Rekluse RadiusX Auto Clutch KTM 790 Adventure R Installation

Today, we install a Rekluse RadiusX auto clutch in a 2019 KTM 790 Adventure R motorcycle.
Rekluse's EXP technology eliminates stalling, reduces arm fatigue and is tunable for different riding styles. Learn more about it at rekluse.com/pr... .
Their TorqDrive technology provides greater torque capacity through the use of more friction disks increasing performance and durability. Learn more about this here: rekluse.com/pr... .
For more information about Tapped Out Cycles (including online ordering!), visit:
www.tappedoutc...

[@1ARMBOB]

It’s awesome. I bought a 2020 KTM Duke 790 and added the rekluse clutch and I love it. I drive my bike with only one arm so my throttle, clutch and brake are all on the left side and this makes my life so much easier. I still like to use my clutch at times when I come to a complete stop but I guess I really don’t need to. I love it.

[@markthibaudeau9120]

Nice video well instructed. Have not seen such clutch. A video of it in action would be nice.

[@tappedoutcycles2757]

Thanks and i can try and add something at the end showing the rekluse in action.

[@ADViators]

I've watched this video quite a few times to setup my installed gap. The instructions from Rekluse aren't that clear. After fully collapsing the clutch cable adjuster and 3-4 threads on the lower in-line cable adjuster I'm supposed to "Using a T30 Torx, loosen the clamping bolt on the throwout arm. Rotate and the shaft counter-clockwise
with a flat screwdriver while turning the arm clockwise.
Tighten the clamping bolt with the arm and shaft in this
position." However, after doing this the clutch is basically fully engaged where in your video the arm still has movement, mine does not... Realize this was three years ago, any tips? 😊

[@dannywade1783]

What are they chopper style footpegs on that thing I want some.

[@romcmn9039]

Thanks for the video, very clear, and very interesting gear (no pun intended)!
I was wondering if there is any compatibility problem with the quickshifter?

[@tappedoutcycles2757]

Thanks for liking the video and hope it was helpful. We don’t know of any issues regarding compatibility or interference with the quick shifter. This set up can be utilized just as a regular clutch with the added benefit that if you were to come to an abrupt stop, the unit would not stall out.

[@jaws2858]

Great video!

[@PAKAYODA]

Do you install without clutch washer? Or do you put on the clutch after insertion?

[@CJCFCO]

Don’t Buy if you’re going on an adventure ride!! It’ll leave you stranded

[@CJCFCO]

Great hot too though

[@alexmaccity]

Nah, nah, nah, nah, nah, nah, nah.

[@javierc2726]

This is terrible filmed

[@tappedoutcycles2757]

Thank you. Since you have so much time on your hands, why not offer some help on editing or something constructive?