I got mine just a few days ago and I like it so far print quality is good. My only complaint is the flinging poop lol highly recommend printing the poop catcher. Not a big fan of the slicer either a poorly forked version of PrusaSlicer. It also wastes a lot more filament for multicolor prints than necessary. assembly was definitely a breeze I have assembled a lot of 3d printers, and this was the easiest. But overall I think its a great printer and I am happy with it.
@@Creepy_tales75 the poop catches print is a must! And if I can make a recommendation, use the anycubic beta slicer. It’s based off of orca slicer and is sooooo much better. But I agree with you, one of the easiest printers I’ve set up!
Hi, thanks for the video, how long is the 6 pin cable from the ACE unit to the printer? I will like to set it up over the printer, do you think is long enough
@@simoneala3 it’s only about 3-4 ft long. Anycubic only recommends you set it up on the left side of the printer. Not sure if you’ll be able to set it up on top 😞
Bonjour, Plein de petites questions, le benchy, c'est celui proposé par la marque dans la clé usb ? Si c'est le cas, c'est pas une réussite de leur part ! 12mn seulement pour une telle pièce, il aurait mieu valu la faire en 15 et qu'elle soit parfaite ! Sinon, on n'a rien vu de la partie logicielle, tu as utilisé quoi pour piloter la machine ? Cura ? (beurk) Prusa slicer ? Orca slicer ? Et tu ne donnes pas vraiment de caractéristiques techniques. Je cherchais à savoir quelle est la température max du plateau, mais même chez eux, il n'y a rien d'indiqué !! Sinon merci pour ta vidéo.
Hey there! Thanks for you questions and I’m happy to answer them. They do provide the speed benchy on the usb and yes it’s not perfect. However they do provide a second benchy printer with normal settings that prints in about 16 mins which does turn out perfect! I used both Anycubics slicer as well as the beta Anycubic software which is based off of orca slicer. The user interface of the Anycubic slicer is awesome! However the beta version based off of orca slicer gives you so much more control!
Translated to French: Salut! Merci pour vos questions et je suis heureux d’y répondre. Ils fournissent la vitesse sur l’USB et oui, ce n’est pas parfait. Cependant, ils fournissent une deuxième imprimante de banc avec des paramètres normaux qui imprime en 16 minutes environ, ce qui s'avère parfait ! J'ai utilisé à la fois le slicer Anycubics ainsi que le logiciel bêta Anycubic qui est basé sur le slicer orca. L'interface utilisateur du slicer Anycubic est géniale ! Cependant, la version bêta basée sur Orca Slicer vous donne bien plus de contrôle !
@@cgold1981 I’ve used plenty of 3d printer spools and I’ve had no issues, I’ve even used those tiny 250g spools and was able to print that Spider-Man piece. And yes it does come with a usb drive with some models pre loaded on it already!
@@ElectroMac74 if you use the regular Anycubic slicer, no. But if you use orca slicer, I believe you can set it up to print useful objects instead of printing the purge tower!
@@steveng724 considering this one has the multicolor printing as well as the filament dryer in an all in one package, I think the Anycubic would be your best bet
Hey that was just an example of a benchy printed on the hype speed. A regular benchy turns out perfectly! And I printed the speed benchy once more on a more stable desk, and the print quality has turned out almost perfect! And that’s great that you’ve been able to print multi color prints with one nozzle!
Місяць тому
Essa também faz ruido no eixo Y tal como a Kobra 2?
oh nice it takes the small rolls of filament too! thats exciting i can't wait to set mine up
yup! although not as smooth as using the regular size rolls, still works great and gets the job done!
Users often appreciate the machine's ease of setup and use, as well as the quality and accuracy of the printed products.
Yup! It’s a great printer if you’re just getting started with 3D printing
@@Diy.dopamine_ yesss
I got mine just a few days ago and I like it so far print quality is good. My only complaint is the flinging poop lol highly recommend printing the poop catcher. Not a big fan of the slicer either a poorly forked version of PrusaSlicer. It also wastes a lot more filament for multicolor prints than necessary. assembly was definitely a breeze I have assembled a lot of 3d printers, and this was the easiest. But overall I think its a great printer and I am happy with it.
