Woodworking-How to make a charcuterie board
Вставка
- Опубліковано 30 січ 2021
- In this video, watch how to make a charcuterie board. I used maple for this one. This is how I make them, not sure if it's the right way but this is how I made this one.
Hope you like it, and I'll have links below for products I used.
Thanks,
Bruce
Links: Howards wax and finishes: www.howardproducts.com/produc... - Навчання та стиль
Thanks for making this. Good job with teaching the design considerations and excellent results!
Hi Dale, you are very welcome! So glad you liked it! The designs are endless....thank you very much!
Superb boards Bruce and love the addition of the handle ring inlay ..👍 great job mate!
Cheers, Bram
Hello Bram, thank you very much! Cheers!
Beautiful board. Thanks for sharing the nice work, Jordan.
Thank you Tarek , I appreciate that!
Nicely done! Beautiful board and a clear, concise video. Thanks for sharing!
Thank you very much and you are very welcome, glad you like it!
Beautiful awesome pieces Great job Bruce
Hi Rich, thank you, that’s awesome!!
Beautiful work. Thank you for sharing.
Thank you Lala, thank you you for tuning in! 👍🏻👍🏻
They all look great Bruce and nice touch adding the walnut inlay! - Ed
Hello Ed, thanks brother! Had to mix it up a bit with the walnut!
That is a great looking board!
Hi Dave, thank you very much!!
Wow, that's really nice. I like the design of the others as well.
Hi Kim, thank you so much! Yeah, the other boards should come out nicely!
Great looking piece of wood!
Thanks Bailey! Came out good!👍🏻👍🏻
That nice walnut inlay. Great work. Thanks for sharing! ❤
Hi Bard, thank you very much! Inlay was a nice touch for this board. Appreciate ya!👍🏻👍🏻
Great. Another project on my list..... Nice work Bruce.
Hi Andy, Yes, great projects to make! Thank you!
Good job Bruce! Gonna be some great boards! 👍😂
Hi Cortland, thank you buddy!
This turned out great. I do especially love that handle hole with the two species of wood.
Thank you Angie, thought that would be a nice touch. Glad you liked it.
Wow! Beautiful job buddy!
Hi Carl, thank you, appreciate ya!!
Looks great. Well done.
Hi Derek, thank you so much! Really appreciated! 👍🏻👍🏻
Huge boards! Really nice
Thank you so much!!👍🏻👍🏻
Thanks for sharing they all look great... cheers
Hello Grahame, you are very welcome and thank you so much!
Nice work, Bruce. Very nice!! 👍👍👍
Hello Gord, thank you very much buddy!!👍🏻👍🏻
Never thought of the insert in the handle. Great idea.
Hi Rodger! Yeah it adds a nice little touch! Thanks for checking it out!👍🏻👍🏻
Nice job, looks amazing. I’m just thinking about doing a few boards as I’ve been doing resin tables and some resin lamps during lockdown. I’m a plasterer so I’m busy with that now so unfortunately I don’t have a lot of time, I’d love to do this as my job/business though.
Thank you Kevin. The boards do really good! Good luck, I have a full time job as well which helps me do this!
Strong work… love the inlay
Thank you Sean! 👍🏻👍🏻
That is a beautiful board. Like your channel and just subscribed. Thanks for the ideas and tips!
Thank you , I really appreciate that ! 👍🏻👍🏻 I’ll be heading over to check your channel out and return the favor!
Fabulous production and product..
Thank you very much! Appreciate you checking it out. 👍🏻👍🏻
Love your Shop Dogs and as always great video
Thanks Ronnie! Yeah, I like them too! Thanks for tuning in, really appreciate it.👍🏻👍🏻
Lovely board bruce
Thank you Robbie! 👍🏻👍🏻
Great looking board brother! I want to go eat some cubed cheese and fancy sliced meat now!
Thanks buddy! I was thinking that the whole time I was making these!😀👍🏻👍🏻
Nice work~! I like the Walnut-plugged finger hole.
Thank you Andrew! Yeah, the walnut really sets it off. Appreciate you tuning in!👍🏻👍🏻
That Came Out Pretty Freakin' Cool👍 Nice Job Brother!
Hi Steve, thanks buddy!!👍🏻👍🏻
Very nice Bruce!
Thank you , appreciate you checking it out and commenting! 👍🏻👍🏻
Neat looking cutting boards
Hi Chris, thank you!!
Very nice good video Bruce
Hi Ben, thank you brother!!👍🏻👍🏻
Love the dogs.
Thanks! Me too! 👍🏻👍🏻
Man that's nice! That oil just made it pop!
Thanks buddy!👍🏻👍🏻
That is a grest shape with live edge....like the rest of the boards...nice video
Thank you Mom, glad you likey!! Love you!❤️
Looks like you have good help in the shop.
Sure do Robert, love my helpers ! 😀
Золотые руки!!
Great job in design I like them
Thank you very much, appreciate you checking it out!👍🏻👍🏻
Really nice board.
