I appreciate the video mate. I have a 07 solstice and someone scratched my soft top with a key it would seem and now it has swirl marks all over and I'm looking to get it replaced and this video helped a bunch.
Could you do a video on the removal of the outside fender panel just in front of the door, I can't get to that phillips screw on the back side without scratching the door
You put out great videos! I have a question: if the top door flap plastic clips are broken, can the glove button not work or engage the release of the top and trunk? the relay is good and the rest of the cable attachments look good, except those clips. Any advice?
I am looking for a new top for a satin. Roadstop 2000 eigit need a tan top. I cannot find when would you be able to help me? The right directions to get That Would Be Great.
@WhoDatNation69 Open the door, but not quite all the way , then use long extensions on a ratchet with a universal joint attachment. It allows the drive to get to the bolts and turn. Before you do anything use painters tape to mark the current location of the fender, so when you put it back on you have something to align with.
Guys, if you would have shut the doors before you lifted the top you could have walked the top over the front hood and not set it on the rear panel for the moment while the helper came around. Maybe next time. Or at least have a cover on the rear panel.
I would love to see the actual canvas top replacement as well as reinstall. Great video!
I would like to know how to remove the canvas from the top. I need to repair a portion of it.
Same. Follow up video would be great.
what is a good source for after market hard tops?
Great video - I feel confident enough to give it a try :-)
I appreciate the video mate. I have a 07 solstice and someone scratched my soft top with a key it would seem and now it has swirl marks all over and I'm looking to get it replaced and this video helped a bunch.
Very helpful. Thanks a bunch!
RIP Headphone users @ 4:16 mark ROTFL!
Phenomenal video sir. THANK YOU
Can you show how to replace the tulip door on the solstice?
Could you do a video on the removal of the outside fender panel just in front of the door, I can't get to that phillips screw on the back side without scratching the door
GREAT and clear video! Do you have any videos on how to remove the TULIPS to either repair or replace them please?
Nice video of removal. Now, could you do a video of an install of a soft top? Please include any alignment procedures... THX.
Was thinking this was just putting the top down, but thank you anyway haha!
Please teach me how to replace the tulip door.
i would like to see a 2016 for mustang convertible top removal process please.
Great video. Thanks
You put out great videos! I have a question: if the top door flap plastic clips are broken, can the glove button not work or engage the release of the top and trunk? the relay is good and the rest of the cable attachments look good, except those clips. Any advice?
Do the two back posts pop out of the rear bonnet when you push the button in the truck?
Where can I get the cable on the driver's side. The one on my Solstice broke.
I am looking for a new top for a satin. Roadstop 2000 eigit need a tan top. I cannot find when would you be able to help me? The right directions to get That Would Be Great.
How do u replace the passengers door window actuator on a 2007 sky
My trunk won't stay open the hydraulics just drop when I open trunk. What can I do to fix problem? 😕
A job I suspect I'll never have to do. Good stuff regardless.
Thank you!
both electric connections seemed to have fused/rusted together at the metal contact points. may have to cut wires? will try wd40.
what is the cost for soft top and hard top replacement?
I know it's 4 years ago but I'd like to see something about the locking mechanism mine doesn't want to close completely
Can someone tell me how to get the front side fenders off the bolts be behind the door I'm completely lost on how to get to
@WhoDatNation69 Open the door, but not quite all the way , then use long extensions on a ratchet with a universal joint attachment. It allows the drive to get to the bolts and turn. Before you do anything use painters tape to mark the current location of the fender, so when you put it back on you have something to align with.
Awesome video! Thank you. Would love to see
1) replacing canvas material and reinstalling
&
2) replacing soft top cable to lift door
Pontiac Solstice soft top rear window water leaking, repair.
I have a 2008 redline.
How to install a pontiac solstice soft top
Guys, if you would have shut the doors before you lifted the top you could have walked the top over the front hood and not set it on the rear panel for the moment while the helper came around. Maybe next time. Or at least have a cover on the rear panel.
Glove compartment trunk button does not work