Woodworking-How to make a charcuterie board
Вставка
- Опубліковано 8 вер 2024
- In this video, watch how to make a charcuterie board or a small cheeseboard. I used figured walnut for this, hope you like it!! I'll leave links below for everything i used.
Thanks,
Bruce
Links:
Alumilite resin: www.alumilite.com
Howards finish: www.howardprod...
Love how you took a beautiful organic live edge glueup and made it into a simple nonorganic looking piece.
Thanks!
A fella working out of his garage, who hasn't spent $50,000 on tools. Thanks for posting!
Thank you Dave! Your welcome, glad you liked it!
Beautiful work and nice grains color beautiful finishing
Thank you very much Gaetan!
Your Mom thinks you do such good work....lovely
Thank you momma, LOve ya!!
Number one comment!! :-)
God job. Beautiful finish
Hi Helen, thank you so much!
Great video, love the tip on spraying/sanding to prevent raised grain. Can’t wait to implement that into my work and see what a difference it makes.
Hi James, thank you! Yes it makes a big difference, I actually spray it twice, sans back lightly with a higher grit than last used! Thanks for tuning in!👍🏻👍🏻
Very cool! My Grandparents had a board something like this, and I never knew what it was called.
Hi Carol, thank you very much!
Nice job Bruce. Looked great I will have to try it out
Thank you John! 👍🏻👍🏻
Thanks for the very informative video. Amazing how it looks when finished.
You’re very welcome Ron! Yes, once that oil hits it, the grain really pops. Glad you liked it!👍🏻👍🏻
Looks great Jordan!
Hi Bailey, thank you !
Love me some charcuterie!! Nice Job Bruce!
Hey Kris, thanks buddy!...Me too!
What a beautiful piece of wood to work with. Nice job. It’s fun to mix it up once in a while.
It really is! Thanks for checking it out Darren!
Lovely job 👍
Thank you! 🙏🏻
Nice job Very Beautiful Piece Bruce!
Thank you buddy, appreciate you watching!!👍🏻👍🏻
Great choice of wood B. It came out awesome! V...
Thank you Mike, glad you liked it, appreciate ya!
I was thinking the board would looker better a little thinner..then the redesign! Looks great.
Hi Vincent, thanks buddy! Liking the redesign!...Bruce
Great project!!!! I am hoping to do some of these when I get my shop built.
Hi Daniel, thanks buddy! Do it, they are fast and easy!
Good executive decision. Way nicer design. 👍👍
Thanks Bob!👍🏻👍🏻
Thank you very much for sharing your knowledge 👍🏻
You are very welcome and thank you for tuning in!!👍🏻👍🏻
pretty cool Bruce, I do believe I needs to make 2 of these or something like this for gifts.
Hi Doug, thank you! these make great gifts brother! easy to batch out also!
Beautiful piece Bruce definitely like the new design better
Hi James, thank you buddy! Yes the new design is way better! Recieved your Christmas card today , thank you!
@@JordanWoodwerx your welcome was hoping they would put a smile on everyone's faces after the year we've all had
@@bluelineturnings5055 you have succeeded!!
Looking good. Enjoyed as always, Dave.
Hi Dave, thanks buddy, glad you liked it!
Great job Bruce and I definitely like the second shape better! - Ed
Hi Ed, thanks buddy! Yeah, me too, glad I changed it!👍🏻
Lovely piece with incredibly lovely wood grain.......well done and someone will love that one under the free! Thanks for the great video!
Cheers Al
Hi Al, thank you very much! Yes they will, these are great gifts. Glad you liked it and thanks for watching!
Awesome job, thanks for the video.
Thank you! Thanks for checking it out!
awesome design!!
Hi Luie, thanks buddy! something a little different.
Nice job on the board. Merry Christmas.
Hi George, thank you very much!!
Great job Bruce ! it looks brilliant mate and it has inspired me to make one to go with Mrs Brams new kitchen next year!
Cheers mate and take care Bram
Hi Bram, thank you buddy! the Mrs. will love you for it! Cheers brother!
Very nice 👍🏻
Hey Big Ben, thanks brother, glad you likey!!
Great video, love the pattern. I'm going to replicate it. Thank you!!
Thanks Rob!! Go for it!
Got some aged walnut just the other day and gonna give it a shot as well... at least this process. What I am seeing here on this particular board design is when you go to hang it, it is going to want to swing to the left which isn't really a problem unless you're needing wall space or have other things hanging along side it. It won't center when it hangs. But, that's just my thoughts. Still love this finished product though.
That charcuterie board came out really nice Bruce! Grain, color..all nice! Happy Holidays!
Hi Turner, thanks brother!! Happy Holidays! The grain on this is the star of the show!
Very Cool Jordan👍 It Came Out Great Bud!
Hi Steve, thanks brother,appreciate it!!...Bruce
Very beautiful chopper board, Bruce 👌Thanks to You first time I have seen walnut burl 😲 Now I love this wood much stronger. I was making cutting boards but I'm not using them often becouse I don’t want to make scratches on it. All the best, Brother 💪
Hi Rav, thank you very much! I'm glad you liked it. Walnut Burl is beautiful. I know what you mean, I hate cutting them too, lol. Have a good one Rav!!
That came out nice buddy....I get more requests for these silly boards than I do bowls :-) Have a great day!
Hi Chris, thanks buddy! Lol, me too! Have a good one!!
Awesome 👍
Hi Steve, thanks brother!
