Thanks Pete. And thanks for watching in. Paul seems to be really enjoying the car now. These results of driving pleasure is what motivates us to do what we do,
Awesome video....I'm doing my 06 e64 right now but I have a question I can't find my the clutch pedal switch harness. Do I got to have that hook up for the car can run correctly and do I have to run a dual flywheel or I can use a single flywheel? Thank you for your help
You can run either style flywheel. You will need to manually wire in the clutch pedal switch harness, you should be able to use power from the brake switch, and then tap into the can bus for the required signal wiring
We are based in Sydney Australia. We can help with parts and programming if required. We have a complete DIY kit. email us for info. cars@brintech.com.au
what do you charge for this? i am getting this done next week and the shop is asking 5200 canadian (4000usd) for the job, but they also want to keep all of my smg parts (wich are good still, only 115k km on the car) and thats non negotiable to them. do you think this is a fair deal?
I have a 2002 e46 m3 wit the ess supercharger kit and I'm looking to the manual swap if I were to send u guys my ECU bin (file) what would you guys charge to program to a manual
The bell housing needs to be machined, modified and installed with new parts for the manual to work. Where are you located? We can carry out the work for you
@@BrintechCustoms I am in Belize, However, the transmission is still in the US ,How much would you charge to do the complete conversion? Also I'm a machinist, I can do it myself here ,but I don't know what it is you do to it
Hi Nick - we dont know anyone personally in the states, but im sure there would be a number of shops there that could do it. We can certainly help with the coding and parts
BONJOUR est ce que on peut monter une boite de vitesses de m3 e46 , dans une m5 e39 en mettant la partie avant de la boite de vitesse DE M5 E39 DANS LA BOITE DE M3 E46,?MERCI
Thanks Tito. To turn off the display on cluster you need to code it to manual. You can do this with software called NCS Expert. This method requires some coding experience and can easily ruin the cluster if not done correctly. There are also other methods using an Auto logic Scan Tool which is much easier to do. Worst case you can send it to us and we can do it for you
@@BrintechCustoms Thank you it's nice of you to propose me but unfortunately I live in France, can you give me the name of the tool that would allow me to disable the screen, because I'm very annoyed ...? I own Ista-D my I do not think I can do it with this tool. I heard that you can just remove a fuse, but you can not find which one .. thank you in advance
@@BrintechCustoms I am ready to make a payment on paypal, if you give me the procedure to follow, or what tool used because the car will pass the technical control and it will be refused because of the light on, I look everywhere, nobody is able to suppress this light, you are the only one to have answered me, I hope you can help me thank you in advance
@@titogame5718 unfortunately a fuse removal is not going to correct the cluster from SMG to manual. It needs to be coded. This will remove the gear display and also the warning cog light from the panel. I dont think ISTA will do it, it really needs to be done with NCS Expert. If you have access to an Auto Logic scan tool then this will be easier for you. Like I said, worst case you can send us your cluster and we will code it and send it back. cheers
@@BrintechCustoms hello, I have NCS expert on my computer, but i do not know what To change, Can you give me the procedure ? Even if i have To pay you, It would avoid sending you the cluster, especially since i live in France, and i need the car. Thank you
I’ll change my car Nissan Silvia→m3. I’m getting e46 m3 smg right handle Because smg is cheaper than 6mt. I check your shop’s online store, your convert kit is attractive product. And l was surprised that you sell Toyota1uz adapter in Australia : )
Great video for those considering the swap to see what's involved. Looks Like a fantastic result for owner, great work!
I just had mine swapped to 6 speed manual after SMG pump died. Much happier- better response and more fun to drive.
Love your work guys, bring my m3 e36 from 6 years of storage soon. Wouldn’t trust anybody else.
Great job Boys - Have been on many fantastic drives with PY - He's a rock-star behind the wheel - He's going to love this conversion....
Ebay Sales does he have vids on youtube
@@therightnuke Do you mean Does Paul have videos on youtube?
Thanks Pete. And thanks for watching in. Paul seems to be really enjoying the car now. These results of driving pleasure is what motivates us to do what we do,
Brintech Customs yeah i wanna see this M3 get spanked haha
Excellent 👍👊👊
Will be getting this done
Hello. First of all, congratulations for this job. I want to do the same.
Is it possible for you to give me a List of all the parts I need.
Really enjoyed the video Keep up the Awesome work!
Thanks Krunds keep watching in and we will do our best to keep you guys entertained
plan on buying a rare colour e46 m3 smg soon. Your website says this is conversion is out of stock? Is it still available?
How much did it cost you?
Awesome video....I'm doing my 06 e64 right now but I have a question I can't find my the clutch pedal switch harness. Do I got to have that hook up for the car can run correctly and do I have to run a dual flywheel or I can use a single flywheel? Thank you for your help
You can run either style flywheel. You will need to manually wire in the clutch pedal switch harness, you should be able to use power from the brake switch, and then tap into the can bus for the required signal wiring
Do u do smg code removal???
Perfect work you guys did
Can I ask where you working shop? From Sweden
We are based in Sydney Australia. We can help with parts and programming if required. We have a complete DIY kit. email us for info. cars@brintech.com.au
what do you charge for this? i am getting this done next week and the shop is asking 5200 canadian (4000usd) for the job, but they also want to keep all of my smg parts (wich are good still, only 115k km on the car) and thats non negotiable to them. do you think this is a fair deal?
