Це відео не доступне.
Перепрошуємо.
S1 E2 F.A.I.T.H. Moreno valley rail delivery services DD13 spn 2631 fmi 1 low power check engine
Вставка
- Опубліковано 29 лют 2020
- WARNING!!: ⚠️⚠️⚠️
Always use the proper tools and safety equipment to perform this job.
Failure to perform the job correctly can result in personal injury or vehicle damage.
Don't do this job if you think you don't have the experience or the equipment to do this job correctly. REMEMBER SAFETY FIRST!
Warning!!! ⚠️⚠️⚠️
This video is just a demonstration of the labor to do to perform this job, the results may vary.
Also, the damage found can be greater that expected and it can result in a massive engine failure.
This video contains advance technician information.
2015 freightliner cascadia DD13
his truck had the following codes
Spn 2631 fmi 1
low intake air pressure
this code refers to a low press in the intake manifold while the engine is requesting more power
possible caused are
bad egr delta p sensor
egr tube low flow
cac leaks
exhaust leaks
intake press leak
throttle valve stuck close
bad air filter
broken turbo
This problem is going to be similar for all trucks
freightliner wester star mercedes benz
DD13 DD15 DD16 OM471 OM472 OM473
hello, I am FranciscoAmaya and I am introducing this the editions of videos where I will go give you a visit to check your truck called F.A.I.T.H. (FRANCISCO AMAYA IN TRUCKING HELP)
To qualify to for my help is pretty simple.
1. be a subscriber on FRANCISCOAMAYA UA-cam channel
2. be a subscriber on I.E.euros UA-cam channel (my second channel)
3. be a follower on Instagram. search for francisco amaya youtube
once you have done all this you are in!!
now you have to send me a messege via instagram and if i dont respond the first time try again, please.
please, send me the following information on instagram
1. location
2. year make engine and model
3. problem with your truck
4. why should i visit you
note: my visit will be charged depending on the location and problem with your truck.
note: this is just an inspection, i will not fix your truck on the spot.
note: if i dont know anything about the problem i will be totally honest with you but it will be up to you if you still want me to visit you
Thank you for watching Francisco Amaya UA-cam channel
FOLLOW my channel to get more informative videos and use the comment section to share opinions. Also, check my community section of my channel and be part of the surveys and questions about my channel so I can guide my videos in the right direction to give you the best information.
______________________________________________
Now acceping support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
P.O. box 672
Fontana CA, 92334
OR
PAYPAL
www.paypal.com...
(remember to add your address at PayPal donation)
Follow me on Facebook
www.facebook.c...
Follow me on Instagram
/ francisco_amaya_youtube_
Check my channel for more videos and information.
/ @franciscoamayayt
Check my other UA-cam channel
I.E. euros
/ @ieeuros
Question!?
Email me
franciscodamaya@gmail.com
______________________________________________
F.A.I.T.H. SEASON 1
• SEASON 1 F.A.I.TH...
______________________________________________
Radio station: 96.7 FM Kcal rocks IE
Listen live online
www.kcalfm.com/
or
Download the app
play.google.co...
#franciscoamaya #franciscoamayafaith
Am a Blackhawk helicopter mechanic in the military but you have convinced me after watching 90 percent of your videos to venture into O/O business so I can work on my own truck. Good job brother
Thank you!!
Bout time I see your face Francisco little fellow but still awesome keep up the good work Shalom Israel
@@tekoaisrael8741 it doesn't match the voice right? Hahaha nice dude
I had this same issue after the boys at the Wildwood FL truck wash cleaned my engine bay. They sprayed the DPS too close and water logged it. After cleaning it out with a piece of wire and some compressed air it still threw the code. So I had to buy a new sensor. Worked like a charm after that. We all like a clean engine bay, but you got to watch them folks. They don't know what they don't know. Thanks for your videos Amaya, you've helped me more than once. 😎👍🏼😎👍🏼😎👍🏼
Did you use a laptop 💻 with the program to calibrate the new sensor ? Or just install it and that’s it?
Drivers in Cali are lucky to have you around Francisco
Man thanks for uploading these videos. I'm gonna start watching your channel more and more and learn. I'm a 18 year old truck and coach apprentice and your videos help me out like a lot. Please don't ever stop uploading these videos man.
Love the videos Francisco! Keep up the good work.
This is pretty cool man... I really hope this channel continue to grow..... your videos really help me a lot..
Always good information Francisco!!👍🏼👍🏼
Hopefully I get a chance to see you one day!
Francisco you are God's gift to the world as well as the true gift to us Freightliner owners I'm speaking for all in acceptance keep doing what your doing ✌ my guy. May you stay Healthy and blessed🙏
Great video frank . Good job bro .in my opinion you are a very knowledgeable mechanic 👨🔧 👍👍
Thank you!!!
I lift out the egr pipe first from cab side my man ! Pull up then front comes out by twisting when pulling up. Very easy out !
I like this guys video , he looks genuine
That's the homie!!! Went to school with him. That's crazy lol
Is you serious? Lol
Man wish u would come to north Carolina!. U r awesome
Fransisco I've clean at least 20 of these silly things with a pic.i just replace them now.thier a pain,outstanding video!!!👍
I love the new style videos. Thank you amaya
Thank you!
