IAA Walk Around with
Вставка
- Опубліковано 27 жов 2022
- Sub to @MonkeyWrenchMike
Follow me on Instagram: / autoauctionrebuilds
Get your $4.89 CarFax or AutoCheck here: www.autovhr.com/deal
Email me: autoauctionrebuilds@gmail.com
OKMO Power Station 1000w: amzn.to/3GiBVfO
OKMO 1000w w/ Solar: amzn.to/3GjEPku
OKMO 2000w: amzn.to/3GcqBSt
Jump N Carry 12/24: amzn.to/3ugOUMM
JNC 660: amzn.to/3IKhlH4
JNC Air: amzn.to/3B1ZpoR
#iaa #mazda #auction - Авто та транспорт
I’m so sorry about your uncle …much love and prayers to your family in these difficult times
I figured it out with the 2010 Prius, they are super finicky with spark plugs. Switch them out it and it should fix the issue with the death rattle at start up. I switched mine out and haven't had the issue since.
Randy I’d the worst day of my life until I came home from school to watch your video and you and Mike made my day a whole lot better so I appreciate y’all!
Sorry for your loss, He was a lucky man to have someone as wonderful as you to be there for him with all your love.
First of all my heart felt sympathy goes out to you and your family take comfort and knowing he is not suffering anymore
Sorry to hear about your uncle. I’m glad Mike at least gave you a little bit of happiness. I’ve been subscribed to you for a long time many years and love your channel. You did finally convince me to start using instagram so that’s awesome too. Your a good man keep up the awesome work.
So Sorry to hear about your uncle passing 🙏 condolences Randy to you & yours 😔
ua-cam.com/video/_SoKLZPgzF4/v-deo.html
VSC/Check Engine on Toyota is usually an O2 sensor.
Hey Randy, Always a treat to see your videos! I think that would be really really interesting for your channel to show someone fixing up a giveaway car in your garage!
My condolences on your loss. Thanks for the content Randy. All the best to you and your family.
I miss the old school Datsun, Toyota, Ford ranger/ Mazda, chevy love / s10 pickups. Would totally restore one to use for car show cruising on weekends. Actually owned, a datsun pickup, a small sized toyota, and a s10. Loved driving all of them.Thx for sharing
ua-cam.com/video/_SoKLZPgzF4/v-deo.html
I would love it unfortunately i'm in Europe even if they would send it here i can't find parts for it enywhere, i would have to customized it..
Hi Randy, I 'm 76 years old and my wife says I 'm addicted to your show. I've always been a car nut.
The Prius rattle is most likely due to the EGR valve.
My condolences on the passing of your uncle.
A BIG hello from Alberta, Canada
Rocky Racoon 1967
I had friends that had those years Prius’s. It’s the water pump. When it’s done for, they do that. Friends told me it’s a $600-$800 fix. $500 if you’re handy. That Prius is a quick fix.
Love and payers to your family during this difficult time! Really enjoyed the video!
The Toyota and the Mazda would be great for someone. We sold a highlander at the auction with 395k on the clock. It ran perfectly and had just one tiny blemish on the armrest.
I gotta say this has been one of the funiest video's I seen, poor Monkey Wrench Mike you scared the living dailights LOL
Smart Randy.
Involving a viewer in a video will be a gold mine.
Randy another great video sorry about your uncle passing you and mike make a good team been trying to get on Instagram may need a new phone take care of that shoulder see you next time
Sorry to hear about your uncle, thoughts with you and the family.
Love the idea of you buying the cars and letting others use your facility to repair and *potentially* drive away! If I was US based I’d totally take you up on this offer, alas I’m UK!
Cool to hear a shoutout to Vice Grip Garage and Derek Bieri. "Well I'll be dipped!" Great content and interesting cars. I'll keep watching
That Mazda pickup is perfect as it is. love it
Yeah, the B series is a Ford. We had it as the Ford Courier over here in South Africa.
My first vehicle was a 91 Mazda B2600i Cab Plus SE-5. My grandpa bought it in the mid 90's to flat-tow behind his RV and ended up gifting it to me. Then, my uncle got it in 1999 and still drives it. Think it has over 250k on it now. 121 hp, 149 lb ft. Probably pretty gutless with the autobox, but they're pretty peppy with a 5 speed.
