One more tip, to remove the front of the cluster, make sure that you stick a thinner piece of plastic on the top retainer so that it can push down on the retainer and allow you to free it up, that way you don’t break it.
One tip. The cluster connector may be very brittle and crack. So make sure to pull it enough so that you can reach from underneath and use screwdriver to pop the retainer. If you do it from the side, you may crack it, as I did. instead, I found that you can pull it enough, to the point that you can reach from underneath it and use a screwdriver to pull/push the locking mechanism
Thanks!! This video gave me the confidence to order from Venoxy and give it a shot. Two tips: 1) put some painters tape on top of the steer column surround. Scratched mine up a little bit when pull the gauge cluster out. 2) Take a pen apart and use the long hollow shell to get the black retainers out that hold in the factory gauge face. I tried a few different ones, but eventually found one that kind of pinches the retainers together and pushes them through. Made it really easy. Just take your time and go slow. New gauges look great, can’t recommend Venoxy enough.
Followed this guide and did this myself today with new gauge faces from Venoxy. Only got stuck on the little black clips holding in the faces where your method with the screwdriver did not work for me. Worked well to use a small plier and pull in and down though! Thank you for this awesome step-by-step! Made a huge difference for me! And the faces from Venoxy are super quality for the price!
Do you find any of the turn signal lights are dimmer? I bought a 997 with a custom overlay and i can barely tell when the blinker is on. Im considering replacing it..
Great video !! Tedious job. But you broke the top middle clip for the front cluster cover. There has to be a better way for the clips you can’t reach on the top part of the cluster
hi there. I followed your instructions to the letter - thank you for the great tutorial. once back in the car and with the engine running I noticed - sadly - oil pressure gauge doesnt register / neither does fuel gauge/ neither does oil temperature - but I can still measure the oil level electronically - and also using the head unit I can still gauge how much fuel is left. Do you have any advice how I can fix these bearing in mind I took your advice and was very careful making sure that all the connections are connected etc. could be a loose connection perhaps on the plug at the back at the unit or does it need completely calibrating - or alternatively have I just wrecked my perfectly good dashboard cluster for aesthetic purposes ? - welcome to any comment thanks
@@markclark250 hi there. the oil temperature gauge decided to work after a while and now consistently works but both fuel gauge and oil pressure gauge do not. I did follow the instructions correctly in terms of connections etc but in hindsight I keep thinking did I not connect something ?. hearing that you are experiencing similar issues makes me wonder if it is something to do with resetting it like perhaps disconnecting the battery and allowing it to drain before reconnecting maybe? thanks for the advice
@rowenlawrence1797 Pretty sure removing and reinstalling the needles broke the gauges. I ordered a used cluster and plan on swapping the small circuit board from the back of mine to the new one, assuming my VIN and everything is tied to the chips on that board. I actually received the cluster today so I'll swap it this weekend.
@rowenlawrence1797 Just finished. I swapped the removable board from my cluster to the new one and it worked perfect. No errors and my odometer is correct, just as it was but all my gauges work and I got a better lens.
I watched a similar video where the poster didn’t disassemble the rest of the cluster to remove the small black cylindrical clips holding the overlay on. He gently pried and wiggled the overlay from underneath and side to side and they simply freed with a ‘pop’.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
One more tip, to remove the front of the cluster, make sure that you stick a thinner piece of plastic on the top retainer so that it can push down on the retainer and allow you to free it up, that way you don’t break it.
One tip. The cluster connector may be very brittle and crack. So make sure to pull it enough so that you can reach from underneath and use screwdriver to pop the retainer. If you do it from the side, you may crack it, as I did. instead, I found that you can pull it enough, to the point that you can reach from underneath it and use a screwdriver to pull/push the locking mechanism
Professional work, thank you!
Thanks!! This video gave me the confidence to order from Venoxy and give it a shot. Two tips: 1) put some painters tape on top of the steer column surround. Scratched mine up a little bit when pull the gauge cluster out. 2) Take a pen apart and use the long hollow shell to get the black retainers out that hold in the factory gauge face. I tried a few different ones, but eventually found one that kind of pinches the retainers together and pushes them through. Made it really easy. Just take your time and go slow. New gauges look great, can’t recommend Venoxy enough.
