How to Make an Altimeter for a Flight Simulator with MobiFlight | Captain Bob
Вставка
- Опубліковано 17 лис 2019
- Today we will make an Altimeter for a Flight Simulator. I am using FSX for this video. I will show how to use MobiFlight with X-Plane in a future video.
📌Download MobiFlight Here: www.mobiflight.com/
📌3D Printed Files: www.thingiverse.com/thing:274...
📌Alvaro Alea's Design Page (Not me): www.thingiverse.com/alvaroale...
📌How to install MobiFlight: • How to Install MobiFli...
📌Stepper Motor to MobiFlight: • How to use a Stepper M...
📌Encoder to MobiFlight: • How to Connect an Enco...
📦 Brass (copper also works) Pipes: (Order 3MM, 4MM and 5MM outer diameter): ebay.us/FrLh0G or ebay.us/SjJypc these just have to telescope, and slide easily.
📦Arduino Mega: ebay.us/6OCrco
📦12V Power Supply for Arduino: ebay.us/Htl86R or ebay.us/S1NXTS
📦Stepper Motor: ebay.us/aS1yyZ
📦Rotary Encoders: ebay.us/gOto3E or ebay.us/UIcAs6
📦1kg 1.75mm PLA Filament: ebay.us/JBLjNO or ebay.us/jKJnAz
📦Ender 3/Pro: ebay.us/wFoKhs or ebay.us/sT0Vg5 or ebay.us/ZDF5V2
📦Jumper Wires: ebay.us/kH8k89 or ebay.us/xVu5KF
📦24 AWG Wire: ebay.us/XCbsal or ebay.us/R5Qyqg'
▶ Become a Patreon! / captainbobsim
▶ Join our Discord! / discord
▶ Consider making a donation to improve video quality and fund my Flight Training: www.paypal.com/cgi-bin/webscr...
▶ I have Instagram! Follow @CaptainBobSim for a little bit of behind the scenes.
* * * * *
Disclaimer: I'm a human that makes mistakes. Fortunately, we can learn from them. You are responsible for your safety. As an eBay Associate I earn from qualifying purchases. Sale price is not affected. I use time lapses to shorten the video. To avoid injury and/or death please do not try to match the speed shown in the video. - Наука та технологія
Hello Everyone! I did not make this very clear, but I did not design these files. The author is here: www.thingiverse.com/alvaroalea/designs
Have a great day!
Late find, but glad I did. Awesome work young man !! Keep it up !!
Thank you, I'm glad you enjoyed it!
I have just started building my Cessna C172 home cockpit and I almost finished the radio panel. Great tutorial. Subscribed!
Awesome, Good luck with your simulator!
I must say... I was truly intrigued by your video. Well done my friend.
Thanks! I'm glad it found you.
You're Briliant !!! The most usefull tutorial on UA-cam. You've just got +1 Subscriber
Thank you so much! That means a lot :)
Thanks my friend you are the best, you inspired me to improve my home sim, I was using monitor with bezel through Air Manager, but with your videos I am moving next level, thanks again!!
That is very cool, GarageSim! :D
great job with those indicators! i REALLY need live instruments in my cockpit!!
Thank you! Yes, live instrumets are very fun to have!
Nice work Captain Bob! Appreciate you sharing how you made everything. I did see where another make actually printed a transparency with the same as the paper and laminated the two to get a glossy finish on the dial. I really am impressed by how you came up with the gear-ratios and clockwork! Subscribed!
Thanks! I didn't design this, but I thought a construction video would be helpful, here is the designer's thingiverse: www.thingiverse.com/alvaroalea/designs
Have a great day!
@@CaptainBobSim Well, you still did great and I enjoy your videos. Thanks for the links and you also "Have a Great Day!"
Very Nice! I used this video to make my own altimeter for my flight simulator! Very Helpful!!
Glad it helped! I'd love to see a picture 😁
Thanks Trevor for the stepper motor info.. I'll order the controller boards as well :)
Excellent! I hope you have a blast building it! As a heads up the old Attitude indicator instead uses 9g servos and this altimeter only uses one motor (I gave specs for the new versions)
Fantastic, congratulations. I am from Brazil and I am setting up a Cessna 172 Simulator totally following your videos.
Thanks, That's so awesome, good luck with your simulator and have a nice day!
Once again excellent work Capt.
Thank you!
nice work buddy. Agree with Dank below your videos are very informative. Keep it up ! Out of interest, how do you communicate the multiple instruments off the single mega arduino with limited ground and 5V ports?
You can either, Twist the wires together, Solder the ends together or use a breadboard's positive and negative rails.
Once again it’s me in quarantine watching ur intro on 100% volume in a giant speaker on loop for 9 hours a day
That's so awesome, enjoy the rest of your quarantine!
Captain Bob - Flight Simulation Made Simple hey bro idk I guess I’m not the smartest but is there and easier way to do this?😂
@@deadwillytv6528 Hmm, I guess you could use a Saitek instrument for the altimeter.
Wow... Nice work
Thank you! Cheers!
I just loved your intro
I’m so glad you liked it!
Favoloso.
Bravo!
Thank you Franck!
U should promote your channel. Its really helpful and extremely underrated.e
Thank you so much. That means a lot. I'll take your advice :)
Good job. Thanks.
You are welcome :)
Awesome
Thanks :)
Excelent as ever, you can tweak 2 or 3 steps to archeve exact 10000ft .
Thank you! I will have to tweak this some more :)
I had this exact wallpaper for years ah ah
hi nice video thanks to your tutorials i learned to program mega boards, i want to know if it is possible to connect two mega board to mobiflight
Hello!