Very nice Bruce. Fun watching this be made. I was waiting for you to attach a guitar neck to it. I could see a fantastic looking electric guitar in the makes. One of these day I will make an electric guitar body.
The finish looks great and a very useful project.
Take care,
Gary
Hi Gary, thank you! Kinda looks like a Fender telecaster? It would make a good looking guitar. I would lone to see you make one! Thanks as always for watching buddy, appreciate ya!
Man, that’s a beautiful piece, Bruce! Incredibly well done, my friend. 👍👍👍👍
Hi Gord, thank you very much my friend! Great little gifts!
Gord is still around?
@@robertcornelius3514 They haven’t got rid of me yet, Robert. 😃😃😃😃
@@robertcornelius3514 oh yeah!
Very beautiful, thank you for sharing! - New subscriber
Thank you very much Cindy, and I really appreciate the sub! 👍🏻👍🏻
Hi Bruce, I love it!!! I need to get some figured walnut now. LOL. Great video brother. Take care. Cheers, Huw
LOL, Thank you very much Huw!....Cheers!
Your work is very good👍👍
Thank you so much 😀
LOVE IT!! Absolutely beautiful:)
Thank you very much, I appreciate that! 👍🏻👍🏻
Beautiful work, brother. Nicely done! Subbed fo sho!
Cheers!
Thank you very much! Thanks for the sub, greatly appreciated!!
Right on cool cat
Thanks B rollin!
It came out beautifully and you obviously have talent but you took two beautiful pieces of live edge boards and cut off all the live edges
Thanks John , I appreciate that! I love a good live edge as much as the next person, but the couple receiving this board didn’t want the live edge. Really appreciate you checking it out. 👍🏻👍🏻
That came out beautifully. What was the finest grain of sandpaper did you eventually use? When I did something similar to this project, when I put mineral oil and wax on it, the wood went really dark to the point where I could hardly make out the grain. Someone said it could have been because I didn't use fine enough sandpaper, so am curious what you used. Thanks!
Thank you Stephen! I sanded to 320 grit and popped/raised the grain with water and let it dry, then lightly sanded with 400 grit, I did that twice. Then used the mineral oil on it.
Not sure why the grain on your board came out darker, sanding to a higher grit sometimes will make the grain tighter and not absorb the finish, but usually not to the point you can’t see the grain.
Hope this helped Stephen, appreciate you!
@@JordanWoodwerx Awesome, thanks Jordan. I'll try the higher grit next time too!
Jordan i have just started two large butcherblock chopping boards myself and on one side I plan to do a pyography drawing so it can be sitting out as an artistic piece and then the chopping side would be hid. My question is regarding your sanding process, you use water to raise the grain i had planned on using alcohol should I use water for a better finish also when re-sanding how far back did you go or did you re-start at 240 grit? Ps this looks awesome and I love the finished shape 👍👍👍
Hi Gavin, thank you , glad you liked it! For food stuff I would use water. I stopped at 240 before the water then sanded back with 300. I always do the water and sand back twice, could be over kill but that’s how o do it. Always sand back with the next higher grit, if it’s the same or lower grit you reveal new grain which defeats the water treatment. Hope I helped Gavin! PS, let the mineral oil or what ever you use to really soak in, maybe a couple of coats, again, maybe overkill but that’s what I do. Thanks again!
@@JordanWoodwerx thanks very much thats really helpful I am a big believer in over kill as its always better than wishing you had done the extra when its too late. Very much appreciate the help 👍👍👍
@@JordanWoodwerx could I push further in regards your sanding process, you do it twice am I right in saying you sand up to 240 wet and sand from 300ish when do you re wet and what grit do you sand with or is it twice at 240 and 300
@@gavincoyle Hi Gavin, after the second soaking I’ll use 400 grit. Then your board will be smooth as silk!! Keep us posted on the outcome!
Nice job Bruce! One of these days I'll need to make some of these from the planks around the pith when cutting bowl blanks. Is that a HF Jointer?
Hi Robert, thanks buddy! I get asked to make quite a few of these during the holidays. Great use of cut offs and odd pieces. Yes, that is a HF jointer. $35.00 at a yard sale!! Best $35 I've ever spent.
@@JordanWoodwerx lol nice! Works well for what you ask of it?
@@HodgePodgeWoodWorks hey Robert, sorry for the late response. Yes, it actually works really good!! I had to put done elbow grease into the table (surface rust), replace the switch and some new blades!
How do you prevent your boards from cupping?
The wood I use is usually pretty dry. Any cupping is taken care of in the planer. If using multiple pieces of wood, just don’t clamp to tight during glue up. And should be good. Just tight enough to get a good glue squeeze out!
@@JordanWoodwerx Thank you. I need to make sure my wood more seasoned before I start working it.
@@chaosorder1208 yes, it will want to twist and cup on you if it’s green or not quite dry.
@@JordanWoodwerx thanks again
olá gostaria tanto que tivesse tradução.
did you start with 4/4 or 5/4 stock?
Hi Jason it was 4/4.
Nice board a bit dark though
Thanks Bruce,appreciate you checking it out. 👍🏻👍🏻
What a waste of beautiful live edge
Don't get me wrong- it turned out BEAUTIFULLY. But to cut all that off instead of making a river... 😀
Thanks Scott ! Appreciate you watching. Sometimes people want that resin and sometimes they don’t. Purple resin would’ve looked great on there though!
Isn’t epoxy poisonous?
Once cured, no.
(5
Is this code? 😀