8.30.24 Bryan, great to see you riding again. How’s the finger, back to full function? Going to do any racing? To bad for the water leak. At least the Varg warns you before any further damage.
Finger is not full normal function yet but probably 80% range of motion and doesnt hold me back anymore. Just gets sore after a long day of riding. Would like to do some racing
THD- Total Harmonic Distortion. (The Lower % the better.) Not sure if you asked anyone, you should have. if you would have done a bit of research you would have found that any sensitive electronics do not like a standard non inverter genset. A 5000w or above with 240v capability inverter with a lot THD will have a pure sine wave. Basically mimic grid power. 👍 lots of Chonda powered units are good and cheap. Genmax open frame inverter 6500w. (
Make sure the genny is outputting power at 50-60hz by adjusting the rpm under full load, usually via the governor screw. That was my problem with my non inverter genny.
Does it's "water pump error"? When it pops up? Mines been saying "cooling fan error" but I hear it could be the pump.. Got a replacement fan and installed it. Waiting for a new vcu to get the bike to turn on...
Glad to see you are at it again!
8.30.24 Bryan, great to see you riding again. How’s the finger, back to full function? Going to do any racing? To bad for the water leak. At least the Varg warns you before any further damage.
Finger is not full normal function yet but probably 80% range of motion and doesnt hold me back anymore. Just gets sore after a long day of riding.
Would like to do some racing
Heeeyyy me over there on the step up on the kawi seen you rip man fast, couldn’t hear ya coming 😂
some say i'm faster than the speed of sound :D
@@bwhaskell 😂
Track looks fun.
It looks like it was not so much an "error" as it was accurately warning you of a mechanical problem (leaky radiator)?
Right, it shows up as an error on the display. Seems to be triggered when the coolant level is too low, which in my case was due to radiator leak.
Hey Bryan how many hours do you have on your varg now ? I’ve done 30 on mine since Feb I’m sure you have a lot more than that ??
What problems were you having with the bike? I bought a durostar genny. will not charge on the 240v plug. Been looking at inverter generators.
THD- Total Harmonic Distortion. (The Lower % the better.)
Not sure if you asked anyone, you should have.
if you would have done a bit of research you would have found that any sensitive electronics do not like a standard non inverter genset.
A 5000w or above with 240v capability inverter with a lot THD will have a pure sine wave. Basically mimic grid power.
👍 lots of Chonda powered units are good and cheap.
Genmax open frame inverter 6500w. (
Make sure the genny is outputting power at 50-60hz by adjusting the rpm under full load, usually via the governor screw. That was my problem with my non inverter genny.
How did the hole get in the radiator?
Yeah it's leaking from the mountng posts on the radiator. Waiting for Stark to send me a replacement
@@bwhaskell Get the radiator repaired for now.
@@jippy222 that would be...rad.
Does it's "water pump error"? When it pops up? Mines been saying "cooling fan error" but I hear it could be the pump.. Got a replacement fan and installed it. Waiting for a new vcu to get the bike to turn on...
Yup water pump error
Have you seen cracks on suspension mounts or foot peg mounts
None of that so far
is the line on that switchback really the inside bump both times?
I would say it depends on how the ruts shape up. Second one the outside is probably faster
⚡⚡⚡
Gas generator or solar panel,or wind power?
Gas for now but I'm putting a large 15kwh battery bank in my sprinter soon and will charge the electric bikes off that.