@raceprovenmotorsports Why are your videos Sooo Loooooonnnngg?? 😤🤷♂️🤦♂️👎You can show what's been done that's all fine. But the useless talking between everyone TAKES FOREVER 🤷♂️🤷♂️ I'VE NEVER WATCHED A FULL VIDEO BECAUSE OF THIS. Why don't you show main parts of the installation and cut out most of the talking and useless bits of the video? FRAN, TELL YOUR CAMERAMAN TO SHORTEN THE VIDEOS PLEASE. This way people will watch the videos all the way through till the end including the for ads and not bail halfway through the video because tired of waiting To see what the title of the video was all about💥💥💯💯
I always got a big chuckle whenever a guy would say he put a 3/4 race cam in his motor. I'd always come back with " I put a 7/8ths race cam in mine!" The looks were priceless.
Fran talking like we did as teens in the 60/70's about 3/4 race, on the canary yellow, or full race cams, Isky, Crane. Lift so tall if you off you could break your neck, lope so slow you think it died. Cherry Bombs, Thrush Header mufflers, Hush Thrush mufflers, Capped or uncorked cutouts. Language of the day.
That C6 Grand Sport was a screamer. Without a doubt the 6th gen Camaro ZL1 is the meanest looking Camaro ever. I am curious to see what Fran has in store for his racecar.
It was strange hearing a c6 vette with a stall like that on the dyno almost all the c6 content we see is Z06 cars with a manual. Most stuff you guys do like the C7Z cars with an auto seem to use stock converters or what sounds like a stockish stall. They never hang like that forever riding on the converter
The guy who tuned my tbss locked the converter in 3rd for dyno pulls when he was tuning it. I didn't even know that was a thing. Didnt sound like fran did it here. I wonder what the difference is
Can't wait for Friday. Nice to see Frans car is getting ready for the season when it opens up. Really want to see what he's done to it. Glad too see Angry is back. Steve still lovin a shaft lube.
yeah the cam shot it getting strange , weve seen it enough , i want to see some street tuning , or bs with bill or fran when hes not tuning . Less cam shots.
6psi, pump gas. Pistons that have rings and top land that isn't boost friendly. Realistically you don't want to push much harder, and most tuners don't want an engine explosion on their resume'
Anyone else notice that the C6 (LS3) with TSP Cam, Nitrous (150 shot), dedicated fuel system, 102mm FAST, Kooks exhaust and 102mm NW TB on C16 made the same power as a heads cam, intake and headers LS7 on pump?
Make sure you watch until the end to see a sneak preview of what the next episode is going to have in it ;)
YES, Bout dang time
Yeeeeeessssssss this is gonna be dope
I got you rpm
@raceprovenmotorsports Why are your videos Sooo Loooooonnnngg?? 😤🤷♂️🤦♂️👎You can show what's been done that's all fine. But the useless talking between everyone TAKES FOREVER 🤷♂️🤷♂️ I'VE NEVER WATCHED A FULL VIDEO BECAUSE OF THIS. Why don't you show main parts of the installation and cut out most of the talking and useless bits of the video? FRAN, TELL YOUR CAMERAMAN TO SHORTEN THE VIDEOS PLEASE. This way people will watch the videos all the way through till the end including the for ads and not bail halfway through the video because tired of waiting To see what the title of the video was all about💥💥💯💯
I would love to see you guys do have a special with only your personal project cars.
I always got a big chuckle whenever a guy would say he put a 3/4 race cam in his motor. I'd always come back with " I put a 7/8ths race cam in mine!" The looks were priceless.
Matt taking out the cam and lubbing up the new cam is very satisfying
Fran talking like we did as teens in the 60/70's about 3/4 race, on the canary yellow, or full race cams, Isky, Crane. Lift so tall if you off you could break your neck, lope so slow you think it died. Cherry Bombs, Thrush Header mufflers, Hush Thrush mufflers, Capped or uncorked cutouts. Language of the day.
That red C6GS is fracking rowdy! Love it
That C6 Grand Sport was a screamer. Without a doubt the 6th gen Camaro ZL1 is the meanest looking Camaro ever. I am curious to see what Fran has in store for his racecar.
