Marshall DSL 1 Watt Head
Вставка
- Опубліковано 2 чер 2024
- Here are some other cool products from a dealer I trust and buy from online
imp.i114863.net/c/2224555/791...
You can support what I do and show you Know Your Gear.
Get your T shirt
teespring.com/stores/know-you...
Become a Patron member
/ phillipmcknightkyg
Facebook
/ knowyourgear
Instagram
/ phillip_mcknight
What do the Icons on my videos mean? • Video - Фільми й анімація
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
That clean channel is so bright, it's a felony in 38 states and Puerto Rico to play a Telecaster through that amp.
Hahaha
Only red states
What's the joke here?
@@boofert.washington2499 Telecasters are very bright instruments
this is too bright and the Blackstar HT1 is too boomy :( Why can't they get it right?
One thing I love about your channel is how simple it is. When you show the tones you don't put double bass blast beats that overwhelm the guitar tone that I came for. You show just simple riffs and licks that show the tone and not some crazy sweep picking bs that just shows your playing and not the amp.
Your channel is the best
Keesen Gripp completely agree. Just want to hear what the amp can do. No bs from Phil and not in anyone’s pocket.
Your channel is simple, on point, and most importantly, you are humble. Thank you sir.
I had to have the 5c right when it came out ~4 years ago. I love it. It sounds perfect. I just purchased the 20 watt head you are referring to and find it a little fizzy/trebley. I think the difference is that they have presence controls. The thing with Marshall amps (tube) is that they crave volume. Lower treble + volume = good sounding Marshall.
I literally went “Oh!!” when you started playing on the clean channel.
I actually love how bright it sounds. I really like that clean.
Thank you for always giving no B/S reviews!! After watching your videos I walk away understanding what it is and what it will do. You just give your honest option. I don't feel I can get that anywhere else. I am subscribing today🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻
As always, a good video with an honest evaluation and great information. Thank you sir and keep it up
well, i bought one and with a palmer cab with a celestion 12" neo creamback 16ohm 60 watt speaker and it is amazing, not to bright but just right in de clean channel, so the speaker is really important, even the deepswith gives a very nice blues tones for the clean channel, for the gain channel it was even searching for the sweet spot but there also 100% marshall, i recomended this for home use any day for the money
Thank you for this video Phillip! You are the best!
I’ve got the DSL1 Combo, I love it. The clean channel is a bit bright but the guitar you use makes a big difference. My strat sounds amazing in the clean but not so much on the dirty. My DOT and Ibanez jerking (P90’s) sounds really good on the dirty channel especially the humbuckers in the DOT.
Thanks for the review Phillip! I am relieved to hear it can be ran through a 2x12. I was afraid to try it. I am in agreement, it's a cool practice amp, all tube Marshall. Exactly what I've been wanting. I don't care for the clean channel either. It's fun on the red channel though.
Yeah i'm with youon this amp Phil, I have had this amp for about 6months as my late nighter, and recently picked up a blackstar ht1r to use instead. If I had to recommend between the two based on tone the blackstar would be my recommendation even though it has no footswitch jack or effects loop. Drive is easy enough to control with guitar volume. That being said tone as you know is subjective.
Thanks for the review! Cool option, but going by the sound clips, I'll stick with my Orange #4 (which sounds awesome through a Suhr reactive loadbox and a Twonotes CAB). Thanks again for the demo!
Being an owner of the original JCM 2000 DSL1 I was curious to hear the differences between the two. Wow! It is bright on the clean channel. I would have to agree with you Phil, to much for my tastes (I use 2 2x12 cabs with Celestion G12 50s) and use the clean channel with a few different dirt pedals (a Timmy and a Keeley Red Dirt mini) and it’s great. Basically making it a four channel amp. Like you though I wish that it had reverb as well. I’ve been using a MXR Carbon Copy delay in the effects loop to get a slight echo that seems to work well for my needs.
The dirty channel still sounds pretty much like the original. I run mine with the gain backed down to about 10oclock, everything else around noon.
Most of my guitars have low to medium output humbuckers, so this seems to work quite well for a nice dirty sound and cleans up fairly good when rolling the volume off on the guitar. I use the deep switch and run the mid cut switch in. I’ve notice that I get a pretty good jump in volume when I disengage the mid cut switch, I don’t know if this is due to the cut in the mid frequency or just inherent to the amp itself.