It is one heck of a project! I hope to only do one lol Glad you got yours done! Thanks for the view!
Agreed onto the pen. You can also use a small socket, just big enough to pinch the retainers
Agree a sock would work too. I think the pen shell gives you more to hold onto, but do whatever works best.
That yellow gauge looks really good though not gonna lie!
The end result was pretty awesome!
Final tip, use two small spoons together to pull the needles off.
Followed this guide and did this myself today with new gauge faces from Venoxy. Only got stuck on the little black clips holding in the faces where your method with the screwdriver did not work for me. Worked well to use a small plier and pull in and down though!
Thank you for this awesome step-by-step! Made a huge difference for me! And the faces from Venoxy are super quality for the price!
Those black clips are the worst! lol Glad I could help some and thanks for the view!
thanks mane super helpful!!!
Thanks for the view!
Amazing work!! It makes me want to try it one day!
It is a massive project! But the results were great! Thanks for the view!
Do you find any of the turn signal lights are dimmer? I bought a 997 with a custom overlay and i can barely tell when the blinker is on. Im considering replacing it..
Thank you for this video!
Glad it was helpful! Thanks for the view!
Great video !! Tedious job.
But you broke the top middle clip for the front cluster cover. There has to be a better way for the clips you can’t reach on the top part of the cluster
Yeah it was a really really horrible job to do! I'm sure someone that has done more has a lot better methods. Thanks for the view!
hi there. I followed your instructions to the letter - thank you for the great tutorial. once back in the car and with the engine running I noticed - sadly - oil pressure gauge doesnt register / neither does fuel gauge/ neither does oil temperature - but I can still measure the oil level electronically - and also using the head unit I can still gauge how much fuel is left. Do you have any advice how I can fix these bearing in mind I took your advice and was very careful making sure that all the connections are connected etc. could be a loose connection perhaps on the plug at the back at the unit or does it need completely calibrating - or alternatively have I just wrecked my perfectly good dashboard cluster for aesthetic purposes ? - welcome to any comment thanks
Any luck? After doing this my oil pressure and temp don't work either..
@@markclark250 hi there. the oil temperature gauge decided to work after a while and now consistently works but both fuel gauge and oil pressure gauge do not. I did follow the instructions correctly in terms of connections etc but in hindsight I keep thinking did I not connect something ?. hearing that you are experiencing similar issues makes me wonder if it is something to do with resetting it like perhaps disconnecting the battery and allowing it to drain before reconnecting maybe? thanks for the advice
@rowenlawrence1797 Pretty sure removing and reinstalling the needles broke the gauges. I ordered a used cluster and plan on swapping the small circuit board from the back of mine to the new one, assuming my VIN and everything is tied to the chips on that board. I actually received the cluster today so I'll swap it this weekend.
@@markclark250 hi there, I look forward to seeing your results cheers
@rowenlawrence1797 Just finished. I swapped the removable board from my cluster to the new one and it worked perfect. No errors and my odometer is correct, just as it was but all my gauges work and I got a better lens.
Hi. Do you still have the original overlays? Mine are white S model, and would like to go to Black versión.thank you
It is my friends 911 but I would assume he kept them. Thanks for the view!
Did you purchase the sports Chrono yellow face at venoxy as well?
Yes they came from venoxy. Thanks for the view!
Five words to my Indy”Call me when it’s done”. I’m not an idiot but that seems like something I could F*@# Up
There was A LOT of stuff to mess up in there! lol Thanks for the view!
This is the kinda thing a shop will never do as meticulously as I could do, you must be a savage
What steering wheel and hub setup is that?
Here was a video on the steering wheel swap. Thanks for the view!
ua-cam.com/video/qOhXnnaXC4A/v-deo.html
I watched a similar video where the poster didn’t disassemble the rest of the cluster to remove the small black cylindrical clips holding the overlay on. He gently pried and wiggled the overlay from underneath and side to side and they simply freed with a ‘pop’.
That would have saved a lot of time! But I would be worried I couldn't get the new overlay to fit correctly. Thanks for the view!
That would’ve sucked if he said he wanted a different color after putting all back together lol
Yeah no way lol that was the first and last time I'm doing this job! Thanks for the view!
I just got the gauge face and I forgot I don't own a porsche
Me either! I just have to use my friends porsche's lol Thanks for the view!