magagandang post ito, masasabi kong masustanysa. napanood ko na rin ang iba pa tulad ng conventional fuel injection system tuning ni Mr. DIYer. Snappy ang presentation.
Thanks for taking the time to make this video. It was very useful to me I have the same problem and will try and repair my bearings using your method Greetings from Sydney Australia
Sir, i wanna ask you.... i have innova 2kd-ftv... Its have strange noise (clicking) when starting in the morning... but it goes away after few seconds.... and the oil pressure light its not immediatly off, need 2-3 seconds to off.... People says its normal, but i thinks its something wrong.... can you enlighten me...
Packing to much grease will take it out of action eventually. Second, hitting the inner ring will increase the risk of destroying the life of the bearing. Otherwise perfect, thanx
happy new year Mr. DIYer, my pajero 4d56 drives ok in foward but misbehaves in reverse when driven for over 15kms. it wont engange revers immediately till after few minutes as long as lever is in reverse. any advise is welcome.
do you have a tutorial showing how to remove compressor pulley assembly? without removing po sana yung compressor. showing proper way in a tight space sir. thanks so much po. ganyan na ganyan po. innova 2006 diesel
Hi i have a 2.7litre J2 kia diesel when i start my van i let it warm up until the temp gauge just starts to move upwards and then drive it as softly as possible until it fully warms up. When the temp gauge is about a quarter to 3quarters from fully warmed up my van makes a humming noise at about 1500 to 1600 rpm. If i pull my clutch in and coast the noise stops. Once fully warm this noise goes away and the engine sounds good. My engine did not used to make this noise during warm up. What do you think could be causing this noise. Is it a bad problem that must be addressed asap?
If the sound goes away. I would say its normal. Part of the warming up process. But you would want to check the thermostatic valve especially if the engine temp goes up and down
Sir baka puwede matanong kung ano size ng bearing sa alternator Salamat. Plano ko kapag magpalit ng pulley ay sabay kona palitan ang Bearing sa alternator
di ko po matandaan na ng nakakasigurado sir. mahirap na sabihan kita ng bearing size baka mali pa mabili mo mas mainam na kung nabaklas na saka pa susukatin para sure.
Very informative. Impressed with the way you overhaul the bearing as opposed to replacing it .
magagandang post ito, masasabi kong masustanysa. napanood ko na rin ang iba pa tulad ng conventional fuel injection system tuning ni Mr. DIYer. Snappy ang presentation.
Thanks for taking the time to make this video. It was very useful to me
I have the same problem and will try and repair my bearings using your method
Greetings from Sydney Australia
Thanks Mate, diagnosed my engine noise using your method of removing the belt and running the engine 🎉
Merry Christmas Mr.Diyer...please upload more of D4D TOYOTA
Very practical and informative thanks
muchas gracias,yo hubiera pensado en reemplazar todo el bearing, pero la solución de reengrasar me pareció muy buena.
Sir, i wanna ask you.... i have innova 2kd-ftv...
Its have strange noise (clicking) when starting in the morning... but it goes away after few seconds.... and the oil pressure light its not immediatly off, need 2-3 seconds to off....
People says its normal, but i thinks its something wrong.... can you enlighten me...
What was the brand name of the bearing stock? Thanks
When u have a noise at one of the pullys. What type of noise if coming from eng. Plus ur noise is only when reving up the eng. mine is always
Thanks have a nice holiday
Thanks u saved me 203 bucks for a new one.
Glad my video enabled you to save money.
Thank you big help
Very Helpful Mr.DIYer my Innova started making this noise , Thanks at least i have an idea now , ohh and great its in English :) (Subscribed)
Sir can you make video about Dash/tacometer being blackout. For fortuner d4d too. Thank you sir.
may God bless you
Packing to much grease will take it out of action eventually. Second, hitting the inner ring will increase the risk of destroying the life of the bearing. Otherwise perfect, thanx
happy new year Mr. DIYer, my pajero 4d56 drives ok in foward but misbehaves in reverse when driven for over 15kms. it wont engange revers immediately till after few minutes as long as lever is in reverse. any advise is welcome.
Try this ua-cam.com/video/B50xcyhT_oQ/v-deo.html
Hipe thay helps. Happy new year
Sir, same lang ba ang both idler pulleys nya? Like same parts code? Tyvm!
Great video thankyou. Merry Christmas to you all. 😊👍✌️
do you have a tutorial showing how to remove compressor pulley assembly? without removing po sana yung compressor. showing proper way in a tight space sir. thanks so much po. ganyan na ganyan po. innova 2006 diesel
thanks for the good video👍
Present Sir 🙋
Merry Christmas
Merry xmas.
At 10:05 min. lower your volume before your ear drums get blown out 😂
sorry. lol
Very good sir..Goodjob
Sir same sound i change adjuster and starring pump but sound is still same
Hi i have a 2.7litre J2 kia diesel when i start my van i let it warm up until the temp gauge just starts to move upwards and then drive it as softly as possible until it fully warms up. When the temp gauge is about a quarter to 3quarters from fully warmed up my van makes a humming noise at about 1500 to 1600 rpm. If i pull my clutch in and coast the noise stops. Once fully warm this noise goes away and the engine sounds good. My engine did not used to make this noise during warm up. What do you think could be causing this noise. Is it a bad problem that must be addressed asap?
If the sound goes away. I would say its normal. Part of the warming up process. But you would want to check the thermostatic valve especially if the engine temp goes up and down
@@MrDIYer Thankyou for your advice it is much appreciated. 👍
Very good expérience. But i notices something else ans différent of thé subject. The AC clutch is not completely ok, us it ?
Its working like it should. Because i turned on the ac. Thank you.
What the number of bearing???
Thank sir. If kakaulan lang and may squealing sound pag-andar ng makina, ibig sabihin ba need na palitan ang belt?
@@SeriousPinoyGamer patungo na sa palit belt yan. Mawawala man yan pero babalik at lalala rin eventually
@@MrDIYer Thank you
Thanks
Hello sir..have you encounter a problem in the oil filter that is not working?
Our unit is Strada triton
Replace oil filter everytime you change oil.
We always replace but the problem is on the new filter it's defective
Location Sir. Thanks
Sir baka puwede matanong kung ano size ng bearing sa alternator Salamat. Plano ko kapag magpalit ng pulley ay sabay kona palitan ang Bearing sa alternator
di ko po matandaan na ng nakakasigurado sir. mahirap na sabihan kita ng bearing size baka mali pa mabili mo mas mainam na kung nabaklas na saka pa susukatin para sure.
What to do if we have already used WD 40 on the ac compression
Pray that it wont leak.
Good 👍
Sir ano size ng bearing
Thanks My main
You could of damaged the bearings by removing them with a hammer. The background noise sounds like the Philuppines.
It seems to me that it is better to remove the boot, rinse it and service it with a suitable oil, it will last much longer