I realized you cannot weld PP to PE. So I am changing my project to using all PE or HDPE products. Is there any tips in particular to be aware of when welding PE to PE as compared to Welding PP to PP? Any suggestions? Thank you
Hi every body, I have a very important question. Can this welding method resist in 90 C temperature? To brief, I have to weld thin Polypropylene and PTFE foils together to fabricate a setup (membrane distillation module) and high temperature water (90 C) would be passed in this setup. How can I weld them to not to be separated in 90 C? Regards
Thanks for the video .Can you tel me if the heath gun you are using blowing hot air continuously .I just bought heath gun look very similar to one you are using but it keep cutting on- of all time couple second on couple second of ,is this normal or should it blow evenly thanks in advance Mike
good presentation. i can't help noticing that your welder is absolutely identical to my Leister triarc right down to the tips and off course colour. Are u associated with them. I don't bother with the speed tips to be honest instead i pendulum weld everything with excellent results. By pendulum i mean the same as you do in the second weld. Cheers
Could I ask you? Where is the limit with speed and high temperature? If I want to weld faster I have to rise up the temperature but i guess I can't do that forever. I have Leister triac AT so I can also change speed of the air (50 - 100%). And my second question is what about front angle of the speed noozle? What it can impact? Thank you!
it should not exceed 350 degrees, do not raise the temperature and the blow out is enough. We don't understand the second question. Do you have quick welding nozzles?
When you weld, do you melt the surface as well as the rod? Or do you just melt the rod? I cannot get a strong weld if I don't melt the surface so I might be doing it wrong.
Buenos días a todos quiciera saber Si lo podrían traducir al español se los agradecería mucho estoy aprendiendo sobre este tema y me gustaría aprender más de profesionales
Excellent explanations .. thanks
Thanks! Greetings
I realized you cannot weld PP to PE. So I am changing my project to using all PE or HDPE products. Is there any tips in particular to be aware of when welding PE to PE as compared to Welding PP to PP? Any suggestions?
Thank you
Hi ! Yes. Do not exceed 320 degrees :)
Thanks for the great video!
thanks !
What is the appropriate temperature for welding work?
it mainly depends on the material you are working with. Write the specific type and we will indicate the temperature.
Very educational, thank you........one of the best explanations on here, am i one of a rare breed welding PP ?
Hi There ! - iam sure not really :) Greetings!
Hi I'm pp welding and PVC palstic welding in the Philippines..how to apply in your company
Hi every body, I have a very important question.
Can this welding method resist in 90 C temperature?
To brief, I have to weld thin Polypropylene and PTFE foils together to fabricate a setup (membrane distillation module) and high temperature water (90 C) would be passed in this setup.
How can I weld them to not to be separated in 90 C?
Regards
You have an ultrasonic method. It is not possible to weld PTFE with polypropylene.
What is the type of this PP? PP-H?
Polypropylene, Homopolymer - has higher chemical resistance.
Thanks for the video .Can you tel me if the heath gun you are using blowing hot air continuously .I just bought heath gun look very similar to one you are using but it keep cutting on- of all time couple second on couple second of ,is this normal or should it blow evenly thanks in advance Mike
We don't know what you purchased, but this device has a continuous blowout. In addition, it is suitable for continuous operation, even outdoors.
Does this work with ITW Formex fireproof Polypropylene?
Do you mean self-extinguishing PPs?
good presentation. i can't help noticing that your welder is absolutely identical to my Leister triarc right down to the tips and off course colour. Are u associated with them. I don't bother with the speed tips to be honest instead i pendulum weld everything with excellent results. By pendulum i mean the same as you do in the second weld. Cheers
Thanks, my Welder is BOSITE-D. its very similar to Leister.
How strong are the welds? Can you make a video of you trying to break it?
The weld is really durable, you have to trust us, or visit the Polish UA-cam channel and check out other videos
Could I ask you? Where is the limit with speed and high temperature? If I want to weld faster I have to rise up the temperature but i guess I can't do that forever. I have Leister triac AT so I can also change speed of the air (50 - 100%). And my second question is what about front angle of the speed noozle? What it can impact? Thank you!
it should not exceed 350 degrees, do not raise the temperature and the blow out is enough. We don't understand the second question. Do you have quick welding nozzles?
@@Ataszekinternational Yea sorry. Quick welding nozzle. Same like you at 11:00
Hi I'm pp welding and PVC palstic welding.. how to apply in your company
We do not provide services, but we sell equipment and accessories. :)
👍
Good video.Do you use PP welding rod to weld ?
Yes we are producer of this type of plastic and many more.
안녕하세요, 용접공이 모집 있습니까?
죄송합니다. 저희는 서비스를 제공하지 않습니다. 제품만 판매합니다.
Can you butt weld plastic panels with a hot air welder? Panels that are 10 mm thick?
yes!
Thanks for the information
No problem for us :)
Nice video!.
:)
Can you tell me set temperature
About 300 C
When you weld, do you melt the surface as well as the rod? Or do you just melt the rod? I cannot get a strong weld if I don't melt the surface so I might be doing it wrong.
We melt both surface.
@@Ataszekinternational thank you. :)
Support to technician to learn process of plastic welding
Machine parcel chahie bhai
Check our site: ataszek.com
Buenos días a todos quiciera saber Si lo podrían traducir al español se los agradecería mucho estoy aprendiendo sobre este tema y me gustaría aprender más de profesionales
Hola, será muy difícil, pero siempre puedes traducir los subtítulos en inglés al español.
@@Ataszekinternational muchas gracias por su respuesta 👍👍
Unfortunately that would not be water tight
Watch at 1.5x speed
2x is good
Sir Where can we buy this welder in America
I think it's not possible.
Try online
Amazon
@@John-4649 Not really.
@@jackmills5071 ataszek.com
$20 soldering gun can do the same thing.
The question is different. How long will this soldering iron work? The second thing: a soldering iron is not a plastic welder.
I know this job ..
:)
@@Ataszekinternational Have a job vacancy any country
Voice in background very distracting; could not follow the content.
I am PP welder
We are proud of you :)
모서리 부분 재 용접 해라
This is not perfect welder parsan
It was about showing the technique itself