This is my main amp that I play with at home at night on the .1 watt setting as it’s not to loud to be offensive to the family and still gives me a nice tone. Something I’m unable to do with my higher wattage amps.
Thanks for the review Phil! As always good and to the point.
I have the DSL 1 combo. I love the clean being as bright as it is if I need it darker i just roll off on the treble.
What guitar do you use 🤔
Agreed , the low different strokes for different folks plays in 🤷🏻♂️
I know lol. I love my DSL1HR. It’s not even that bright. Turn down the treble if you need to I guess.
You really weren't lying when you said bright. Yikes
Marshall come from a time when the backline cutting through the stage-sound was a really important thing. Most guitarists haven't even noticed that things have evolved considerably since then.
It's like back in the 60's they were still building stages with a rake; evolution takes time I guess.
I bought this amp and use a 2X12 cab at 16 ohms. I love the sound and play out with it. I just mic it with an SM57. But it is quite loud alone.
Yep that amp sounds like it wants an EQ (preferably parametric) in the Loop. It sounds really bright no matter the channel.
I’ve recently bought one of these and I’m very happy with it for home use. I emailed Marshall because the volume on the emulated line out was much lower than the speaker. The replied and said they have an update to the emulated line out and arranged for it to be collected and upgraded FOC. Not sure about it being compatible with an 8 ohm load, both the amp and manual say 16 ohm only, I’m no expert so happy to be corrected on this.
I know two people break theirs with an 8ohm speaker.
Love your honesty. It's why Im still here 😉
Ive been gravitating to the Blackstar HT Series. They sound so much better to me. Especially the the HT 5R head. Great review as always Phil. Thank you.
I just got this head and honestly after 3 hours of bedroom play I'm thrilled with it. I have an MX112 box but with a replaced V30 speaker, which I opened just like the SC112 box and it sounds very good. I also want to try it with the V-Type speaker that I have in the shipping package. Or I'll put it in a SJ2525c with a Greenback and I also have a MB Thiele 90 box. I bought it second hand for 70 Euro with 14 months still under warranty.... so much fun for a few bucks....
I have the 5 watt combo and its great for late night jamming of the Sunset Strip tone.
Really , I love sleaze rock/glam metal
Hi Phill, and Thanks Phill.
Dunno if you are still interested Phil but I have the DSL20HR. Its ok as a bedroom amp, but as soon as you crank the volume it becomes a weapon! The only thing the DSL20 lacks that the more revered DSL40C has, is a dedicated crunch channel. I overcame this putting an MI Audio Blues-Pro pedal in front of the clean channel. Now I have it all - sparkling cleans, melodic blues, hard rock sizzle and (with my boost pedal engaged) face searing metal gain.
Another Gr8 vid Phil. I got the new DSL40CR & the Origin 20 combo. After switching the DSL40CR speaker to a creamback I’m absolutely loving it. The Origin hasn’t supplied yet but I’m worried about the 10” speaker. Kinda wishing I would’ve gotten the head version.
I totally agree with you on the clean on this. Way too thin. The gain channel sounds great though. I opted to go ahead and spend the extra and pre ordered the new PRS MT15 as I really like what I am hearing on both sides of it more than the DSL 20 I have demo'd. We will see when it comes in. Love your channel and reviews as you give us your honest opinions and also why you feel the way you do. Keep it real and rock on!
i love small amps , after 20 years of using my fender hot rod , i bought a marshall sl5 and a vox lil nightrain . cant be hapier and end up playing a lot more
Dang you weren’t lying when you said bright
I liked this video, it was nice and informative. I tried the 20w combo at my local store, and thought it was a bit boring. I was interested in the 1w head because I thought it may be easier to crank that clean channel for some old school Marshall tones.
But I think even at the low power mode, it may be a bit too loud to crank in my tiny apartment. I have a Vox AC4 that I loved when I cranked it at the store, but it is way too thin and boring at home.
Phil i was contemplating adding it to my 4 well researched no regrets amp collection. I appreciate your non biased reviews! Thanks always! Great work! I recently received your know your gear just w the guitar shirt. So cool!
I had tried 3, 15 to 20 watt tube amps (EL84). I thought they sounded shallow, not enough bottom end. I had seen your Quilter mini head video, couldn't believe what I was hearing. Watched some other reviews and found the Quilter 101 reverb mini. I bought the 101 Reverb and love it. I would never of found Quilter with out you.