Thank you Bob, really appreciate that! 👍🏻👍🏻
Very nice Bruce
Enjoyed your video and I gave it a Thumbs Up
Thank you very much! Appreciate you checking it out!!👍🏻👍🏻
Great board and great video Bruce. And here I thought things had to be round to be so pretty..lol
Really a nice finish as well. I need to pick some of that up.
Take care buddy,
Gary
Hi Gary, thank you buddy! That flat stuff looks good too and it’s a nice little break from the lathe! Glad you liked them buddy!!👍🏻👍🏻
@@JordanWoodwerx for sure Bruce flat work is lots of fun as well and very beautiful as well. Matter of fact I just built a new information desk for our church. The old one was taken over with live streaming gear. It was really fun to do and came out pretty nice.
But that is out of my system so back to the lathe...LOL
@@ThePapa1947 hahaha, yes sir, I’m already back on the lathe!!
Like button CRUSHED!! So cool 😎
YES!!! Thank you!!
Great job
Thank you very much!
Lovely. Had to watch video to find out how to say charcuterie!
LOL, Hi Tina, glad you liked it!!
Thanks... The best.....
Thank you very much!
Awesome, Bruce!!! Making a flower shaped one for February?
Hello Daniel, thank you very much! No, but that is an excellent idea!!
Lovely board and finish and the other three with their unique shapes should look excellent.........well done! Thanks
Cheers Al
Al, thank you very much! Appreciate you!
Good job
Thank you Ron! 👍🏻👍🏻
Put leather rope on them and hang them they look fantastic 😊
Great idea, thanks for the idea!👍🏻👍🏻
Beautiful work Jordan and that board looks awesome can I ask did you hit the live edge with the blow torch or is that the way it came out? Looks amazing no matter 👍👍👍
Hello Gavin, thank you!! I didn’t, that natural edge was just sanded back to smooth some edges, but that was the natural color.
@@JordanWoodwerx it looks absolutely awesome mother nature really is amazing
Heck yea man...loved the inlay! UA-cam keeps 'unsubscribing' me from channels at random...wth??? Looks like I'm back on now
Thanks Chris! Welcome back brother!!
Love the walnut inlay! Did you cross grain the plug?
Thank you Lewis, the grain was matched.
Gorgeous boards, Bruce!
I do have a question though...do you think you could get anymore wood underneath your lathe?! 😂 I sure hope you never drop anything down there, it would take you three weeks to dig it out enough to find it! Lol!
An awesome video, once again, my friend!
hahaha, hi Seth! I think I can squeeze a couple more chunks in there!! Thanks for checking the video out! Gotcha a sticker shout out on the next video! Be safe!
@@JordanWoodwerx Thanks man! Yours just arrived today! Hopefully get your shoutout up as well!
@@BrickhouseCraftWorks sweet!!
Awesome board! Great job. What was that glue that you used to fill the cracks? Didn't get what you said. Thanks , David
Thank you David, appreciate that very much! The glue was Starbond CA glue…basically super glue.👍🏻👍🏻
@@JordanWoodwerx Thank you!
Hello Jordan and thank you for the video. My question is-do you mineral oil the back side of the boards as well?
You are very welcome! Yes I did oil both sides, gives it good protection. Appreciate you checking it out.👍🏻👍🏻
@@JordanWoodwerx Thanks very much for your reply. I subscribed to your channel. Best wishes to ya.
@@brianward772 very appreciated, thanks Brian!
What do you think about adding a colored resin in the cracks?
Hi Donna, I love adding resin to cracks and voids! I did a walnut board awhile back and filled a void with resin and it came out amazing. Thanks for tuning in, I really appreciate it!👍🏻👍🏻
Would have been a great place for a butterfly...
For sure! Thats a great idea!
Nice. Im in australia. How much does that sell for in your country?
Hi Tim, Thank you! I sell these for around eighty five. depends on the size.
@@JordanWoodwerx .thnx. that about right for australia ss it convrrts to our $110 ish
Beautiful!!! Awesome job......soooooo, "charcuterie boards" is just a fancy name for live edge, or uneven edge cutting boards????
Just being silly there....
Hahaha, thank you Eric! Yes it is, love it!
Have you ever tried to make that insert without a lathe?
I think it is possible on a drill press, using hole saws. Drilling the inside of the insert 1st then the outside, clamping the work piece to the table.
@@JordanWoodwerx ok I see what you’re talking about. Thanks. Nice work!
@@webcrawler3332 thank you!👍🏻👍🏻
i use my conditioner hot so it goes into all the poors better ,just my opionion
Hi Greg, I agree , I started warming it before applying. Thanks for checking it out!
Very nice , i will gladly cut my home made salami on it .
Thanks for liking Ahron, appreciate you!
Did i hear you use "trick"?
Probably
@@JordanWoodwerx haven't heard that in ages. That was a nice walk back.
@@wyldemanironworx7099 thanks, I like to keep it old school 😀
@@JordanWoodwerx lol i hear ya lol