I was starting to wonder where my RPM content was to keep me sane on a Wednesday stuck at home. Thanks guys! :)
It was strange hearing a c6 vette with a stall like that on the dyno almost all the c6 content we see is Z06 cars with a manual. Most stuff you guys do like the C7Z cars with an auto seem to use stock converters or what sounds like a stockish stall. They never hang like that forever riding on the converter
The guy who tuned my tbss locked the converter in 3rd for dyno pulls when he was tuning it. I didn't even know that was a thing. Didnt sound like fran did it here. I wonder what the difference is
I wanna go on vacation and stay at the work shop watching parts installed and listening to the LS's while they run on the dyno
Sounds really good guys grandsport its badass you guys allways sharing the cool.
Staaaap lol !!! 3/4 race cam got me.
That cam idle on red vette on gas sounds tuff
that GS sounds really good.
Best video y’all done with the trolling! I’m dying. Love this channel. Makes me miss my Z :(
I'm going to put my seat-belt on....LMAO
Chevy gang all day. Love Grand Sport love nitrous love Eric 💯💯💯💯💪💪💪💪
Can't wait for Friday. Nice to see Frans car is getting ready for the season when it opens up. Really want to see what he's done to it.
Glad too see Angry is back. Steve still lovin a shaft lube.
Fran is definitely the Mad Scientist when it comes to tuning these cars!!!!!
This is literally the next step where I want to take my GS.
Awesome video!
10:55 LOL! In some random future video, Fran should have the seat belt on to see how many people ask WTF?
Cant wait to see the Race car update!
Yeeeee!! In for new sound measuring device and first N2O car in forever.....
I love it my guys rpm and keep up the work and I love the video and I love c6 z06 💯💯💯💯💯💯
Loving your channel, all sorts of great builds. Do you guys have any stock C7 with nitrous dyno videos?
he made it!!!!!You're on a gravy train with biscuit wheels
YES ! The race car !!!!! Finally
Best quote on the internet period, "I'm gonna put my seat belt on".
3/4 race cams I thought they quit making those and only make full race cams now LMFAO 😂😂😂😂
What brand under hood light does Eric and Matt use?
Would be really cool to see all the guys cars at rpm
yeah the cam shot it getting strange , weve seen it enough , i want to see some street tuning , or bs with bill or fran when hes not tuning . Less cam shots.
Cumshots
Lol Fran im going to put my seatbelt on ... I would it's got 3/4 cam .lmao
Excellent....can’t wait!!!!
has those header things on it lol
Yes the red beast . Friday come on
Do throttle bodies actually make a difference?? I always here arguments on both sides?? I Need a corvette ASAP, they’re awesome . Love the c6s💪🏻
They absolutely make a difference IF there is a need for it. On a mostly stock car, not so much.
Glad to see KP. Can't wait to see her back in the kitchen.
Do you spray when trans tuning?
No
Is Kitchen still around?
yup sitting in the back of the shop awaiting for tracks to re-open.
Eric needs a haircut bad 😂😂
So Z06 with a blower made 675 is that normal? It seams like it would make over 700 easy?
6psi, pump gas. Pistons that have rings and top land that isn't boost friendly.
Realistically you don't want to push much harder, and most tuners don't want an engine explosion on their resume'
It also has a mild cam and non milled a ported heads. Our Heads Cam package with the same blower makes 700 + no problem on the same boost.
Are Matt and Eric the only two guys wrenching in that huge shop??
Yes
RaceProvenMotorsports that is impressive! Those guys are knocking out work.
You guys are a riot, speaking in clueless dialect about upgrade equipment lmbo
I forgot it’s Wednesday! 👏🏼
B3 is not a 3/4 cam it's a hogass cam
Nice!! Stay safe... :-)
3/4 RACE CAM!!! LOL
Oh here
Anyone else notice that the C6 (LS3) with TSP Cam, Nitrous (150 shot), dedicated fuel system, 102mm FAST, Kooks exhaust and 102mm NW TB on C16 made the same power as a heads cam, intake and headers LS7 on pump?
Corey Wharton The car is cam only, stock heads.
I mean a *427ci* LS7 heads/cam/intake will make 600whp. I'm not seeing your point here.
Cali I don’t see the point
465...... yea needs a bigger cam.
Out of an auto LS3... that’s one of the higher numbers out there for cam only.
RaceProvenMotorsports what are the specs of the cam
Who’s that girl... it’s jessss
That’s KP...
RaceProvenMotorsports who’s KP😮
🤣🤣🤣🤣🤣
Is she pregnant?