Correct me if I’m wrong Phillip, but didn’t Marshall market these as not having a clean channel but a crunch channel that can be cleaned up a little. I bought mine with that understanding and just set my classic crunch channel to the gain setting I wanted and just roll the volume back on the guitar which seems to tame that high end quite a bit.
Anyway, yeah I think you’ll be much happier with the DSL20h . I bought both when they came out and the 20 watter definitely has the dna from the JCM2000 series for sure . It can get loud as a mother trucker too! Thanks for posting up another great video!
I have the anniversary made in UK one, it's really great
Love the honesty. Excellent review
Based on your demo I would recommend anybody interested in an amp like this to look toward trying to find a used Vox Lil NightTrain. It does clean and dirt both very well and you can get a really Marshall’s tone. No on board reverb though. You can usually find one used for around $150.
Andrew Smith I sold mine and got a Vox mv50 clean, the little mini nutube thing and I sounds so much thicker and nicer to my ears, great with my pedals too
I agree I have one and it's an amazing little amp.
Yeah, why Vox stopped making the Lil Night Train I'll never understand. Such a cool amp
I’m a big combo fan, less work, really enjoy your videos thanks, big fan.
I know this really doesn't apply but i just bought the new dsl 40cr and was very impressed with the clean chanle.
I live in a condo. It's a great amp. 8 out of a 10. And for a tube amp, it won't break you.
It's Awesome. Hooked mine up to a 1×12 fender cab. No complaints.
I wish the DSL20 was available before I bought my DSL15. As I’ve learned signal chain as my pedal board grew I really came to regret not having an effects loop. However, it takes pedals very nicely in the clean channel and has enough headroom to not get ugly when hitting it with a Red Rox and Soul Food.
Thanks for the review I was thinking to buy this amp, I almost gave up now ;). It seems it is not in par with 50th anniversary series. One thing to remember though is 50th anniversary series had 5 tubes, this one has 3 tubes only. That might explain the sound quality difference.
Hi Phillip, maybe the question has been raised already but in the manual it is written "1x16 ohm" only, not "8 ohm minimum " ! Are you sure 8ohm load is safe with Dsl1HR ?
I've recently purchased a Randall rd40c for a bargain price and believe it or not that has a great clean and spring reverb and a footswitch. Oh and the gain yes there is plenty of that. It seems to be a very much overlooked amp but worth checking out.
I tried and really liked the DSL 20HR except for the fx loop that radically changed levels when using a looper! If I tracked a clean phrase and then switched over to the hot channel to lead out, the looping phrase dropped in volume. If I looped a hot phrase and switched to the clean channel the looping phrase was way too loud. For this reason I returned the amp, which was really too bad cuz I did like the tones I was getting. Got the Rebel 30 Mkii instead and am very happy.
My DSL 1 HR is definitely not to bright, using a Vintage Modern 425 Cab.
Changing the Stock Tubes to old NOS Telefunken did A LOT to improve the sound.
You can hear the amp in my videos
Yes this review is crap. Through greenbacks this amp sounds amazing. I dont know how he made it sounds so bad but then i also think his channel is crap and he's wrong about most things.
I just bought one of these for £140 and its the sickest thing I've ever bought. I'm blown away.
Hey Phillip, I really enjoy your gear and info vids :) I know that you prefer amps with great clean channels (and reverb...can't forget the reverb) to put pedals in front of. Totally valid. But as someone that prefers to get the tone from the amp, this looks like a winner. All the reviews I found were 5 stars. And as far as the brightness on clean, it probably fattens right up with the gain that most people who buy it are looking for.
I had a Class 5 and I had to turn the bass all the way off when it was dimed. Maybe if you just turn the treble down a little you'll prefer it. I have one of these delivering tomorrow so I'll know better soon.
So here's an update after spending the afternoon with the DSL1HR. (My need is a silent recording tube head solution that can get a 70's warm distortion tone)
My feedback has to do solely with silent recording into Logic Pro X.
With an LTD Deluxe traditional (Les Paul style) and this little head,I found the classic but over-driven tone I was looking for specifically for recording....and here's how:
***************
The 3.5MM Audio-In also works as a direct out *minus the cab simulation* which I found rather pokey. The settings I landed on are the Super-gain channel with volume at 12-2 o'clock (seems more saturated this way), gain maxed, Voicing button engaged (going for classic rock tone) Bass 10 Mid 75% Treble 75%.
