As far as the front end: Lower spoiler/fog light housing, fog lights and brackets are all easily sourced with Britpart parts. The headlights are standard Jeep 7" 3 prong units that are plug and play. Old style incandescent bulbs are junk but Halogen ones look the part but put out proper light. Oh, build up the front spoiler with the fog light and brackets already in place with the brackets loose, then install it as a unit and tighten up. EbayUK for the center console parts, rear bumper and bumper end caps. Thanks for the update!
You have put alot of work and effort in lads and there is now light at the end of the tunnel with it love the chanel love the content you guys do a great job and for you guys at transformotion have a great Christmas 👍
You’ve done so much work to this Range Rover, it would be a shame if it wasn’t able to be completed. Although I’m pretty sure Matt will want it finished, he is as enthusiastic with Range Rovers , as I am with Škoda’s❤.
Get the mechanics good. Lights. See if it will MOT. If it needs on. Send it. It needs inside storage now. And detailing. You did a fine job Gents. It's really a winter beater. And send it in for panels in spring.👍👍✌️they was made for driving gent. Go drive that thing. Have some fun down Spain. Join the off road clubs. Adios. ✌️
A great update video. Its looking boss. That colour suits it perfectly. Im envious of Matt. He bought a great vehicle. Sorry to hear that Andy's Toerag is not working. Best thing hes doing is selling it. Whats he planning to replace it with?
Nice to see the Range Rover again you’ve done well so far on this hopefully you can get all the missing trim etc matts deffo going to overspend with this 😂
Sounded like classic maf problem in the clip where as the engine warms up and revs fall to around 500, the ecu looks for input from maf and if maf is faulty it stalls or just manages to stay alive and then runs on default values. Mine does the same thing. So working maf and ignition timing and you're away!!
Hi guys. I know people don't like brit parts but about 5 years ago car SOS did one of these at the Brit Part factory. All those parts you were talking about were available then from them then. I guess they still are. Have a good week. Marc from Australia 🇦🇺
There is a land rover place in Darwen with lots of random stuff on the shelves. Check them out, I purchased some lift bags for my P38 at very competitive prices. Worth a shot
Like you say its up to Matt if he wants to go any further but considering the amount work you have both done so far let's hope he gives you the go ahead to complete the job,it would be good to see it once completed All the very best to you both Tim 😉
Hi lads, You were saying stuff was missing from inside the vehicle, can someone take interior photos of a standard one for comparison for you?, also if every panel is dented couldn't you repair those and just get the vehicle wrapped ( would it be cheaper?),🤔🤔🤔
mats range up too next stage your car i know this may sound stupid but have you changed or think it may have something todo with the break switch under the break pedal they do strange things when they go ❤
Regarding the VW, Why don’t you have a word with Milligan Auto Diagnostics, he’s in Glasgow area, but shit hot on fault finding, be good content if you can get him down here or take up to him.
Whatever you have invested so far it will take the same again to get this vehicle to a decent level of completion. If you intend to keep it long term.. Seriously these boys are not the people to deal with the details in this build.. With the greatest respect these vehicles need period Range Rover experts - not chancers or modern Land Rover box tickers.. You need to know your subject..
Lovely to get an update lads, I’m enjoying its journey. Hopefully Matt wants to keep going. 😊
Get Matt to take it to Jimmy the magician
It needs a magician to fix that bodywork ha ha 😂
Hahaha
As far as the front end: Lower spoiler/fog light housing, fog lights and brackets are all easily sourced with Britpart parts. The headlights are standard Jeep 7" 3 prong units that are plug and play. Old style incandescent bulbs are junk but Halogen ones look the part but put out proper light. Oh, build up the front spoiler with the fog light and brackets already in place with the brackets loose, then install it as a unit and tighten up. EbayUK for the center console parts, rear bumper and bumper end caps. Thanks for the update!
Thanks for the update, still quite a list of jobs to do! Can't wait to see it finished.
Come on Matt don’t leave the lads in limbo - surely he’s put too much into it already to not get it finished to a good standard. Great job lads 👍
Nice one Mike 👍
That off road video was funny defo worth watching ❤ I’d love to see the range rover complete its come so far
You have put alot of work and effort in lads and there is now light at the end of the tunnel with it love the chanel love the content you guys do a great job and for you guys at transformotion have a great Christmas
👍
You’ve done so much work to this Range Rover, it would be a shame if it wasn’t able to be completed.
Although I’m pretty sure Matt will want it finished, he is as enthusiastic with Range Rovers , as I am with Škoda’s❤.
Get the mechanics good. Lights. See if it will MOT. If it needs on. Send it. It needs inside storage now. And detailing. You did a fine job Gents. It's really a winter beater. And send it in for panels in spring.👍👍✌️they was made for driving gent. Go drive that thing. Have some fun down Spain. Join the off road clubs. Adios. ✌️
Great job so far Boys
A great update video. Its looking boss. That colour suits it perfectly. Im envious of Matt. He bought a great vehicle. Sorry to hear that Andy's Toerag is not working. Best thing hes doing is selling it. Whats he planning to replace it with?
