FourTrax 300 Ball Joints

[@juancarlos-bryancruz9585]

Just bought a 96’ this video was very helpful plan on watching your brake video because at the moment I have no breaks

[@daveraymond2265]

Glad it helped. Thanks for watching!

[@EricPoulsen]

Thank you for this -- was very helpful.

[@phillipschwarz66]

Thank you for this video it was very helpful

[@Shookiiee]

Next time your removing the cv from the knuckle just remove the shock bolt from the upper control arm and then you can loosen the control arm bolts and swing your arm up and slip the CV out

[@taylorg223]

Great video , going to attempt with a c clamp

[@noahjagger3831]

I’m getting ready to do my axles, ball joints and wheel bearing on mine is there a certain size ball joint removal tool?

[@daveraymond2265]

I used the standard ball joint press tool with sockets that would work.

[@Day12My]

16:21...You shouldn't have to tap it in. It just pushes in pretty easy

[@daveraymond2265]

I am tapping it past the expanding retainer clip. You cannot just push it past that clip if the clip is doing its job 👊

[@Day12My]

@@daveraymond2265 I disagree. I do it all the time. I mean if you can pull it out you should be able to push it in.

[@daveraymond2265]

@@Day12My The clip is there to keep it from coming out easily

[@69dwjohnson]

@@daveraymond2265
I agree , it needs to be taped in the way you did it.

[@CbrF4i600cc]

Normal C clamp work?

[@daveraymond2265]

This Tool is super heavy duty much stronger than a C clamp. You can try and you may have success

[@jacobwilliams7953]

What’s that tool called where your removing lower ball joint front control arm?