For recording, I can put this in front of a transparent (or any) amp sim, here comes the best part, ***and with any cab sim/impulses you want using the audio-in instead of the direct out (which has the cab sim).
The Audio-In gives you total cab-freedom, and for recording, that's amazing. Until Orange makes an OR15 version of this, this will work. (And the effects loop is the other kicker).
Final note: Phillip, I ended up agreeing with you on the general tone of the amp. But that is only because I specifically need a retro Marshall tone.....so I just bought a Class 5 combo.
I scoured YT for demos of the new Origin but I just did not hear the dimed out Class 5 tone in the Origin demos.
Phillip was right on this one :) Duly noted my friend!
Thanks for the review Phil. I was thinking you might regret not getting the 20 watt but I waited to see what you actually thought. I just got the Peavey Valveking 20MH, for a can't refuse price, and I'm still working with it to get it to sound like I want but may still go after the DSL20HR also. What do you think about the Hughes & Kettner Tubemiester 18?
Nice review (as always) this amp piqued my interest quite a bit but until now all the reviews were the sponsored ones and not an objective opinions. Always nice to see an honest review.
Hi Phillip, thanks for the review. Could you elaborate a little on the impedance issue. I would love to be able to transport only one 4 x 12 cabinet running two of these heads into it in order to maintain the stereo spectrum of my effects through a single cab. But according to the backside of my speaker cabinet, the impedance in this configuration is 8 ohms per side (otherwise it's either 16 or 4 ohms MONO and I'd still have to carry two cabs out). On the backside of the amp head, I only saw wording that specified "1 x 16 Ohm" output jack impedance. I assumed this meant 16 ohms was the minimum impedance. Are you saying this amp can adjust to match different speaker impedances?
Pushing that clean a lil more into breakup, neck pickup on a strat =😍
OMG< that thing triggered my tinnitus like no other...ouch. Agree with your overall assessment wholeheartedly.
5watts is too loud for bedroom use. I have a 7w non-MV Matamp (Matamp built all the early Oranges) with a power scaling valve - and even at 10% (ie 0.7w), it's way too loud cranked into a 1x12 Celestion G30M Greenback cab. I use it with a Hotplate attenuator for home use. Hearing is logarithmic - to double the perceived loudness, you need to increase amp power by 4 - 5-fold. So a 5w amp is half as loud as a 25w amp, and a quarter as loud as a 100w.
Agreed, 5w is brick through the window worthy.
Spot on Fang, my 1 watt Randall on a 4x12 is pushing the limits of my apartment life. Thank god for digital modeling and amazing computer plugins these days.
10% volume of a 7 watt amp is not .7 watts. That's not how watts work!
My Tiny Terror on 7watts too loud in basement!
Really good review, I think a good EQ pedal could fatten up the clean channel possibly. I think the dirt channel has that classic Marshall sort of compressed drive which could be only enhanced with the right pedal. For home use it's pretty good at that price IMHO
I have that same amp. I don't really use the clean channel so I have no comment on that. I did however switch it to an 8ohm load by unplugging the lead from op transformer going to circuit board and plugging in the lead that the factory has tied off. I have the amp plugged into a silver jubilee 212 horizontal cab. Sounds great for a $300 Marshall.
Good stuff as always Phil
i have the 50th anniversary jvm1h and its just amazing
Good review about what you actually thought about the clean channel being a bit thin. These heads are hitting the market at $399 everywhere so I'll wait to pick up a used one in a year for way less that's still in excellent condition.
I just wish Marshall would have made these back in the 70's, my mom would have appreciated a 1 watt Marshall when I was a teenager and learning to play guitar, LOL! Yep, Mom would have liked these little Marshalls, I had a 100 watt head and a 4x12 cabinet for practicing...
At least my rig never sounded thin!
PeterDad60 - I stand corrected, I'd just been looking at the combo model which runs around $349... That's where I got the 3 from.
Once they flood the market with these, I'm guessing that you'll be able to pick up one in excellent condition for $150-175. A dual channel Marshall with reverb for that price, I'm in. Phil's problem with thin is not an issue since I play an R8 LP... just sayin!