The sound of it cranking over brings back some memories. These were so simple and easy to work on. They did seem to like to leak out of the valve cover. Mine had an ECU failure where it would drop 2 cylinders which was fun when it would randomly happen trying to go down the highway.
I think your right about the excursions .wow your going to let someone use you stuff that's awesome 👌very very generous.
ua-cam.com/video/_SoKLZPgzF4/v-deo.html
I had a 91 Mazda that ran awesome with 325k on it that things a keeper for sure!
I melted a piston on my way to work today and I work 25 miles away from home, I would LOVE a “beater with a heater” at this point. Rough day 😅
Those Mazda trucks are still being used all over the town I am in, in Mexico.
Can't wait to see some car giveaways subscribed and follow on Instagram!!! But hope you have a good day Randy and that shoulder is feeling better I'm sorry to hear about your uncle. condolences to you man for keeping on going as hard as it is for you, we got your back
Back in the late 90’s I was parting out Mazda B2000’s. I had so many ads in The Trading Times that salvage yards were calling me for parts. The gas tanks eventually leaked from rust and the head gasket failing between 150,000 and 180,000 were common. They ran horribly if you fed them any ethanol gasoline. The 1986 models had the brake line going back to one of rear wheel cylinders then across the axle to the other wheel cylinder. I had persistent problems with the rear brakes doing nothing even after going through all of the brakes and replacing the proportioning valve. Mazda changed the rear brakes to the line going to a T in 1987. But the engines were darn good. My first was was an SE-5 sky blue metallic 1986 and it actually turned heads in the first few years I had it.
And those B2000’s had non replaceable u-joints in the drive shafts. It was common for people to cut off the end of the drive shafts and installing ends with replaceable u-joints. I got lots of calls for drive shafts.
Great trucks. I use to have 25 ish of them sitting i was parting out for years in the mid 2000s I got out of it around 2010 but I have a couple buddies they still have some in the back yard they use for parts and they buy junk ones when they pop up
I enjoy watching your videos
I agree with you Randy on the Excursion!
Whoaaa that's a cool idea, Wrenching with Randy at AAR 😲 🤘🏽🔥
ua-cam.com/video/_SoKLZPgzF4/v-deo.html
I had a Mazda B2200 and loved it. The fuel injected B2600i was my dream back then. Sorry for your loss. Hope your shoulder heals. Seriously consider seeing a chiropractor.
The Highlanders are known for transmission problems. The trans cooler is built into the radiator and when it fails, it leaks coolant into the transmission. The bands are held together with water soluble glue and they start to separate.
Awesome show you and the monkey work great together.
Man I love that Mazda been looking for a mini truck as my first project.
It fired right up!!!!!!!!!!!!!
Love the video randy
My Prius used to have the same raddling noise car had 192k miles
Hey Randy sounds like either the Harmonic Balancer or the Serpentine belt tensioner on the Prius
Thats so funny, I have a 1987 Mazda B2000 thats the cab plus like that one except mine is red.....The Ironic thing is, I also have a Chevy Monte Carlo thats the same color as the one sitting beside the truck. Both sitting side by side in my driveway. I love the videos. Sorry to hear about your Uncle passing away.
21:40 that's just the EGR. The path to the plenum gets clogged in a few cylinders and it will fire unevenly. It stops when you give the throttle because it makes the EGR close. No parts needed for this one... Just a few tools and patience
At least your Uncle is healthy again, and no longer suffering! So sorry he is gone!
I wish I could learn from you and what you know. Late in life I find cars fascinating
Super video Randy
We had a 2003 Toyota Highlander in Australia it's called a Kluger here Best Toyota ever made Get it for a good price and Fix it cheap Fabulous Family car
I love the idea about buying and giving them away ! People are always In need of a car like you said about when you was in a bad spot you got gave a car wasn’t nothing new but it got you around I love your vids I wanna try to get into buying and reselling auction cars anyways randy hope your plans go to plan hope I can win one 🎉
You shouldve called this episode the Missing DriveShafts
Great videos. Love watching them. Started following you on Instagram
Sorry for your loss Randy
Sorry for your loss ❤️
Randy stumbled across my Highlander, or one I'd want in question.
Salsa over taupe.
The Prius and the pickup I'd pass on.
Thanks for the video, Randy.