@@Creepy_tales75 the poop catches print is a must! And if I can make a recommendation, use the anycubic beta slicer. It’s based off of orca slicer and is sooooo much better. But I agree with you, one of the easiest printers I’ve set up!
Hi, thanks for the video, how long is the 6 pin cable from the ACE unit to the printer? I will like to set it up over the printer, do you think is long enough
@@simoneala3 it’s only about 3-4 ft long. Anycubic only recommends you set it up on the left side of the printer. Not sure if you’ll be able to set it up on top 😞
the 12-minute bench I did on it came out almost perfect.
That’s awesome!
I've subscribed because you are Canadian too!
Cheers bud 🇨🇦🍻😉
Bonjour,
Plein de petites questions, le benchy, c'est celui proposé par la marque dans la clé usb ? Si c'est le cas, c'est pas une réussite de leur part ! 12mn seulement pour une telle pièce, il aurait mieu valu la faire en 15 et qu'elle soit parfaite !
Sinon, on n'a rien vu de la partie logicielle, tu as utilisé quoi pour piloter la machine ? Cura ? (beurk) Prusa slicer ? Orca slicer ?
Et tu ne donnes pas vraiment de caractéristiques techniques. Je cherchais à savoir quelle est la température max du plateau, mais même chez eux, il n'y a rien d'indiqué !!
Sinon merci pour ta vidéo.
Hey there! Thanks for you questions and I’m happy to answer them. They do provide the speed benchy on the usb and yes it’s not perfect. However they do provide a second benchy printer with normal settings that prints in about 16 mins which does turn out perfect! I used both Anycubics slicer as well as the beta Anycubic software which is based off of orca slicer. The user interface of the Anycubic slicer is awesome! However the beta version based off of orca slicer gives you so much more control!
Translated to French:
Salut! Merci pour vos questions et je suis heureux d’y répondre. Ils fournissent la vitesse sur l’USB et oui, ce n’est pas parfait. Cependant, ils fournissent une deuxième imprimante de banc avec des paramètres normaux qui imprime en 16 minutes environ, ce qui s'avère parfait ! J'ai utilisé à la fois le slicer Anycubics ainsi que le logiciel bêta Anycubic qui est basé sur le slicer orca. L'interface utilisateur du slicer Anycubic est géniale ! Cependant, la version bêta basée sur Orca Slicer vous donne bien plus de contrôle !
7:56 If you have other 3D printer spools that are not from AnyCubic will it fit in the Ace Pro compartment?
And does the Kobra 3 Combo come with a USB drive?
@@cgold1981 I’ve used plenty of 3d printer spools and I’ve had no issues, I’ve even used those tiny 250g spools and was able to print that Spider-Man piece. And yes it does come with a usb drive with some models pre loaded on it already!
Very reasonably priced for an multi colour enabled bed slinger.
@@monkeysausageclub cheapest one u can find on the market
can you instead of the change color tower print something useful? thanks
@@ElectroMac74 if you use the regular Anycubic slicer, no. But if you use orca slicer, I believe you can set it up to print useful objects instead of printing the purge tower!
@@Diy.dopamine_ thanks for the info
Anycubic could have done so much better with cable management.
Those cables should never have been in the front
@@nekrosoft13 for real!!! It’s the one thing I don’t like about the printer. Other than that, the printer is absolutely amazing!!!
This , the anker make m5c , and the creatility k1c are all the same price. Im not sure which is best.
@@steveng724 considering this one has the multicolor printing as well as the filament dryer in an all in one package, I think the Anycubic would be your best bet
STL?
cults3d.com/en/3d-model/art/spider-man-wall-art-single-and-mmu
@@Diy.dopamine_ OBRIAGDO
el benchy salio feo jajajjaja, yo el spiderman lo hago con un extrusor a un color y los 3 colores en la misma capa desde hace 7 años
Hey that was just an example of a benchy printed on the hype speed. A regular benchy turns out perfectly! And I printed the speed benchy once more on a more stable desk, and the print quality has turned out almost perfect! And that’s great that you’ve been able to print multi color prints with one nozzle!
Essa também faz ruido no eixo Y tal como a Kobra 2?
não, isso não faz barulho no eixo y como o kobra 2. é bastante silencioso durante a impressão no modo normal.
Boa resolveram esse problema pelo que parece@@Diy.dopamine_
STL HOMEM ARANHA