Thanks for the correction! Take care!
I just bought a used demo version for less. Immediately after trying it out I opened up the cabinet and pulled the chassis out to investigate. There is a white wire tie wrapped insides coming from the output transformer. Thinking it has to be 8 Ohms. I will be installing another jack next to the original 16 ohm.
This new version amp has both high voltage and output transformers mounted on the exterior of the chassis like full size Marshall’s do. The 50th anniversary models had everything mounted internally and output transformer was mounted on the PCB.
Going to be modding this and start selling modded DSL1 amp on eBay and Reverb. Gain is too compressed, needs to be modded like my DSL15 needed.
Hi I know this is an old comment and video, but can you confirm that there really was an 8ohm output wire inside the head? The stupid ohms issue is the only thing holding me back from buying one right now.
Iv'e had a DSL 15H for about a year and it serves me well as a practice amp and for jamming with folks. When I saw the DSL 20 comming I got pretty excited. It has a power section more in line with most marshalls (EL34s) and everything else just seemed like it was better thought out.
So in early February I ordered one from Sweetwater (DSL 20H). I primarily play at home at lower volume. Primary guitar is a 2000 Gibson Les Paul studio with Duncan Alnico 2 pro (PAF basically) and a jazz. I found the DSL 20 overall to be very bassy at lower volume, bordering on wooly. Even with the resonance and bass turned way down it was just too much. However, once you do get the volume past 3 or 4 (which is pretty loud) the amp fills out the mids and tightens up the low end and it sounds great. It feels like an amp meant for jamming with a drummer, not for bedrooms basically.
Eventually I decided to return the 20 and try the DSL 1 and I have to say the Ultra gain channel sounds fantastic at practice volume more balanced eq, and it sounds good cranked up as well, though it may struggle next to a drum set. I do find the ultra gain channel to be a tad dark, and there is no presence control. The clean channel really doesn't stay clean very long, but i do enjoy the way it sounds fully cranked, kind of a classic overdrive tone, but i agree it's a pretty bright clean channel.
Basically, if you plan on playing loud with a band or even small gigs the DSL 20 will definitely be great , but if you just want something to practice on that can give you some nice tones the go DSL1. I would not advise getting the combos of either amp though, the speakers they come with are pretty much junk. All of my experience was with the head versions played through a Avatar 2x12 with a v30 and a g12h.
I kinda wish they made a DSL 5 Head version...
So can you connect a 2x12 to DSL1?
@@AMetalheadsJourney sure , any 16ohm cab will do...I typically have mine going through a 1x12 with a g12m-65 as its kind of silly using a 2x12 when all I do is practice on the DSL1. But I also have run it through a 2x12 just to mess around in the past. Works great just a matter of what you want to do really.
Didn't take long to decide I don't like it.
Thanks for the vid.
Great review as usual but glad I didn’t pull the trigger when it just came out. Will wait to see the origin series I think it will more my kind of amp than the DSL
Great review Phil!,I hope you will review the dsl 20 head
Best review off this amp by far. I agree 100℅
I have the combo version of this amp and mine sounds great, nothing like this vid. Not sure if it is just sounding different through the recording?
Now We want one for recording !
There's also a really loud pop when you change channels using the footswitch. Apparently Marshall says it's an "inherent characteristic" of the amp. It's very annoying and makes you think you're going to blow a speaker at high volumes.
It could be purposely bright to help offset the low volume being played at. I found the tone on the 5 watt to be very nice clean... Going to demo the the 1 watt combo tonight. Fingers crossed, as 5 is too loud. Looking for tv volume or slightly louder, apartment friendly amp.
Yeah Phil, i checked this amp out at the local Guitar Center and everything you said was spot on. it sounded thin, bright,no warmth. I wasn't impressed.
I got the DSL 20..great pedal platform
Does yours has a bad hiss when idle I tried the 1 and 20 returned them both
@@mattyounis5636 Mine does. I thought I had a grounding issue since I had recently swapped pickups on my les paul. I learned to get over the hiss but it sill bugs me from time to time
Great review. Saw your review on the Blackstar HT-1R as well. Curious on your thoughts comparing these two. Out of state for a project for a couple years and moved from house into an apt. Didn't bring amps and need something I can play without disturbing wife/neighbors, likely through headphones most of the time, ideally with a line-in I could play along with. Would like to connect pedalboard as well. Haven't had a chance to play this, but played the Blackstar through headphones this week at the store and was impressed with the tone I was able to get from it. Thanks for any input.
