I didn't have an issue with the alignment, however the eye relief is soooo short you end up with your nose on the charging handle. Looking for a full size magnifier that extends further to the rear... Other than that I liked it.
@DG-888 there are a couple other comparisons out there and those that I’ve seen the glass appear to be slightly better and the adjustments are accurate to the Holosun. However the chief complaint to the Holosun is that the Mount appears to be not as good.
Thumbnail shows the magnifier and the dot as a combo, mounted on a rifle. Video is of 2 hands fondling and fidgeting with the magnifier for 10 minutes.😂
@s0lahans, hey thanks for the sub! I’ve been using the vortex for a couple years adjustable from 0in. Lbs to a marked 55in. Lbs. (though I have adjusted past markings to get 60 not sure if one should do that haha) But recently got the wheeler set. It’s very similar to the Fix It Sticks brand but a little cheaper. Has all the common in. Lb adapters and bits, have really liked it so far! If you want the ability to cover almost all your needs. Do vortex. www.cabelas.com/shop/en/vortex-torque-wrench If you need something solid for at the range/in the field. Wheeler or Fix It Sticks www.cabelas.com/shop/en/wheeler-fat-stix-preset-torque-wrench-set
Incorrect. 7:00 YES you CAN adjust the elevation and windage turrets to center the red dot. Start with changing optic height spacers on the Sig Juliet 3 Micro, so that the Juliet magnifier lens is on the same level as the lens of your Red Dot. Then use the Turrets on the Magnifier to center the Red Dot in the Magnifier. Done. Moving the Turrets on your Magnifier does not shift the accuracy or Point of Impact of your Red Dot. Magnifier Turrets only shift the Appearance of the Red Dot relative to the center of view.
@A74568Z what I am noting is that with the Juliet micro 3 that I received the turrets would not allow me to center or adjust the magnifier to center the dot. However Sig may have fixed or corrected this issue sense receiving mine.
Nose to the charging handle cheek weld is how I was trained… no problem.
This is good stuff man. Great review. Watched till the end. Thank you!!!!
@Nicholas Ranch Thanks for view!
I didn't have an issue with the alignment, however the eye relief is soooo short you end up with your nose on the charging handle. Looking for a full size magnifier that extends further to the rear... Other than that I liked it.
Same issue I have with it.
@@J.Wick. you think holosun hm3x would be better than this magnifier?
@@DG-888 I'll have to reintroduce myself to that magnifier, but if memory serves me correct, I believe it's quite similar to this one.
Holsun manufactures that using Sigs specs
Is this magnifier better than the holosun hm3x?
@DG-888 there are a couple other comparisons out there and those that I’ve seen the glass appear to be slightly better and the adjustments are accurate to the Holosun. However the chief complaint to the Holosun is that the Mount appears to be not as good.
It’s wild that the bigger one is like 250-300 dollars more
@RyanG-ij8xq yea I can’t figure that out. I would be curious if they both come out of the same building in china?
Thumbnail shows the magnifier and the dot as a combo, mounted on a rifle. Video is of 2 hands fondling and fidgeting with the magnifier for 10 minutes.😂
Liked and subscribed 👍 what torque driver do you use? Looking for recommendations.
@s0lahans, hey thanks for the sub!
I’ve been using the vortex for a couple years adjustable from 0in. Lbs to a marked 55in. Lbs. (though I have adjusted past markings to get 60 not sure if one should do that haha) But recently got the wheeler set. It’s very similar to the Fix It Sticks brand but a little cheaper. Has all the common in. Lb adapters and bits, have really liked it so far! If you want the ability to cover almost all your needs. Do vortex. www.cabelas.com/shop/en/vortex-torque-wrench
If you need something solid for at the range/in the field. Wheeler or Fix It Sticks www.cabelas.com/shop/en/wheeler-fat-stix-preset-torque-wrench-set
Incorrect. 7:00 YES you CAN adjust the elevation and windage turrets to center the red dot.
Start with changing optic height spacers on the Sig Juliet 3 Micro, so that the Juliet magnifier lens is on the same level as the lens of your Red Dot. Then use the Turrets on the Magnifier to center the Red Dot in the Magnifier. Done. Moving the Turrets on your Magnifier does not shift the accuracy or Point of Impact of your Red Dot. Magnifier Turrets only shift the Appearance of the Red Dot relative to the center of view.
@A74568Z what I am noting is that with the Juliet micro 3 that I received the turrets would not allow me to center or adjust the magnifier to center the dot. However Sig may have fixed or corrected this issue sense receiving mine.
Where did you purchase it for that price ? New subscriber here !
@BeardedSavage
At euro optic. Here’s the link
www.eurooptic.com/Sig-Sauer-Juliet3-Micro-3x22mm-Micro-Magnifier-FDE-SOJ3M011.aspx
Stop putting lock tight on everything! It’s not necessary and it’s really geekish lol😂
I heard the same thing about the alignment issue on another review and that is going to keep me from buying it
Yea supper frustrating if you have chosen another red dot option.