Awesome job man! Thanks for the videos, I'm a bodyman of 36 years turned painter and learning alot from you're videos and the Gunman. Just bought the combo DV1 clearcoat and basecoat guns. Hopefully they work well. Thanks for the info brother!!
Absolutely gorgeous!! This was my dream car in high school. Thanks to Samcrac for turning me on to the channel. Best part of rebuilding or restoration is the detail & painting of a project. Thx
Kandy man I love your vids brother I find myself setting watching them for hours , thank you for all your time and help you give us , I truly appreciate you brother, and just ordered your denim pads , take care sir God bless
I found this video, it’s an older one for you, but be to me. Impressive is what comes to mind, you are an excellent talent. I hope I can make the boats I spray, look close to the cars you spray. Pretty work Sir!
Nice style of painting. I’ve been painting since I was 19 (51 now) and I paint using the same technique as you (long left to right passes). I did May candy paint jobs and I know how difficult it can be but your style/mine seems to work best. Great video and nice job!
Wow 5 hours in the booth ….mate that come out clean good job …I felt my back go watching you reach over the hood haha …from another painter to another mate brilliant amazing look how straight that car looks your on fire ….keep the videos flowing can’t wait for the next one …flat and buff video wouldn’t go a miss here….west Oxford body shop says your the man …well happy for you brother,
You killed it and made it look easy! The pressure of painting a true urethane kandy is immense, every step is a booby trap right up until the last coat. How do you go about the sealer drifting into the jams as it always goes further than the base? Do you find 3 coats has enough uv holdout for the kandy? Awesome job 👏 it must be beer time now after that big booth session
Thanks for the support 3 coats is plenty have done many over the years holds up well far as jams fine line tape as tight as possible pull fine line before fully setup carefully but some times do some touch up were needed.
Watched all videos straight after each other very mesmerising awesome very clear communication and explanation but I need to know Because the jambs are painted and cleared what do you do so no sealer or base gets sprayed in the gaps on the fresh paint? 😎 I’m almost ready to paint my first car at home
@@kandyman5315 so if i understand correctly.....i tape on or very near the seam when jamming and then follow that line exactly when taping before painting the exterior? This has been boggling my mind as i prepare to paint my c10 in a new gm tint coat. (wildcherry tintcoat)
Nice job you flowed with the products.Do you have to flow coat or you just need a High Solid Clear.Do like European Clears or American High Solid Clears.Nice job again i learned a few new tracks
Lots guys say if you flow coat it shines even more im depth is that true? What clear did u use? H.o.k show clear? What was your fluid for the gun wide open?
1 time hit it and quit great job. So were you dustin the candy on or lil heavier than that. I'm about to do a candy Magenta on a motorcycle. And I always let my silver base dry overnight before spraying my camdy.
What clearcoat did you use on it the car looks amazing I’m looking for a good clear for car I wanna keep Are used to paint 40 years ago so I’m not up on the good clears don’t want to get crazy expensive though
From the UK, never enough room in a booth with a big car...had a heart moment when the hose came close to the drivers side. Lot of work very nice job.
Good work. Paint layed down right.
Awesome job man! Thanks for the videos, I'm a bodyman of 36 years turned painter and learning alot from you're videos and the Gunman. Just bought the combo DV1 clearcoat and basecoat guns. Hopefully they work well. Thanks for the info brother!!
Glad to hear that 😁😁💯
They will work well if you like to put clear in slow motion
I agree, but love the way it lays it down.
Would like some advice on a little better/ faster clear coat gun if you have one.
Check out my latest video lph 400
Excellent job! 5 hours is a labor of love!
Absolutely gorgeous!! This was my dream car in high school. Thanks to Samcrac for turning me on to the channel. Best part of rebuilding or restoration is the detail & painting of a project. Thx
I came over here from paint societies Channel and I got to admit it you two look like brothers!!
Lol, thanks for checking out the channel
Brutha all i can say is you are a Candy paintin muthaphuka. That is one clean a$$ Candy paint job….color is awesome.👍🏻👍🏻.
Kandy man I love your vids brother I find myself setting watching them for hours , thank you for all your time and help you give us , I truly appreciate you brother, and just ordered your denim pads , take care sir God bless
Appreciate it, thank you, Tim 👊👊
Wow, I saw the work you did on Sam Crac's ZR-1. Very, very nice!
