A&A Supercharged LS3 C6 Makes Killer Power! | RPM S8 E47
Вставка
- Опубліковано 17 жов 2024
- On Today's Episode of the RPM Web Series, we put the V3 back on the dyno for some updated numbers. We have a 2013 C6 (auto) that we built 5 years ago come back for a re-tune and we continue work on the Kong 2650 Zr1 build.
Don't forget to subscribe to stay up to date on our weekly videos, events, and track days!
For specific questions regarding installs, packages or dyno tuning send us an email at Sales@raceprovenmotorsports.net
www.raceprovenm...
Merch - raceprovenmoto...
Instagram @raceprovenmotorsports
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Performance shops with integrity are hard to find.. much respect to you guys, Crazy to think they quoted him for a new motor with a rattling cat...keep up the great work.
11:42 "D.Y.I. that's how it's done!" 😂😂😂 Never thought I'd enjoy watching a bunch of guys working on vehicles this much even though I'm not turning a wrench. ✌🏾
lol same here!!! these dudes are geniuses.
MAY THE LORD BLESS YOU....Coming from a guy who had a “performance shop” replace the motor in my GTP in 2007 to find out that it was just a messed up cat.
I hope the camera guy gets a lot of love in the shop and in the comments. He does a great job!
Zero love in the shop.
@@RaceProvenMotorsports hahaha yall crack me up! Another great video (in part via the camera guy)
I am fairly certain, that if I take my C6 any farther...I will ship it to RPM. It is just a cam behind that one. Thanks for the killer content. Top notch videos and general conversation...very entertaining and informative.
Mechanic.....inventor.......singing sensation .....mustang Matt 🤟
Nothing like cam chop in the morning. Good day from Burbank!
That V made big power!! Can’t wait to see the ZR1 with the 2650 from Kong
Love when you say Codys broke...Fran said it runs 8s,.. gotta pay to play!! I'm still looking for a "good" C6 ZR1 keep it up great work!!!
@10:22 you people dont realize how genius this is. steve well done sir. you planned to do that smooth transition into the hood to close the day and then roll out of the hood for the start of the new day. what i bet most people didn't realize was that it really was a new day!!!!! haha, i feel like so many people missed that. and then to make it even better, matt made fun of you for coming in from the front he's like "why dont you come from the rear", not knowing that you actually just completed an artistic entrance and then eric in the back calls him a hater. hahahahahahaha omg the beauty of this is amazing.
i'll only bring my car to you guys if you let me come hang out with my car while you guys work on it. :) yall are fucking hilarious
It always pays to get a 2nd opinion. Keep Dr. Fran on speed dial. 👍😉
You know it a wander anyone gets any work done with Steve aggravating the shit out of the guys that are ACTUALLY working 😂 👍
That gen3 Cadillac CTS-V is a monster. It's crazy how many shops will tell a customer what they assume is wrong. Without actually going through to verify. Even though RPM has a policy of non putting people on blast. These videos are evidence enough that you get what you pay for. Especially when you are looking for cheap. Instead checking to see if the shop knows what they're doing.
Not gonna lie. I'd be first in line for one of those LS crank rotation tools. That's sick.
Luber up and slide it in! Its all about the cam shot!
That CTS V was absolutely beautiful
Buddy just had final tune done on his C6 with A&A supercharged LS3. 18° timing at 25psi boost. Made 978whp 854ftlbs
What pulley and rib
Definitely fully built engine and a ysi supercharger
Fran, keep up with the awesome work bro. Chevy power all the way!!!!!💪🏻💪🏻🤘
whoa good save on that guys "rod knock"...
14:40 is that blower slightly over-revving itself at the peak on that pull? Never heard that kind of metallic bearing noise before on a pull, so just curious what that is. Maybe just a harmonic?
What size pulley is on the A&A kit? Thank you for your time in answering its greatly appreciated
"This is my LS7 crank rotation tool." -I spit beer everywhere
Bleeding a clutch...why did you cut it out of the video...would of liked to see how its done...ya I know its boring but it is kind of interesting if you have never seen how its done...I watch this channel cause I want to learn something about corvettes..You guys do a good job...keep up the good work...
Matt has been on a roll..🤣🤣 more like angry funny Matt..🤜🤛
Matt, “the songbird of his generation.” “Like a mixture of Fergie and Jesus!” 🤣🤣
What is the difference in size/and power output between an A&A kit vs procharge f1a94
The A&A is better at making power. Depends largely on your tune, but I'm guessing 35+ RWHP with the A&A over the procharger running on a good tune.
Ahhh those cam bearings... Lol gotta love the internet 😂
Oh god the v .998hp I'm in love😍
Old video but curious if anyone knows what tires are running on the black base C6 with the A&A supercharger? 305's out back?
Matt needs to weld a 3/8 or 1/2 “ drive tab on the oil pump gear so you can use a regular snap on ratchet of your choice
I have an Ls7 i have had the valves inspected and fixed on the stock heads. Do i need to continue to worry about valve drop? If i go with you heads cam package do i still have to worry 50,000 miles from now about this issue?
We have never had a single issue on any car we have fixed. We have been fixing them since 2009
Gotta ask!!! What do you do with all the cams and blowers that are own and replaced with aftermarket? Do you give them back? Keep them and sell them?