Gracias por todo francisco nos ayuda mucho.desde honduras saludos.bendiciones.
Francisco gracias por todo. Mira mi Freighliner cascadia hace un silvido mientras condusco y se pone en fallo . Al parecer el silvido viene del área del turbo ¿ que sera ….?
I have the same whistle. Did you ever find out the issue. I just got the 2631 1 code today.
This was a very good video sir thank you PRIMO. HOPEFULLY YOU CAN LOOK OVER MY FREIGHTLINER IM BUYING ONE BECAUSE OF YOU AND YOU AND YOUR EDUCATIONAL VIDEOS MY FRIEND GOD BLESS YOU HOPE TO SEE YOU IN ONTARIO,CA LOOKING AT MY TRUCK TAKE CARE FRANCISCO..🙏🙏
Thank you!
cut off that zip tie and throw it in a electric drill and use that to clean out the delta-p sensor ports. works like a charm.
Francisco Amaya is the "Truck Doctor."
Bout time I see your face Francisco little fellow but still awesome keep up the good work Shalom Israel
Very good video thanks hope you do more
Great video brother keep it up
Its the freightliner doctor! Doing a house call.
I bought the egr sensor but no gaskets came with . From China. You ever in Wisconsin? Good Man Francisco.
Thanks for sharing
te miras y te escuchas muy honesto amigo no entiendo mucho inglés
Muchas gracias!
I don’t have DEF I got the same problem but inside mine got some carbone
With time every thing gets better..... We’re going to look back at this video and say this came along way...
Making u work hard francisco 😆
Good algo simple si nosabes te vuelve Loco. Cual es el nombre de ese scanner que tu tines??
Good job Francisco, where is your shop?
Francisco quiero cambiarle ese sensor a mi camión para evitarme esos códigos q vienen y se van, necesito el programa para Calibrar el nuevo sensor ? O solo ponerlo y listo ✔️
I hope you ca one of this days you can look in my truck it has a few code in it
Hola qué tal francisco,saludos una pregunta,cuanto te costo el programa para la computadora
Ese Cuesta $2000 por año. Pero hay opciones 😏
Can thay truck even be in a residential neighborhood????
Good stuff
que tal francisci soy seguidor de tu canal, una consulta tendo un dd 15 que no encuebde pero no tengo scanner, algunos puntos que me recomiendes algun bulbo o sensor que pueda pienteat eliminar o algo asi! gracias
Francisco .tengo un problema con el compresor del aire o quizás con el air driyer.no corta @125 psi.se pasa de los 125 y se va alas válvulas de escape para soltar el aire.ya le cambiaron el secador y yo le cambie la válvula del compresor y sige el problema k no corta a los 125.se va de paso a 135.regule el gobernador y no me deja calibrarlo a 125 si lo dejó a 125 tira todo el aire con el motor andando.
Talvez el compressor esta malo. Cambie la valvula unloader de el compressor
Great video. Now I can put a face to your voice
I always imagined an older guy...but he's a very young 😄
What Software you use
haga videos en español joven gracias
Good job
Good job Francisco. I have not used dddl in a long time. So now the software actually has monitor tabs? So when it goes through a drive cycle the box will show green saying that it has passed?
Correct
@@franciscoamayaYT Wow Cummins needs to take notes from Detroit. They do not include that on Insite.
Where are you located
Come to New Mexico
I pictured you different francisco.
You out here located in California?
Francisco come to NJ
#1
Mine doing the same thing
Sir witch Detroit diesel software I need for computer
Dios te bendiga Francisco. Pague para un rebuild completo de metales y cabezas y el taller en El Paso me dijo que tronaron el motor cuando lo encendieron, ahora me quede sin motor y el dueno me dice que me pondra uno usado y los $15,000.00 que le di los perdi... Me siento defraudado y ahora estoy un mes sin trabajar y sin como proveer para mi familia... Yo le dije al mecanico que viera sus videos porque son muy informativos sobre el DD15 y para hacer un overhaul es muy dificil, pero creo que no lo convenci. Ahora tengo mi camion 2013 Cascadia en el taller y esperando que le ponga ese motor usado y todas las partes que compre sera en vano.... Porfavor ayudeme si me puede aconsejar, se lo agradeceria con mi vida....
Eso es muy malo, cuando un mecanico no sabe lo que hace y no lo acepta, es peor. Lo siento mucho de escuchar eso. No se trata que si el mecanico sabe hacer el trabajo o no, se trata que el mecanico este completamente seguro de lo que hace. Como se llama el taller?
what does having water on the pipe mean?
The EGR cooler is starting to fail
Y no le cobraste?
maestro creo que si trabaja asi c va a buscar mas dinerito
When u coming to Houston??
Probably by summer time.
Francisco Amaya great
👍
Hi Francisco do you have a email address to reach you personally? Thank you sir
Franciscodamaya@gmail.com
Or busqueme on Instagram come FranciscoAmaya UA-cam
Just mute and watch his actions seems like he is a rapper..🙃
LoL 😅😎
This Latino brother here is awesome
Please let me know when your around commerce CA. 310 3504140. Been having a problem with regen and no mechanic can figure it out. Thx
I can go one of these days. Contact me on Instagram. Look for Francisco Amaya UA-cam
Delete it or move to the southeast
What a waist of time for a lazy driver
Rail delivery is a crappy company