I always prefer brighter sounding amps. It’s far easier to make a bright amp sound darker with pedals and EQ, but it’s really hard to get a darker amp to sound brighter. But I would still choose the 20w over the 1w
Phillip, I am looking at the manual and on the head itself and it seems to only ever mention supporting a 16 ohm load. Where did you see that mentioned? If only a 16 ohm load is supported, how might that have affected your tone tests with 8 ohm loads?
I got one last week and love it ..horses for causes..
I like it you might not ..
Sounds better than the clean on my Marshall 8020 open back
I really like that clean 🤗
My caveat to this is to play it safe with the impedance. A few people have had issues running a 1x12 with an 8ohm speaker.
Thanks for the great review. I was thinking of this for home and because it had reverb, but honestly that reverb is pretty poor and that thin clean tone is NOT for me.
Quick question, would this amp paired with a 2x12 cabinet be loud enough to play in a band with?
I own one of these now for years. It is my home amp full stop. It does everything I want it to. I especially love the clean channel. I like that it is so clear. And it takes pedals really well. Its just a small Marshall. Just don't buy the combo, which is true for most of the small amps.
Great video I bought a dsl40cr for playing in the bedroom lol and I can’t really get that quiet enough with still keeping the tone and distortion so was thinking maybe add the 1 amp head on to it but think I’ll look at the 5 now unless you can recommend some others cheers
Off topic, is that a Breedlove acoustic on the wall? Import or USA? Thoughts either way appreciated.
Ive had this amp for a year. Ive had the blackstar 1w for 3 years. If your after a 1w amp you probablly cant play at the loudest volumes but want that tube sound which is why your here. Well i wouldnt be able to play the marshall at volume 1 out of 10. Its that loud. Yes you can drop it to .1 w but it also sounds like its ina fishtank. Im sure it sounds great loud bit it is far to loud to be played at home. The blackstar on volume 5 or 6 is the same as volume 1 on the marshall. Clean channel on the marshall is woeful. Sold the marshall and kept the blackstar
What low wattage amps would you recommend for a pedal platform? I actually thought this amp would be good for it!!
Run a Helix into the loop return. The DSL1CR combo sounds stellar this way. Pedal issues are resolved and you can get nearly any tone you want at 3:00am. Using the power amp gets you a neutral tube tone that FRFR’s don’t match. Also, stock tubes are shrill as hell. Replace them with some good NOS tubes. Lastly, the combo is for 16ohms only. Perhaps the head is different? Running at 8ohms will degrade the tone and make it brighter as this is an impedance mismatch with the output transformer. Not sure why an amp guru wouldn’t have pointed it out to you. Try it with 16ohm cabs and report back. It won’t be thin sounding.
Ruinwalkers Is the marshall dsl1hr better than the cr? I have the dsl1cr now and its thin sounding and lass less low end. Do you think if i get the head and a 1x12 cab improve and make my tone full? Thanks.
Hey Phil, I have the DSL20h and it jams. This one watt thing is awful. Take it back. The 20 sounds good on the clean channel and on the dirty channel it will blow your mind. I am playing through a Bugera 2x12 cab. I can only imagine what it will sound like through some of the cabs you have. Keep up the great work.
Just play the clean channel with neck pickup and/or tone button enganged. It sounds really good.
Interesting to hear how bright your DSL1 is. I have a DSL1CR. While it was a bit shrill, replacing the tubes tidied that up and the clean channel has some beautiful grind without any harshness. With quality tubes, the amp just changes its entire character.
Hi Trane, which kind tubes did you go with ? Preamp/Poweramp/both ? Thank.. :)
@@davidsogeti I replaced both pre and power sections with Genalex Gold Lion. 2 x ECC83/B759 (premium) in the preamp and 1 x ECC82/B749 in the power section. They are absolutely lovely. For bedroom use, I run at 0.1 Watts and adjust volume till the grind I want is there. While it's unnecessary to do so, I got matched and balanced preamp tubes. The output of the tubes I received is 91.
It's worth noting that the stock V1 & V2 position tubes are not identical on the DSL1CR and DSL1HR amps. The stock V1 tube is a slightly more microphonic type than the tube in V2. I didn't want that, so stuck with the matched Genalex ECC83s.
