the break while driving
Sounds like probably a brake switch issue. What year and make is your truck?
Access to Freightliner Service Information is not very easy.