Fabulous video and excellent project. No fancy nonsense, no long introduction, amd no nuseating video tricks! Just a solid project thoroughly explained. I hope I can do as well and make a little $ this season.
Finally someone put the nails in through the back! I can't tell you how many UA-camrs I've watched make these and they all put the nails in through the front... some not even using glue. Great video.
Hi, great video. You mention you give all the dimensions in the video and this is mostly true but I watched it a few times and didnt hear you give a length for the backer board. Could you tell me that dimension? Ive given you a like and will think of subscribing.
1. Cut the Back Bottom Board: -Start by cutting the back bottom board to a length of 520mm. -Make sure the ends have a 22.5-degree angle cut. 2. Prepare the Spacer Pieces: -Next, prepare spacer pieces that are 35mm wide. 3.Position the Boards: -Now, take the first board (the back bottom one with the 22.5-degree cut) and place it in position. -Use the 35mm wide spacers to evenly space the remaining 5 boards. 4.Determine the Length of the Other Boards: -Use the angled line from the 22.5-degree cut on the first board to mark and determine the correct length for the other boards. This will ensure consistent spacing and accurate cutting for your project, and hope it make sence :)
@@ErikHovedskou77Again, you fail to give any dimension for the horizontal pieces (other than the bottom one). Disappointing, as every other aspect of this project and video are first rate.
Fabulous video and excellent project. No fancy nonsense, no long introduction, amd no nuseating video tricks! Just a solid project thoroughly explained. I hope I can do as well and make a little $ this season.
Thank you very much 👍 and of cause you can build it.
I am working on a new Christmas tree and hope to have the video ready soon
I made one and it turned out great, thanks.
Thank you for sharing! It means a lot to hear that you enjoyed the project!
Great project and video! Thanks for sharing, will definitely build this!
@@digismurf thank you 👍 and have fun
Finally someone put the nails in through the back! I can't tell you how many UA-camrs I've watched make these and they all put the nails in through the front... some not even using glue. Great video.
Well thank you, I think it looks way better when you can't see the nails
Excelente trabajo. Saludos desde Maturin Venezuela 🇻🇪
Thank you very much👌
Nice work and thanks for sharing. Got to make this
You are welcome 👍
Great job as usual 😊
Thank you very much 👍
Very nice. Thanks heaps.
I'm glad you liked it! Your support means a lot to me.
Cool project, thanks for sharing. Full View and Like..
No problem, and thanks 👍👌
Would good results be achievable with just hand tools?
Sure, I think that would be ok. you just need a bit more sanding
Looks good. Playing around with the drawings on Etsy but they never seem to convert to US dollars at checkout. Where am I going wrong? JimE
Thanks Jim, can't help you there, but think it is around 9USD
There should be a deal on there as well.. Get 3 sets of drawing save 25%
ser godt ud 👍 er det egetræ du bruger ?
Ja det er egetræ fra en gammel bordplade, men har lavet nogle i bøg også👍
Hi, great video. You mention you give all the dimensions in the video and this is mostly true but I watched it a few times and didnt hear you give a length for the backer board. Could you tell me that dimension? Ive given you a like and will think of subscribing.
1. Cut the Back Bottom Board:
-Start by cutting the back bottom board to a length of 520mm.
-Make sure the ends have a 22.5-degree angle cut.
2. Prepare the Spacer Pieces:
-Next, prepare spacer pieces that are 35mm wide.
3.Position the Boards:
-Now, take the first board (the back bottom one with the 22.5-degree cut) and place it in position.
-Use the 35mm wide spacers to evenly space the remaining 5 boards.
4.Determine the Length of the Other Boards:
-Use the angled line from the 22.5-degree cut on the first board to mark and determine the correct length for the other boards.
This will ensure consistent spacing and accurate cutting for your project, and hope it make sence :)
@@ErikHovedskou77Again, you fail to give any dimension for the horizontal pieces (other than the bottom one). Disappointing, as every other aspect of this project and video are first rate.
Turns out to 8.19 United States Dollar
Yes
Ok woodwork we need new wood working projects. These are 3 or more year old projects.
You are right, but they are god ones 👍
I will try to come up with something new 👌
Have you made any trees or are you just watching
I have made 2 of this one👍