It is possible to connect multiple arduinos to MobiFlight.
Good luck with your sim!
Just saw that MobiFlight is a German company. Why not connecting with him? You have great tutorials. It's a bt help for so many guys.
Thanks. I am in contact with Sebastian from MobiFlight.
Inspired by these videos (thanks) I begun to build an oil pressure/temperature gauge (Two needles). I'm using Mobiflight + Arduino Mega + L293D Shield to connect two X27-589 steppers. The steppers are connected to the shield and I do not know which pins are used. How can I do to set Mobiflight right when it asks for the pins? Thank for your help.
Good Afternoon NetoTrabanino,
I haven't worked much with the x27 stepper motors or the L293D Shield yet, so I don't think I could be of much help. I think you might find more help on the MobiFlight Forum at www.mobiflight.com/
You could also refer to my Stepper Motor video if it's a question about the MobiFlight process.
Hopefully this helps!
@@CaptainBobSim . Thanks Captain Bob for your answer. I found out it doesn't work with Mobiflight, instead, I switched to Step Motor 28BYJ-48 and it works perfectly. It's finish and now I'm working on the Altimeter. But here I had to make some adaptations to fit my needs. (Resizing to match my others gauges, a front transparent glass, extra holes to attach to the panel, axes sizes, extra base to fit the Stepper Driver board, etc). Thanks
Beautiful realization.
But how do you reset the altimeter between two simulations? When it was stopped at any altitude.
Between sessions, it should return to zero (which is a little bit painful when my home airport is thousands of feet AGL) unless MobiFlight crashes. If MobiFlight does crash you will have to recalibrate it manually, or cheat by unplugging it when it reaches roughly the right altitude, and closing MobiFlight. It might also be helpful to have another row for testing the stepper motor (no FSUIPC Value) and use the test function to recalibrate.
made this in my electronics class. Nice tutorial, but it sure was a pain to find that diameter of tubing lol.
Hallo,
the Arduino Mega is expansiv.
if a soluion awaileble for arduino nano or AT Tyni with digispark?
Mobiflight supports the Arduino Mega, Arduino Mega Pro Mini, Arduino Pro Micro no others are fully compatible as of now
Good job!! Where did you learn all of these stuff??
Thank you Mario! I learned this from exploring YouTubing on how electronics work, reading forums, experimenting and a lot of failing :)
@@CaptainBobSim Awesome man! I added you on insta @emecreativelab.check my setup and let me know your thoughts
Very impressive. Great work. I would like to use steppers in my designs. Do you know how to program them in Mobi for xplane? That would be of great help to me for the zibo. Thanks and keep up the great work.
Just use the X-Plane feature instead of an FSUIPC offset. If Altitude is different from Zibo you'll need to change one of the filters from laminar to zibo
@@CaptainBobSim Thanks bud. I would show you my gauges but I have no way of posting here.
You should email me a picture! CaptainBobSim@gmail.com :)
Do you happen to have the images in better detail to print?
I do not, I'm sorry. I'd go into GIMP, Inkscape or Canva to make better ones.
Hi Trevor. I made this some time ago and have just converted it to use the X27 steppers. The problem is I cant seam to program the stepper to show correctly. Using MSFS2020 and mobieflight 'Plane ALT above ground" as the sim variable. If this is the wrong place to post this then so sorry
This should read the ZGA12 stepper that I got from aliiexpress. 1;63 ratio and it says 1260 pulse per 360deg
Use "Indicated Altitude" instead
@@CaptainBobSim Thank you. Sort of got it going now
Wouldn't it be easier and more precise to have a separate motor for each needle? But probably that's not supported by the software right?
SimVim does it this way, and I'm sure you could write an expression to have it this way but I didn't want to design it for myself so I used Alvaro Alea's :)
Captain Bob, This is Neto Trabanino again. I switched to MSFS2020. Could you give me a hand to code an Altimeter ( one stepper) in MSFS2020 in my Mobiflight version 9.6.0. From Extras menu, I already downloaded WASAM module and downloaded the latest HUBHOB Events. I run the Firmware again and I have been trying diferents codes without success. In the section 'Sim Variables' I selected SimConnect(MSF2020) 🤥
How difficult would it be to convert a real altitude indicator to simulator?
It would mostly be a mechanical project, difficulty would depend on the model of the altimeter. I've worked with one before, it took a lot of experimentation but was doable
Now that you have a new design, are you going to show how its put together? I've got about 90% of it figured out, but I feel like I am missing something.
I saw your GitHub message :) I'm still prototyping it - the video will come after the VSI Video.
It takes a lot of work to take it from meh to 👍, especially with school so I can't promise a date. What's the last 10% you need? Is there anything you think needs improvement?
Hi i had luck with buyng cheap chinese usb fans so now my both 2 usb ports ar dead wich means that i cant connect anything to my front usb ports
If you still have back ports, you could run a USB hub from them. I wouldn't know how to fix this.
Hopefully these videos might help:
ua-cam.com/video/nKD-t5zMhPg/v-deo.html
ua-cam.com/video/jiYTQGHQqCg/v-deo.html
@@CaptainBobSim thanks i hope they can help
No big deal, but the tubing is brass, but the description says copper. ;)
Whoops! Not a problem with my new design though 😂
I fixed this in the description
I hate 3d printed parts, because where I am, it is very difficult and expensive. But i love all the other stuffs on the channel
Yes, they are very expensive some places. Have a great day!
Arduino code
Good idea but hot glue?!?! Seriously? For 2 weeks?
Right?!