HUXWRX Flow 762 Ti - Overview

[@gronthomson]

Just purchased a HUXWRX Flow 762 Ti in FDE from you, Capitol Armory. This is my second suppressor purchase from Capitol Armory. You're FANTASTIC! The wait from ATF is ON!

[@travisolexa3074]

So finally we have a 30cal can that performs on par with a RC2 at muzzle with 5.56 measuring in at the same length, reduced weight, and flowthrough. THIS can is truly the White Whale 30cal the community has been chasing.
Time to lose $1600.

[@JNOSNOW]

I was wary of the $1600 but I waited just long enough and got one at $999. Hope you already have yours by now

[@jimc2993]

great product

[@acevent5759]

Nobody ever talks about accuracy with the can. I have the Wilson Combat whisper suppressor, and I gain accuracy through it. As a hunter that’s pretty important. I’m interested in buying this canned if I’m not gonna reduce accuracy at 300 yard shots.

[@d3adlyz3bra]

just started the process for the 556k

[@rodarnold6168]

Great video!!

[@puddle_pirate95]

Hope to have one someday.

[@MrOsoverde]

Great review

[@slyleprecon5521]

Sooo excited!

[@illestdomer2005]

Got it on that Rattler making me want to spend money that I shouldn't.

[@mrcookiemonster7805]

And what about using the Flow 762Ti with and adjustable forward venting gas block? Where gas coming back into the firearm is reduced by venting excess gas out the front of the gas block. Do you think there would be any advantages like maybe keeping the Flow cooler under high rates of fire? Or disadvantages, maybe needing to re-tune the gas block bleed off?

[@pilotincommand85]

What makes this titanium different than any other titanium used on other cans? Seems you are suggesting this suppressor can be used with super aggressive rates of fire on semi auto or full auto how ever I want..where other titanium cans often caution against getting the body heat soaked beyond ~800ish degrees..are those companies full of it or is hux not being totally honest about their performance? I would legitimately like to know I can a couple of the what you call “other” brands of Ti cans..have I been too conservative with them up to now? Or can I use and abuse them like you seem to suggest I can with this Hux?

[@SouthWestGunnerOfficial]

They wont answer. Allow me. Titanium is a terrible source of material to use on suppressors. I assure you it cant handle full auto fire. I also assure you this can sounds like ass. Dont waste your time/fall for the snake oil. Huxwrx is hype train. People push these cans because they are easy to sell but majority of these FFLs pushing the product the employees dont have them on their guns. Speaks volumes. Plus a msrp just shy of 1700 bucks is fucking insane. Literally can buy a surefire or something that suppresses really well and have money left over.

[@pilotincommand85]

@@SouthWestGunnerOfficial thanks for the reply..I currently use surefire and love them..I have their 7.62Ti for bolt guns but looking for something that allows AR10’s to run better..I reluctantly am looking at these but I have definitely zero interest in another Ti can..no thanks. I thought it funny the every other maker says don’t get the can hotter than 800 degrees and then you see this. Passes 6x socom stress test..they also cooled it to 120 degrees in between each attempt..lol so you did it once on 6 occasions..got it

[@mexicangator]

Huxwrx 556 flow is not a gimmick barrel and hatchett run it; the technology is legit; the titanium though I agree I’m still on the fence

[@SouthWestGunnerOfficial]

@@mexicangator id say its somewhat gimmicky... at least a little. When your company needs all the gun bunnies, mike glovers, and influencers to tell everyone to buy the shit i always know that product is probably ass. Surefire suppressors and other big name manufacturers let their cans speak for themselves. Just sayin. I dig the idea of the huxwrx but it definitley doesnt suppress anywhere near as good as its competitors and the price tag is absolutley Atrocious.

[@mexicangator]

@@SouthWestGunnerOfficial I respect your opinion but the price is nearly the same. RC2 is 1079 and you don’t get a muzzle device with the can which is an extra 150-200 dollars and the 556 flow is 1125 with a muzzle device so it’s a push

[@Yisunshin006]

What happens if you get a baffle strike? 🤔

[@wildcat8598]

I would imagine one would be screwed. Depending on how the warranty and customer service is but can’t be just replacing a baffle right? One downside about sealed cans

[@JNOSNOW]

Pretty simple, chop the end the core it out and re-weld a new 3d printed core in.

[@michaeladams8992]

Awesome

[@anthonybravo5176]

What brand of shirt is the capitol armory guy wearing?

[@DesertMariner2007]

Noveske Rifleworks

[@bobbyday8690]

Badass!

[@cesarsaavedra3095]

The fact that I cant find a video with someone metering the dbs in these type of suppressors is keeping me from purchasing. I need to find a place that allows demos .

[@thefinancier12]

Any degradation on accuracy? For some reason, I hear things about that.

[@rascaille3792]

Cool, I would imagine it's not great for subsonics but great for everything else

[@deadbrocks]

Why would it not be great for subs?

[@glaw9583]

Go watch Bauer precisions video on it. He does some subs and it actually performed surprisingly well

[@12cc90]

@@deadbrocks As a rule of thumb, the internal geometry of these flow-through suppressors (CGS, SiCo Velos, Huxwrx, etc) is utilized most efficiently at the higher pressures from supersonic loads. Imagine holding the suppressor up to your mouth and blowing through - most of the air will go through the .30 cal bore down the centerline of the suppressor. Now imagine having a tank of compressed air being blown into the suppressor - there's enough air pressure and volume that it's forced to utilize all the complex flow pathways built into the suppressor. Not the perfect analogy, but it illustrates the point. There are outliers though, I think one of the CGS cans absolutely spanked a .300 Blackout subsonic test with PEWScience.