Thank you very much
I found this video, it’s an older one for you, but be to me. Impressive is what comes to mind, you are an excellent talent. I hope I can make the boats I spray, look close to the cars you spray. Pretty work Sir!
👊👊
DAMN !! Great job ..... you're a hell of a painter. I can't wait to see that outside in the sun..... great color choice
Thank you. 😊
Dammmmmit Boy.....
It's crazy how I'm subscribed, have notification on, yet I'm just seeing this video 2 days later smdh
I've seen that happen before crazy 🤪
I'm a small fish in a big pond lol
That's the bad thing. A sag, a run, anything. And you start over. Great job. The pro in you shines.
That's the truth 💪 thanks for the support
Clean work
Thank you
😮 perfection at best ! 🔥🔥💯💪🏽👌🏽👌🏽
AWSOME !
Thank you 👊
Nice paint job…. Love the color. You did a great job for Samac. Blue color for the corvette panel. Nice color blue.
Thanks 👍
Sent from Sam! Excited to watch more of your content! Amazing work
Cool!
job will done💯
Came here from Samcrac! Amazing work!!
Thanks for coming
Wow! You have an incredible gift! Samcrac provided the introduction and now I will be enjoying your masterful videos! Thanks so much for what you do!
Thank you 💯
Saw you on Samcrac love your work.
I call first drive lol 🤣🤣 I guess we got a second neck breaker on the road 😆😆👍🏼👍🏼😂😂
It looks fire 💯🔥🔥🔥🏅
Thanks 👍
Great job bru
👊😁
Great Job great result great painter 💯💯💯💯💯💪💪💪💪👍👍👍👍😄😄😄😄
💯💯💯👊👊👊😁😁
Came over because of Samcrac and so happy I did
Glad to hear it
Beautiful work great job
Thank you
amazing paint!
Thank you
Nice style of painting. I’ve been painting since I was 19 (51 now) and I paint using the same technique as you (long left to right passes). I did May candy paint jobs and I know how difficult it can be but your style/mine seems to work best. Great video and nice job!
Absolutely Beautiful thumbs up
Thank you
Beautiful
Thank you
Wow 5 hours in the booth ….mate that come out clean good job …I felt my back go watching you reach over the hood haha …from another painter to another mate brilliant amazing look how straight that car looks your on fire ….keep the videos flowing can’t wait for the next one …flat and buff video wouldn’t go a miss here….west Oxford body shop says your the man …well happy for you brother,
I really appreciate that thanks for the support 👊
Now that's a paint job!!!
Thanks for the support
Bruh! Your my favorite painter now. That job on point, heck of a job 👏
Thank you rocko appreciate it
I watch your videos. You do an amazing g job!
Thank you so much 💯
Great skills an beautiful job 👌👏👏👏
Thanks
Yeah!!
Stunning brother stunning you've absolutely smashed that be proud bro epic finish 👌👌👌👌
Thank you Dean I was very happy with the outcome.
@@kandyman5315 😃😃😃😃
As always, another 🏁. Great job!
Thanks again
Good stuff!!
Thanks!
Amazing! Can't wait to see it in person.
Thanks brother definitely will cruise over when it's all done and grab one of your awesome pies👊👊
You want mirror paint it takes lots work long hours and it truly does matter the product your using so lots of $$$$$
Hell ya bro glad to see some color on it now!
Thanks me too been hard at it.
Superior job as always what clear coat did you use being it’s yours
I was spraying Sherwin Williams at the time. great clear cc200
Looks great! Keep the content up and you'll blow up on here real quick.
Thanks for the support 👊
My goodness thats beautiful
Thank you.
Color is 🔥💥
Thanks Charlie 👍
Amazing! Nice work!
👍
Hat is off to you !!!! My friend great job now you can step back and say I did that;)
Thank you 👊
Looks amazing! You killed it as always!
Thank you 👊
That car looks sick man stunning job 👌 love it
Thanks brother 👍
wow that came out beautiful thanks for showing your awesome skills
Thank you and thanks for the support
You the man bro
Thanks for the support 👊
Wow well done
Thank you 👊
You killed it and made it look easy! The pressure of painting a true urethane kandy is immense, every step is a booby trap right up until the last coat.