We charge $6500 AUD. We also sell a complete kit for $3100 AUD.
May you give a more or less estimated cost (parts and labor) for 2004 e46 M3. Thanks
Please email us at cars@brintech.com.au our kits are $3100
Bought mine converted. How do I get the cruise control and rev cluster working again?
Evan gelos it's all in the coding. We can do this for you. Send us an email. Cars@brintech.com.au
How much does this swap cost
I have a 2002 e46 m3 wit the ess supercharger kit and I'm looking to the manual swap if I were to send u guys my ECU bin (file) what would you guys charge to program to a manual
Pedro P sure can. Send us an email. Cars@brintech.com.au
Fiz swap na minha 323i e46 também. Queria saber como vcs apagaram o erro do câmbio que aparece no painel.
What did you take the belhousing off for ? I need to do the same thing to mine ,and would like to know what all to do
The bell housing needs to be machined, modified and installed with new parts for the manual to work. Where are you located? We can carry out the work for you
@@BrintechCustoms I am in Belize, However, the transmission is still in the US ,How much would you charge to do the complete conversion? Also I'm a machinist, I can do it myself here ,but I don't know what it is you do to it
Aaron Janzen if you send us the bell housing we can take care of this for $1250 aud plus a y freight.
Can manual conversion be done on the e60 m5 smg?
Yes it can - but not the same way this is done. You will require a completely different box. We have them in stock and can carry out the swap for you
Is all of this in your kit on your website
www.brintechcustoms.com.au/e46-kits-and-parts/e46-m3-manual-conversion-kit
www.brintechcustoms.com.au/e46-kits-and-parts/e46-m3-manual-bell-housing-getrag-420g
What’s the parts/machining cost without labor?
Send us an email and we can run through the details. cars@brintech.com.au
Can this be done on the e46 325ci smg if so what sort of price am i looking at drive in drive out?
isaac trueman unfortunately not the same process. we can do a manual swap but it's a replacement gearbox also. we can convert you to manual for $7000
If anybody knows a shop in the Northern California area that can do this please let me know
Hi Nick - we dont know anyone personally in the states, but im sure there would be a number of shops there that could do it. We can certainly help with the coding and parts
Hi guys, great work 👍 I see you didn't put a gear identification censor, isn't that necessary??
Najib no we didn't. It's not nessecary when you do the correct coding
I'm planning to convert my gearbox to manual, is it possible to by the coding?
Najib yes where are you located?
To far away :( Sweden
Najib you can post me your ecu and cluster
How long does it take to do the swap?
Jimmy Lo we can have it done for you overnight
BONJOUR est ce que on peut monter une boite de vitesses de m3 e46 , dans une m5 e39 en mettant la partie avant de la boite de vitesse DE M5 E39 DANS LA BOITE DE M3 E46,?MERCI
Sorry we dont speak French - do you need help converting your SMG box to manual? We can help
Hello, nice video, how did you turn off the digital screen on the meter? thank you
Thanks Tito. To turn off the display on cluster you need to code it to manual. You can do this with software called NCS Expert. This method requires some coding experience and can easily ruin the cluster if not done correctly. There are also other methods using an Auto logic Scan Tool which is much easier to do. Worst case you can send it to us and we can do it for you
@@BrintechCustoms Thank you it's nice of you to propose me but unfortunately I live in France,
can you give me the name of the tool that would allow me to disable the screen, because I'm very annoyed ...?
I own Ista-D my I do not think I can do it with this tool.
I heard that you can just remove a fuse, but you can not find which one ..
thank you in advance
@@BrintechCustoms I am ready to make a payment on paypal, if you give me the procedure to follow, or what tool used because the car will pass the technical control and it will be refused because of the light on, I look everywhere, nobody is able to suppress this light, you are the only one to have answered me, I hope you can help me thank you in advance
@@titogame5718 unfortunately a fuse removal is not going to correct the cluster from SMG to manual. It needs to be coded. This will remove the gear display and also the warning cog light from the panel. I dont think ISTA will do it, it really needs to be done with NCS Expert. If you have access to an Auto Logic scan tool then this will be easier for you. Like I said, worst case you can send us your cluster and we will code it and send it back. cheers
@@BrintechCustoms hello,
I have NCS expert on my computer, but i do not know what To change,
Can you give me the procedure ? Even if i have To pay you,
It would avoid sending you the cluster, especially since i live in France, and i need the car.
Thank you
May i know, how cost for parts to convert to manual.....from malaysia 🇲🇾
Yes we can send out a kit to Malaysia. Please email us for info. Cars@brintech.com.au
How much for a complete conversion kit?
I am from USA.
Our complete kits are $3100 AUD
Do you have the link?
Is possible to conversion to smg
auto l yes it is possible
smg is not GETRAG?
ビヨンセメリーナ yes it is. getrag 420g. you can see it embossed on the side of the gearbox.
@@BrintechCustoms thank you. I want to try conversion, but manual getrag gearbox casing is too expensive in Japan.
I’ll change my car Nissan Silvia→m3. I’m getting e46 m3 smg right handle Because smg is cheaper than 6mt.
I check your shop’s online store, your convert kit is attractive product. And l was surprised that you sell Toyota1uz adapter in Australia : )
Showing off 99%
Showing how 1%
SLAM the video would go for 12 hours if we were to show how every step. If you want specifics feel free to ask. we don't intend to hide anything