Get it sorted ASAP 🎉🎉🎉
Try running ROVERGAUGE on a laptop may have to buy cable about £30 then will be able to see engine maf parameters in real time
Nice to see the Range Rover again you’ve done well so far on this hopefully you can get all the missing trim etc matts deffo going to overspend with this 😂
Thanks for the update on the old Range Rover lads.👍
Even if half the stuff on the VW doesn't work, at least it looks good (from a distance) Andy. 🤣
Ha ha its not a bad looking beast like, let's hope the new bcm sorts it...youre welcome too 😀
oooh! surprise update! 🥰
Ha ha im glad someone got excited about it ha ha 😂
It could be the shed for Christmas 😂😂😂😂😂
Come on lads/Matt sort out your problems and get it over the line 🤷🏻♂️👍🏻 we’re all waiting patiently to see the end result 😀👍🏻
Be good to see this finished off with a good paint job. Matt needs to give you a free rein to finish it off 👍🏻
Id love to see it drive away freshly painted running sweet and matt with a big smile on his face
BTW merch arrived yesterday guys. Thanks for the freebies too 👍🏻
We see it as other motors come and go. Nice to have a recap.
Ha ha its like the channel ornament 🤣
Nice one guys
Sounded like classic maf problem in the clip where as the engine warms up and revs fall to around 500, the ecu looks for input from maf and if maf is faulty it stalls or just manages to stay alive and then runs on default values. Mine does the same thing. So working maf and ignition timing and you're away!!
up to mat at end ov day lads still needs quite abit doin on it depends on how deep is pockets r keep up the great work next video please
It is! We'll see what he says thanks mark
Try paddock motor spares in Matlock
Hi guys. I know people don't like brit parts but about 5 years ago car SOS did one of these at the Brit Part factory. All those parts you were talking about were available then from them then. I guess they still are. Have a good week. Marc from Australia 🇦🇺
Yeah they have all sorts, most of our stuff has come from there, but they don't do lucas maf's
There is a land rover place in Darwen with lots of random stuff on the shelves. Check them out, I purchased some lift bags for my P38 at very competitive prices. Worth a shot
Like you say its up to Matt if he wants to go any further but considering the amount work you have both done so far let's hope he gives you the go ahead to complete the job,it would be good to see it once completed All the very best to you both Tim 😉
Yeah you're right! Id love to see it drive away complete and a happy matt 😊 thanks tim
Charchhouse classics on you tube, Richard rebuilds them and has a fair few spares !
We've see him, I dont think he's local to us tho
Hi lads,
You were saying stuff was missing from inside the vehicle, can someone take interior photos of a standard one for comparison for you?, also if every panel is dented couldn't you repair those and just get the vehicle wrapped ( would it be cheaper?),🤔🤔🤔
mats range up too next stage your car i know this may sound stupid but have you changed or think it may have something todo with the break switch under the break pedal they do strange things when they go ❤
I’m sure Kingsley would have all the spares you need .
Park it next to your Capri it’ll look brand new 😂😂😂😂
Sell the VW to Matt, he’s used to massively overspending 😂
Are the panels as ropey as the Vito 😅 I hope he sticks with it 👌
There nearly as bad as the vito 😂😂
@TransformotionVR it's savable then 💪💪
🤣🤣
Try piro fuse ever unplug it then plug it back in or replace it
What for? The touareg or range rover?
@@TransformotionVR touareg
Worth a look at
you can buy body panels BUT they aint cheap
How do you bill that ?? Per hour. 😂
Regarding the VW, Why don’t you have a word with Milligan Auto Diagnostics, he’s in Glasgow area, but shit hot on fault finding, be good content if you can get him down here or take up to him.
Guys how do I contact you without putting my contact details in the chat?
Hey mate, you can shoot us an email - jono@transformotionvr.co.uk
Or message us on Instagram - Transformotionvr
Whatever you have invested so far it will take the same again to get this vehicle to a decent level of completion. If you intend to keep it long term.. Seriously these boys are not the people to deal with the details in this build.. With the greatest respect these vehicles need period Range Rover experts - not chancers or modern Land Rover box tickers.. You need to know your subject..
Why didny take it to my mechanic. 👩🏽🔧 he missed out there. Scrap
I can see Matts car on Google earth
🤣🤣🤣 ha ha belter that mate 👌 🤣
Try Jj's VW audi centre in Wigan,the owner is John he is brilliant
I've already ordered one now bud
That car is going to be like Trigger’s broom 😂
Not heard from you in a while john ha ha 😉 hope you're good 👍 it sure will 😁
Still watching, just rarely comment. The underneath of the Range Rover looks well.
Thanks man! 😉