[@johncrabill7140]

Nice can.

[@calebclark6739]

Come on. For $1500 it should come with 20 stickers Lol

[@Capitolarmory]

Do you want 20 stickers?

[@calebclark6739]

@@Capitolarmory
Yes !!! Lol

[@MyCoolFish]

The hot dog

[@michaelaustin4650]

Awesome video. I’m actually looking into making my first suppressor purchase to run on my MK18 as my duty rifle. Is there any can you’d recommend over the HUXWRX 556K? I’m open to anything. Suppression is huge for me but I also understand you can only get so much suppression with 556. Any insight would be great!

[@Capitolarmory]

There's a lot to discuss, we're happy to do it over the phone. It really depends on individual needs. For work uses, my opinion is low backpressure and flash suppression are more important than dB reduction. You want to minimize collateral hearing damage, but it could also be a two-way range. (Surefire for example is a bit more loud, but excels at flash reduction and is lower backpressure.) The MK18 is overgassed, or overgassed and then some, depending on the version and gas port size. For work related uses, the Flow 556K is a solid option. You are correct in that 5.56 can only suppress so much. There really are a lot of good options you can't go wrong with though.

[@tonygomes3617]

Get the flow 762 can and you will be able to use it on more stuff

[@kennykrabss]

PEW Science

[@mojo4376]

Anything Surefire

[@wildcat8598]

Depends on what all you use. If you use primarily 556 than get a dedicated 556 can. If you plan on only getting one can your entire life than get a 30cal can in case you wanna run it on other stuff. As far as 556 cans go there’s no subsonic rounds so you can get decent sound suppression but mainly you’ll want first round flash suppression. Surefire does great with that as well as the SilencerCo Saker 556. On a MK18 (D I rifle) your gonna have gas in your face which is what helps with these flow cans. Just like everything in the 2A community there is ups and downs with everything and can’t have it all with just one thing which is why you get what’s best for you. Me personally I rarely shoot anything other than 556 so I got the Saker 556. I also got a 9mm can cause I run 9mm secondary and wanted to run 300blk eventually and the 9mm can handles 300blk subs so that solved 3 calibers and the 3 that I run. I eventually want a 30cal can cause I’d like to have a AR10/308 some day

[@BossHugo84]

But Does it Work With Sub 300 Blackout ?

[@SouthWestGunnerOfficial]

Who cares. Buy a better can and most likely for less.

[@calebclark6739]

Why wouldn’t it ?

[@12cc90]

@@calebclark6739 As a rule of thumb, the internal geometry of these flow-through suppressors (CGS, SiCo Velos, Huxwrx, etc) is utilized most efficiently at the higher pressures from supersonic loads. Imagine holding the suppressor up to your mouth and blowing through - most of the air will go through the .30 cal bore down the centerline of the suppressor. Now imagine having a tank of compressed air being blown into the suppressor - there's enough air pressure and volume that it's forced to utilize all the complex flow pathways built into the suppressor. Not the perfect analogy, but it illustrates the point. There are outliers though, I think one of the CGS cans absolutely spanked a .300 Blackout subsonic test with PEWScience.

[@illestdomer2005]

Not as well as other cans, I would assume. Pew Science ratings on the HX-QD 762 are pretty poor (relative to other less expensive options) on 300blk compared to 308 supers.

[@John-ro3vu]

Are these going to be for sale on your website soon? I went to buy one and could not find one.

[@Capitolarmory]

They are! They went live Monday at 10am

[@malcolmpalm]

I really wish these had QD options

[@JohnZ556]

It takes less than 5s to un/install. The muzzle device is an integral part to direct gas outwards into the channel. So you can only have an omni directional muzzle that's kinda big, no matter who makes it. The 17-4 muzzle device also acts as a sacrificial baffle, even more necessary to the Ti cans I would bet.

[@malcolmpalm]

@@JohnZ556 I hear ya. I have a lot of pews that are pinned/welded with DA, or SCo muzzle devices.

[@calebclark6739]

Why ?

[@jaredandrews379]

Why do you need to take it off so quickly?

[@logandutton]

Would this be a good fit for my LWRC m6ic di?

[@BasementOps]

Review on the Alaskan 360?

[@mjay7238]

Will this fit on a zpap92’s fat muzzle !

[@superboy305]

Just wanted to it on a rattler, thanks

[@vernehughart3546]

Wish they were legal here

[@BlueMushroomSmurfCat]

The tax is crazy too well not that bad but here it’s 200 dollar tax

[@zell666hell]

My friend 3D prints silencers for dirt cheap

[@BlueMushroomSmurfCat]

Is that even legal?

[@rx7addict]

It's not zero back pressure

[@MyCoolFish]

You guy’ses ≠ Texan

[@NoGoBu]

Way way to damn " expensive "
of course, the snobs that spend daddy's money 💰 will say I'm wrong. 🙄

[@StEvEn420BrUlE]

One thing worth noting is that for subsonic ammo, flow through designs are much louder and may have a harder timer cycling it compared to traditional baffles