Give them back
RaceProvenMotorsports I was just thinking what a money maker rebuilding/porting heads and Lsa blowers would be! If you guys offered a small discount and scooped up ls3/ls7 heads and manifolds you could sell them factory cast. Most people might not even know what to do with any of the used parts
22:00
Matt: we're gonna do meth?
I know he means methanol not crystal meth
But his face fits choice number 2
Do you send C6 out for alignment after clutch replacement?
I actually saw that Rolex Oyster watch clip too. He deserved it.🤗
I have a question off topic if you don't mind, I have heads, cam, E85, I get quite a bit of fuel smell, is this normal are can this be fixed with proper tune ?
Any advise would be appreciated !!!
The slow motion of dyi freaking great this vid was great just LMAO 🤣😂😁🤣😂🤗🤗
No classes today so morning is starting out well
turning motor backwards?
are those stock rims on the ZR1?? if not who makes them??
Once again excellent job.
Damn that white #V3 sounds amazing!! Good laughs too!! Monster triple!!! 🇺🇸💪🇺🇸
Weld the crank thing to a big socket then you can use a ratchet
What pulley and rib?
DYI = do your install
DIY= do it yourself
Got the E1-E9 ranks wrong , corporal and specialist are both E4 then E5 is sergeant and then SSG but it’s okay I love these guys and they are a performance shop not military 😂😂👍🏽
Just googled copied and pasted
my c6 sounds like that "fake cam" sounding zr1
What size injectors?
What's with the "Multiple Meeks" hand gestures?
Just weld that pump drive to the end of a deep socket,problem solved.
nope, you weld a bunch of of the gears on top of eachother, weld a flat steel to the bottom, and then weld a half inch socket onto that plate. boom.
23:13 ... I'd buy one especially when it gets the ratcheting action.
Informant for the CIA. Cam Install Association
Making Corvettes Great Again
Weld it to one end of a nice looking wrench
Boy i am old i remember when my E3 pay was 618 a month 🤣🤣🤣
Sheeeitt, son....IIRC, back in `68, PFC pay was $214, plus $55 a month combat pay. The upside: smokes were $1.90 a carton (!) at the PX....
Sbe for 5 years?
Two videos in season 8 show private not sure if their new or not
They are next weeks episodes they will go live on Wednesday & Friday
Previously, on Avatar
Dude weld a socket to it and u can use a ratchet
I was about to suggest the same thing
Seeing eric laugh like that had me dying. #notsoangryeric
Only 3 haters Not bad for the day...
I dont understand how that zr1 with the stock cam sounded so choppy?! Someone explain?
Kolby Humbert if it’s tuned you can make a stock cam choppy
Ethanol runs cooler than pump gas and it won't burn as efficiently when cold. The chop goes away once it's warmed up
Do you guys work on ls1 *2000 Z28 Camaro *
No
RaceProvenMotorsports damn thanks 🙏
Everyone knows it’s, Do Yourself It...... DYI 😂
Cornfed, I hope it's all up hill from here. I'm still awaiting Fletcher's V to be completed as well. Ucountry has good numbers.
That plate said u can try ...I thought the same as you at first
Oh to be a fly on the wall at this shop! Lol I would probably pee myself on the daily
rip to these kinds of vids
Nice!!
I love it my guys rpm keep up the work and love video and I love CTS V beautiful 💯💯💯💯
A CUP!!! 😂😂😂
Whats the blue film called
raceprovenmotorsports.net/products/blue-fender-wrap-24-x-200?_pos=1&_sid=4180efdd0&_ss=r
Can y’all get my stock 2018 Escalade to make 1000 whp?
Of course, anything is possible with enough money.
RaceProvenMotorsports roughly how much we looking at? You guys source everything. I will take care of shipping.
40k or so
RaceProvenMotorsports that’s a damn good price!!
It makes me laugh when I see a civilian totally fuck up the the rank structure. 06:36
Enlisted ranks are incorrect😬
Morning!
Paint it black!
Steve; " I'm not a stock C6 guy ." So what kind of Corvette do you have , Steve ?
Orion Fixr I’m poor I can’t afford a car
@@Bsaint ; I walk a lot too . ( ssssss ! )
Dyno 997, insert Nancy Pelosi tearing dyno sheet
WAIT WAIT WAIT informant for the????fbi mossad?
D.I.Y Mathew!!!!!!
Imagine... spending 12k on a Motor only to find out it was a cat... ... ...
I thought boosted ls3s make more power than boosted ls7s
Emmanuel Tembo LS3s can handle more boost than an LS7. Also Ls3s aren’t 12:1 compression. No one ever said a boosted Ls3 make more than a boosted ls7.
RaceProvenMotorsports how much boost do u run on a 12:1 motor with meth?
The 'previously' opening has played itself out....100 episodes ago
That’s crazy you definitely don’t want some moron even detailing your car that believes the motor is bad due to a rattling catalyst.🤯🤯🤣🤣
Nice little editing trick Steve, And KP is still funnier than you.
And my car is faster than yours to Steve.
waltmann66 congrats 😂😂😂 not hard to do
What do you think that base c6 with the a&a kit would need to hit 700rwhp
It was only on 10.7lbs of boost. So at 12lbs easy 700.