That's a good little Mazda truck my uncle had one it lasted a long time .and yes you can fit in back seat I did as a teenager
ua-cam.com/video/_SoKLZPgzF4/v-deo.html
Funniest car duo on UA-cam. Keep that shoulder healing randy
ua-cam.com/video/_SoKLZPgzF4/v-deo.html
i love this duo. Mazda cool...highlander..seems fun, prius SCARED me haha
The little Mazda is cool 👍
He made a valuable point he said if you work in his shop you cannot sue him for nothing and I would definitely record the person in my shop because people steal stuff every day or day. So you can’t come after him for nothing
I love those mazda b2600s
I like the little Mazda Pickup
hey Randy, I just lost my uncle this morning from Alzheimer's, what a terrible way to go out
Got luv that 2nd Gen Mazda BSeries pick up be amazing little fun truck a little shocked it's not manual but those are rare aswell as Mistusbh Mighty Max trucks from same era & red Toyota Sequria is nice too needs a little TLC in front least it runs good.
That is clean b2000 I had the same one I wish I never sold it
Hi Randy y'all are amazing I I hope one of these days I can meet you in person your huge fan Sean from Kingston Oklahoma
That knocking sound is caused by the shock for the drive belt tensioner watch Wes work had a Corolla do that
You and Mike are just to much. I was laughing my ass off the whole video. Thanks for the great content.
I have the same Prius! The color changes on car before bumpers.
A technician I used to work with had one of these come in making that noise (customer thought it was an exhaust rattle). It was a bad head gasket.
Ther is a jump point on the hood I used to work as roadside assistance and I jumped so many Prius nice car but 2012 has probably with oil
To delete that vsc, brake and check engine is a common problem for the Toyota small suv's. If you change the charcoal cannister and clear the codes it should clear those lights on the dash. It happened to my daughter's Rav 4.
I love excursions. I would rather have a 2000 or 2001 with the 7.3 power stroke but the v10 isn’t bad
The Mazda B2600 in Australia these were then Mazda Bravo and l owned one one of the best utes l ever owned also they were the Ford Courier same vehicle different badge
I was wondering when they where going to feature that B2200 on the backround .
That excursion came from Michigan probably, I bought a car from that dealership on the back before.
15:15 sounds gread and WIN WIN
Starting up the Mazda you should have said BRING THE THUNDER
Can u show me the ford expedition right behind the Toyota highlander thanks
Love Prius they are awesome milage
I got the same prius. It needs the EGR pipe cleaning. But it may be to late for this one
Actually You CAN bid on dealer only if you use a broker... ive tried to snag a few here in WV and working on a trailblazer here right now that doesnt need anything other than some clean up....
The EGR ON THE Toyota Prius are bad about getting stopped up thats what is most likely what's causing that noise.
what are the cars in the background wrapped in red or orange plastic ??
That was funny Randy
Aye! What up Randy?💯✌️
3 things I heard that couse that prius rattling
plugs
injectors
EGR
What is it whith those cars under the red sheets in the background? Very interesting :)
I want that eclipse 😷😷😷
Whoa the Toyota started up 👍🏾
I’d love to drive one to RI and record the whole experience lol
Randy I just wanted to let you know my family and I are praying for you and yours during this difficult time. Just remember your uncle is at rest now. No more pain, No more sorrow, No more worries of any kind. he is up in heaven now with our Lord Jesus. walking those streets of gold. You will always have your memories of him. God Bless the McCord family.
Randy if you have the means to help someone and if it doesn’t turn out perfect needs work free is free be willing to help yourself and appreciate what you have given to you
Fuse box under hood has positive
If i was closer I'd buy that Mazda love those trucks I have alot of parts for it
Need more FireTurd 190 content
My prayers are with you and yours.
Question; why would you continue buying anything from IAA when they won't auction your cars which are often cars from them?
the prius one is really easy to fix its just a bolt in drive shaft or engine
There's a roller bearing out in the hamster wheel . Causing a slight pitch variation therefore the rattling noise ,🤔
they siliconed the radio in the dash lolz
I would love to get that mazda
Randy on the prius its a faulty coil pack or spark plug. Easy fix
The Mazda is great, I would make an old school lowrider out of it.
ua-cam.com/video/_SoKLZPgzF4/v-deo.html
When u put your faith in God he won't let u down but u have to be happy for what u have accomplished keep moving forward don't look back