How to change rear brake discs on TOYOTA AURIS 1 TUTORIAL | AUTODOC

Поділитися
Вставка
  • Опубліковано 27 бер 2017
  • How to change rear brake discs / rear brake rotors / rear disc brakes on TOYOTA AURIS 1 TUTORIAL | AUTODOC
    Top brands that produce brake discs: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
    📲 Buying via app is always cheaper than on the website!
    ❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
    On our website you will find a wide range of auto parts you are interested in: goo.gl/rEtv33
    Brake discs: goo.gl/7Ai6SE
    Brake discs for TOYOTA: goo.gl/x6lO5S
    Brake discs for TOYOTA AURIS 1: goo.gl/dvsPzb
    TOYOTA Car parts: goo.gl/7fxLxi
    Mobile Shop: m.autodoc.co.uk
    ► TOYOTA AURIS 1 car repair tutorial | Step-by-step video guide - • TOYOTA AURIS car repai...
    ► How to replace front stabilizer bushes on TOYOTA AURIS 1 - • How to change front st...
    ► How to replace front brake discs and front brake pads on TOYOTA AURIS 1 - • How to change front br...
    📢 AutoDoc in social media:
    Facebook: / autodoc.co.uk
    Twitter: / autodoc_berlin
    UA-cam: / autodocuk
    Instagram: / autodoc_autoparts
    #autodoc #autodoctutorial
    Disclaimer:
    This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
    ⚡ AUTODOC CLUB - club.autodoc.co.uk
    Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
    ❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
  • Авто та транспорт

КОМЕНТАРІ • 21

  • @danieldoherty8009
    @danieldoherty8009 Рік тому +2

    You should have a video on how to replace the rear axle ,cause they all rot after a few years .

    • @autodocuk
      @autodocuk  Рік тому

      Thanks for the clarification, we'll think about what we can do with this in new videos.

  • @miasoculpa8490
    @miasoculpa8490 3 роки тому +1

    why remove ebrake cable if not changing caliper

  • @kevincarr3722
    @kevincarr3722 3 роки тому +7

    Lets leave the old pads on to ruin the new discs, amateur

    • @Phonxer
      @Phonxer 2 роки тому

      Why change the pads if they are good?

    • @wellifthemediasaysit
      @wellifthemediasaysit 2 роки тому

      @@Phonxer every brake disc set comes with new pads!

  • @zXLuke4efcXz
    @zXLuke4efcXz 6 років тому +1

    Yes let's put on some discs without cleaning them of all the oil first. Good idea!

    • @autodocuk
      @autodocuk  6 років тому +2

      Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, so some stages of the repairs might have been excluded. Best regards, Autodoc.

    • @billblue1
      @billblue1 6 років тому

      Pity you can not spell disc

    • @TerjeNormann
      @TerjeNormann 3 роки тому +3

      @@autodocuk Dont you see the risk of misleading peoples to do it wrong when you dont add the entire operation and information?
      Like... You always have to clean storage oil from discs?
      Dangerous situations can occur if not.
      In almoust all cases you change discs because they are worn.
      Then also the pads is worn.
      You never put new disc on without replacing pads.
      When you replace discs and pads, you need to push in brake pistons to get the caliper back on.
      You should show how to do that correctly.
      Dount put other people in risk of danger by doing it wrong because of misleading or lack of important information.

  • @gsx44
    @gsx44 5 років тому +1

    Didnt have to press in brake caliper piston!? Guess not if u change from new to another new disc

    • @autodocuk
      @autodocuk  5 років тому +4

      Thank you for the feedback! Unfortunately, we didn't consider this procedure, but our new videos will show this replacement in more details. Best regards, Autodoc.

    • @TheThejpmshow
      @TheThejpmshow Рік тому +1

      On the Auris it’s a piston that needs rewinding, requiring a special tool

    • @TheThejpmshow
      @TheThejpmshow Рік тому

      Just done it today. Watched this video for a bit of a refresher

  • @danieldoherty8009
    @danieldoherty8009 Рік тому +1

    Pads should have been changed to ,

    • @autodocuk
      @autodocuk  Рік тому

      Yes, it is advisable to fit new brake pads when replacing the discs.

  • @gasgiant7122
    @gasgiant7122 6 років тому +5

    Good video but not a very good advertisement for your business, no degreaser? And just as important NO torque wrench??? WTF you guys could kill someone!

    • @autodocuk
      @autodocuk  6 років тому +3

      Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, without going into all the technical nuances. Best regards, Autodoc.

    • @oisinkirk9249
      @oisinkirk9249 6 років тому +1

      Gasgiant I’m no mechanic so I’m asking you , what’s the torque wrench for ??

    • @TheUnderGround979
      @TheUnderGround979 3 роки тому

      @@oisinkirk9249 I use the German torque wrench it's called gutten tight.

  • @richardking6066
    @richardking6066 3 роки тому +1

    Seems to be a pointless video, as it certainly does not show how to safely do the whole job!! Beware!!