How do you go about the sealer drifting into the jams as it always goes further than the base? Do you find 3 coats has enough uv holdout for the kandy?
Awesome job 👏 it must be beer time now after that big booth session
Thanks for the support 3 coats is plenty have done many over the years holds up well far as jams fine line tape as tight as possible pull fine line before fully setup carefully but some times do some touch up were needed.
@@kandyman5315
Great, thank you. I look forward to seeing it in the sun
Nice
👍
Nice work, Sam sent me.
Thanks for coming
Nice job like it 👍
Thanks 👍
Watched all videos straight after each other very mesmerising awesome very clear communication and explanation but I need to know Because the jambs are painted and cleared what do you do so no sealer or base gets sprayed in the gaps on the fresh paint? 😎 I’m almost ready to paint my first car at home
Are masked off very carefully with tape paper. Thanks for watching 👊
I wish you could pant my 1972 Oldsmobile cutlass convertible ❤️💎🏆
Absolutely gorgeous
Thank you
Man that came out SLICK
Thanks for the comments 💯
Great job man ur good 👍👌
👐👐
Brilliant work !!! came out lovely i bet your arm aches lol .
💪💪
How many quarts of Kandy did you need for the whole job? 4 coats of Kandy? Looks awesome!
I bought 8 quarts so far used 41/2 I always buy extra still have some small parts left
WOW
Beauty!!
Nice work man…
Is that similar to the Mazda Color ??
🔥🔥🔥🔥🔥
💯
Thanks
How do you keep the paint from hitting the insides of the gaps that you have already painted but mating up well?
I mask them up then fine line very carefully
@@kandyman5315 so if i understand correctly.....i tape on or very near the seam when jamming and then follow that line exactly when taping before painting the exterior? This has been boggling my mind as i prepare to paint my c10 in a new gm tint coat. (wildcherry tintcoat)
Oooooooooooooo Weeeeeeeeee! That came out nice. Are you going to cut and buff it?
Yes sir buff it soon thanks for the support
How much of the candy did you end up using on the Cutlass? It came out awesome!
Bought 8 quarts so far used around 5
Nice job you flowed with the products.Do you have to flow coat or you just need a High Solid Clear.Do like European Clears or American High Solid Clears.Nice job again i learned a few new tracks
Flo coat is not necessary if the job turns out flat hs clear 3 coats after kandy thanks for watching
Nice job, What kind of sealer it is?
P30 Sherwin Williams great stuff
@@kandyman5315 Thanks !!!
Anytime.
👏👏👏👏
what did you mix the candy with binder? and what brand of clear did you use ? looks killer
This is a UK kandy house of kolor for clear Sherwin Williams cc200
How much would a beautiful paint job cost like this on a cutlass 72
Hard to say without seeing the car .but on a car like mine 12000
Big fan where did you buy the anest iwata lpn 400
I got it from my local paint store
Lots guys say if you flow coat it shines even more im depth is that true?
What clear did u use? H.o.k show clear?
What was your fluid for the gun wide open?
Flo coats work when needed this turned out flat and clean so not needed .
What is your wall pressure?
60
1 time hit it and quit great job. So were you dustin the candy on or lil heavier than that. I'm about to do a candy Magenta on a motorcycle. And I always let my silver base dry overnight before spraying my camdy.
You should be fine with bike stuff don't dust it just take your time and watch the edges .thanks for watching
@@kandyman5315 thanks from the tips
Here from samcrac
What clearcoat did you use on it the car looks amazing I’m looking for a good clear for car I wanna keep Are used to paint 40 years ago so I’m not up on the good clears don’t want to get crazy expensive though
Sherwin Williams cc200 thanks.
@@kandyman5315 what is the price for a gallon kit of this
Around 400
What’s the name of that clear coat that you used ?
Sherwin Williams cc200
What brand of sealer are you using?
Sherwin Williams p30
Did you tac the sealer and the base coat?
Tacked the base only
@@kandyman5315 thank you!
how much was that particular job?
It is my car lol so didn't put a price on it
@@kandyman5315 understood, but what would you charge for a Kandy job like that?
10.000
@@kandyman5315 beautiful work dude..are you available for a complete?
Are you in the tampa area