Stock tubes in V1/V2 are:
VLVE-00049 12AX7B/ECC83 Shuguang High Microphony Gold Logo
VLVE-90066 looks like rebranded JJ ECC83S
The JJ ECC83-S is about 1/2 the price of the Genalex.
@@TraneFrancks Whaou thank you Trane for your detailed answer, very interesting :) In fact I do own the head version DSL1HR, you know what differs between Combo/Head tubes characteristics ? I will open it up and check tubes reference soon.. Concerning the 0.1 setting, with my current stock configuration, there is not way to get nice natural overdrive/distortion from clean channel, even in 0.1w, in a descent volume at home (appartment) => II could only try it in a gig room, putting volume after 12h.
Last question .. what do you mean with "more microphonic type" ? - Thank you !
@@davidsogeti One of the stock tubes is intended to have a higher gain characteristic than the other for a more aggressive tone on the Ultra Gain channel. For me, that tone was unusable. Regarding HR vs CR tubes, they're identical. The only difference is the chassis is flipped in the head vs the cab.
You may want to use an overdrive pedal on the Classic Gain channel to get more breakup in the tone without excessive volume. You can set the drive pedal volume to unity (the point at which the volume stays the same when you turn on/off the pedal) and then just adjust the amount of gain to change the amount of distortion.
I use an EHX Soul Food to good effect in this way. Whatever you choose, though, is a matter of choice. There are many different OD types that all have their tonal characteristics.
I hope that helps.
Phil, are you gonna check the new Origin series?
Sadly, there is no marshall origin 1 watt :(
DId you have a chance to compare the new DSL to the Origin at NAMM? How does this compare to the origin 20 with their new attenuation? Thanks Phil, great video.
As always, great info Phillip!! Quick Question, What is the "Blue to White fade" finished, double cutaway guitar above his left shoulder,(his right side for us viewers)? I thought PRS, but it appears to have Gibson trapezoids on the rosewood neck. Whatever it is, it looks sick!!!
#I wanna know your gear:)
Thanks for the honest review. I find most amps that are hyped and on the cheaper side (under $500 made in china) to be uninspiring after a short time.They may sound good and entertaining the first couple of times but soon fades,.... kind of like a pop song ;). I hate to say it but it seems you get what you pay for in guitars and amps. Have you come across a reasonably priced, pro sounding, low wattage, Marshall/Classic rock amp for home use? Does it exist under $1000??? Thanks! MIles V
I'd need an LP with the neck volume and tone rolled back to make that clean channel usable.
Any idea if it has a tube cathode follower stage like the DSL20HR or not? There's one ECC83 less. Cathode follower adds to sustain and compression. Solid state phase inverter likely as well. Thanks.
Thanks for doing this video. Was interested in that little guy just for kicks, but no way is that tone worth the money. I hope you return it and get the 20 watter. Are you looking into the Origin series at all? They seem like a decent (ie, cheap) alternative to a 2061x. Thanks again Phil, and keep up the great work!
Hi! great video & review! What other 1W tube platforms do you recommend? I actually love the silent emulated output on this one. But you just changed my mind! Thanks!
I really like my Blackstar HT1 mkll. It comes in a head or a combo. 2 clean voices, 2 OD voices and reverb too
Hi Phillip, I own this "great" little amp. The issues you are talking about (glassy sound) I just can resolve turning back the treble to 11. Thats it !! Great warm sound with my Les Paul and 1 x 12" cabinet. (with 4x12 totally different) Obviously my Strat is a lot brighter. But IMO the sound depends a lot on the guitar you are playing thrue that amp. I'm very lucky with that Baby Marshall............for that small price, I've never played a better 1W amp
With a Les Paul I don't have any problems with the brightness at all. May be a singlecut-friendly amp...
@@10centjanes44same
? I have the JCM 2000 DSL1H ( not HR ), I have the head only and it is the 50th Anniversary made in England- what cab should I be using, and did it originally come with a cab?
The head is MINT, please help and thank you!
I have one of the JCM1 anniversary mini stacks, and it sounds awesome. Nice and full sound, and more than loud enough to where i usually have it on the .1w setting. This sounds way too bright and harsh. I like trying out low watt tube stuff, but this one i havent seen a review that made me want it.