Thanks for the tips. my washer top load (samsung aquajet vrt Model:WA456) was leaking water as well. I tilt it to check if i had the same problem unfortunately it was not. I thought maybe I placed the drain tube to far deep but that wasn't it either. kept scratching my head. I finally open it from the back. Long and behold there was a clear thin tube that was disconnected from the tank, mid right area. I attached it. conducted a test Rinse/Spin and voila! works. Saved myself a few bucks. I comment my faults just incase someone has the same issue. Hope it helps.
@@chivondawilliams9280 I’m glad it helped. Overtime it kept pulling off and I wonder what it may be that’s pulling off. I took a guess and a risk on a thought and i ended up ordering this from Amazon. It was an easy replacement installation and since then I haven’t have any issues with my washer. Just in case you continue to have that issue. This was my second fix. Brand: Owigift 4PC Washer Suspension Rod Damper Replaces For Samsung.
If you just trim off the end of the tube and put it back on you shouldn't have to replace the whole tube the tube end itself can stretch over time and that's why it keeps coming off unless its too short for some reason and if that is the case you can 1/8 vacuum hose at the auto parts store and cut to length and it also works
This video helped me a lot. Looked under machine and sure enough had same exact problem. Guess should have known something like that because it was a major leak.
UPDATE: Guess what? My leak from the bottom wasn’t from the machine at all! It is from the plumbing drain line that leads to the sump pump. So check the plumbing line too. My machine only leaks when it drains.
Ours started leaking after 3 years. The company that handles our warranty is 150 miles away. They sent a guy out to fix ours. He replaced the pump and checked other things then left. It leaks as bad as it did before he worked on it. Is there anything else to check? The company in little Rock claims there's no way its leaking and want $350 to fix it under warranty
@@Fasteddiesinhomerepair I have the exact same problem as shown in these two videos ua-cam.com/video/6gdlcay4Je8/v-deo.html or ua-cam.com/video/iwNlBpG4U_8/v-deo.html, some little hose with a little clamp came loose. Apparently it's happend to hundreds of people. I re-connected it, but don't know how to test it, afraid to cause another flood. Is there some sort of a test mode? It never finished washing the clothes that was in there, I took them all out wet and soapy...
@@rsmolkin ok so cut the end off that has the old shape so you have a fresh connection put back on and put the clamp back on done As far as a guarantee there's none of those in like and this is nothing new it's been happening on all washer since they have have been filling automatically just trim the loose warped end and go on your way the only other thing is if its to tight or getting pulled if that happens just replace with automotive vacuum line of similar size but cut to length
We have to replace this assembly on our washer. There are NO repairman that will work on it in our area. What is this part called? We haven't been able to find a part like it so far. Thank you
My washing mashing keeps giving a 4C code I have took all the hoses off clean the filters and it still does it now it is leaking from the bottom don’t know if something came loose well we were moving it around trying to fix it
I had to get use to it- now I do almost all loads on the bedding setting so there’s water 💦. That’s helped but of course now it’s leaking from the front. Gonna try this solution hopefully it works.
Thanks for the tips. my washer top load (samsung aquajet vrt Model:WA456) was leaking water as well. I tilt it to check if i had the same problem unfortunately it was not. I thought maybe I placed the drain tube to far deep but that wasn't it either. kept scratching my head. I finally open it from the back. Long and behold there was a clear thin tube that was disconnected from the tank, mid right area. I attached it. conducted a test Rinse/Spin and voila! works. Saved myself a few bucks. I comment my faults just incase someone has the same issue. Hope it helps.
Omg! Thank you for this! This was my issue too! Just did it! Thank you and now my washer is back running! 🙌🏾
@@chivondawilliams9280 I’m glad it helped. Overtime it kept pulling off and I wonder what it may be that’s pulling off. I took a guess and a risk on a thought and i ended up
ordering this from Amazon. It was an easy replacement installation and since then I haven’t have any issues with my washer. Just in case you continue to have that issue. This was my second fix.
Brand: Owigift
4PC Washer Suspension Rod Damper Replaces For Samsung.
@@h3nd4wg53 thank you so much!
If you just trim off the end of the tube and put it back on you shouldn't have to replace the whole tube the tube end itself can stretch over time and that's why it keeps coming off unless its too short for some reason and if that is the case you can 1/8 vacuum hose at the auto parts store and cut to length and it also works
Didn’t know Bane fixed washers
I have the same issue with a glass top brand new washer. Its only two months old!!! This video was very helpful!! Thanks!!👍👍
Loved the video! Going to tilt mine back to check it out. Really enjoy how you got right to it and was very concise! Thumbs way up!
Thanks man...I need to look at mine today. Good to see someone on the Tulsa area.
This video helped me a lot. Looked under machine and sure enough had same exact problem. Guess should have known something like that because it was a major leak.
UPDATE: Guess what? My leak from the bottom wasn’t from the machine at all! It is from the plumbing drain line that leads to the sump pump. So check the plumbing line too. My machine only leaks when it drains.
Thanks. This was made an easy fix because of your video!
Excellent video!
Thanks for making this video
Ours started leaking after 3 years. The company that handles our warranty is 150 miles away. They sent a guy out to fix ours. He replaced the pump and checked other things then left. It leaks as bad as it did before he worked on it. Is there anything else to check? The company in little Rock claims there's no way its leaking and want $350 to fix it under warranty
Now I know what it would sound like if Walter Sobchak was repairing a washer.
So is everything work properly now. Ours started leaking as well. Our warranty just expired, go figure.
Same issue here. Added a fuel line clamp so it's not coming off again.
Good to know I think I would've clean that glass off for the customer so they could see through it! :)
Is it worth trying to repair or just replace the whole machine?
Really depends on the repair and if your doing it yourself
@@Fasteddiesinhomerepair I have the exact same problem as shown in these two videos ua-cam.com/video/6gdlcay4Je8/v-deo.html or ua-cam.com/video/iwNlBpG4U_8/v-deo.html, some little hose with a little clamp came loose. Apparently it's happend to hundreds of people. I re-connected it, but don't know how to test it, afraid to cause another flood. Is there some sort of a test mode? It never finished washing the clothes that was in there, I took them all out wet and soapy...
@@rsmolkin ok so cut the end off that has the old shape so you have a fresh connection put back on and put the clamp back on done
As far as a guarantee there's none of those in like and this is nothing new it's been happening on all washer since they have have been filling automatically just trim the loose warped end and go on your way the only other thing is if its to tight or getting pulled if that happens just replace with automotive vacuum line of similar size but cut to length
Mine is saying EF but screens arnt plugged, water coming out of bottom, it washed but wont rinse, what do you feel is wrong it's only 5 years old
All I heard was mumbling with volume up full.
I saw the whole problem in the thumbnail….. (it’s a Samsung)
Context pls
@@ArgoNation33 it’s a joke. Samsung makes the worst appliances sold in the us. The comment was a joke
thanks alot i fixed mine
Gonna try this 👍
We have to replace this assembly on our washer. There are NO repairman that will work on it in our area. What is this part called? We haven't been able to find a part like it so far. Thank you
My washing mashing keeps giving a 4C code I have took all the hoses off clean the filters and it still does it now it is leaking from the bottom don’t know if something came loose well we were moving it around trying to fix it
I have the exact same issue
how to fix a tub seal
This is my exact model with the exact same problem. Samsung sucks.
M.I.B.
This is the worst washer. Do not recommend at all.
No its not the GE GTW models are by far the worst washer ever made
I had to get use to it- now I do almost all loads on the bedding setting so there’s water 💦. That’s helped but of course now it’s leaking from the front. Gonna try this solution hopefully it works.