Best Mazda 6 door panel removal and install on UA-cam. Very detailed. I want to change my speakers so I watched a bunch of videos. Not many show how to put it back together properly. Thank you
Thanks for the video. Half the door fasteners were still in the panel. Was able to follow your video and get the panel back on with no issues. Much appreciated.
I have to say a huge thanks to this guy, I had two blown speakers and just followed this guy's step by step instructions and saved myself a fortune! A serious thank you all the way from Ireland. There's a few videos of how to do this but this one is miles ahead of the rest. Cheers pal!
Thanks! This showed me I can take out my window switch panel by itself and save the whole hassle of taking the door panel off. My driver window switch got shaky out of nowhere earlier today unexpectedly. So now I know I can just switch it out and order a replacement in the meanwhile. Thanks!
Thank you for the steps to remove the rear door panel. I did not want to break any plastic getting the left rear door panel off to replace the window motor and regulator.
Wow, this is quite an easy dyi job well shown. #thumbup One question: once the door panel is removed, is there an easy access to the mounting of the arm rest? I want to see if I can replace it or stuff it underneath the cladding, because the foam padding is pretty much gone.
hi mate really appreciate this video ! liked and sub . I have a question do i have to remove the battery connection if i were to remove the seats both passenger and driver . Im a little worried about the airbag light popping up .
hello great video ! my door handle move slightly forward and jamming will try to take it back after panel removing :) btw have you got any idea how can I remove chrome trim which is located above rear light ? thank you
Hey hi thanks for your feedback,, I'm sure that trim is just push in with some clips ,, try to look for it like you want to buy it and you will see if any bolts are involved
Tried installing led in the bottom door light and the socket got pushed out .. do I need to remove the hole door panel or can I just remove the bottom half ?
Hey can you remove the window switch assembly without taking the entire door panel off? Your video doesn't show you removing that part, only unplugging its two wires so you can freely take the door panel off.
Hey another question for you. So the window switch assembly I attempted to replace was exactly the same configuration as the old one except only the driver's window was auto up and down. So not exactly the same part. I connected the replacement switch assembly and without touching the ignition button accessories turned on and the window switches were controlling accessories. Car would not start unless I depressed one of the window switches. So I put the old one back in but the damange has been done. Car will not start. When I depress the brake, the green key identification light inside the tachometer does illuminate, but the light on the ignition button blinks yellow instead of turning green. I unhooked the battery for a minute and then reconnected to see if that would somehow reset things and it didn't work. Any ideas please help?!
Really why does no one show how to remove the insulation I'm trying to get to the actuator but theres that hard plastic cover that seems to have the windom attacked to it
I just bought a Mazda 6 after 10+ years of not being able to drive...now I am driving, but trying to do the best I can as anyone can trying to take care of my "Marina", that is her name. (my Mazda 6 that I am referring to) NEED ANY INFO?HELP? THAT IS OUT THERE! THANK YOU< THANK YOU
Best Mazda 6 door panel removal and install on UA-cam. Very detailed. I want to change my speakers so I watched a bunch of videos. Not many show how to put it back together properly. Thank you
You welcome Duke “ thanks for your feedback “
I just got a random rattle on the drivers door which is driving me insane, gonna inspect it today, great tutorial :)
Thanks
Thanks for the video. Half the door fasteners were still in the panel. Was able to follow your video and get the panel back on with no issues. Much appreciated.
You're welcome boss , thanks for your feedback
I have to say a huge thanks to this guy, I had two blown speakers and just followed this guy's step by step instructions and saved myself a fortune! A serious thank you all the way from Ireland. There's a few videos of how to do this but this one is miles ahead of the rest. Cheers pal!
Thanks thanks nellser , I'm so happy that one of my video help you get the job done , thanks for your feedback
You make it look like an easy job. I will try myself. Thanks for your video. Good job.
Thanks bruh. I replaced the side view mirror.
Thanks! This showed me I can take out my window switch panel by itself and save the whole hassle of taking the door panel off. My driver window switch got shaky out of nowhere earlier today unexpectedly. So now I know I can just switch it out and order a replacement in the meanwhile. Thanks!
Oh nice thanks for your feedback
Thank you for the steps to remove the rear door panel. I did not want to break any plastic getting the left rear door panel off to replace the window motor and regulator.
You’re welcome boss and thanks for your feedback
Great. Thanks.
Thank you sir great job and good guida 🤝
You Sir, are a life saver. I really appreciate it, Thanks a lot.
Your welcome boss
Thank you so much!!! Hope you are having a great end for 2020. It's certainly been a looooooong year!
U are welcome thanks for your feedback , same too you boss
Thanks. Helped me change my mirror!
You'd welcome,, good ,, thsnk for your feedback
Thanks bud ! helpful for the DIY folks
Your welcome thanks for your feedback
Thanks bro , fixed my door 😘
Your welcome thanks for your feedback
Thanks, man. Good video.
Thanks Andrew
Thanks. I need to replace the speaker.
Your welcome boss
thanks mate, god bless...
Thanks boss
Great video, thank you! Two questions; what did you call that special tool you used and would this video be pretty much the same for a 2016 Mazda 6?
Hey thanks ,, Trim remover , yes same process
Do you have a video on how to remove the entire mirror?
Sorry no
Wow, this is quite an easy dyi job well shown. #thumbup
One question: once the door panel is removed, is there an easy access to the mounting of the arm rest? I want to see if I can replace it or stuff it underneath the cladding, because the foam padding is pretty much gone.
Thanks yes
Thanks
You're welcome
hi mate really appreciate this video ! liked and sub . I have a question do i have to remove the battery connection if i were to remove the seats both passenger and driver . Im a little worried about the airbag light popping up .
Yes negative only will be good
Thanks for sub boss
hello great video ! my door handle move slightly forward and jamming will try to take it back after panel removing :) btw have you got any idea how can I remove chrome trim which is located above rear light ? thank you
Hey hi thanks for your feedback,, I'm sure that trim is just push in with some clips ,, try to look for it like you want to buy it and you will see if any bolts are involved
What ever you do make sure you use plastic tools not mental
Is there another layer I can remove to try to push a big dent out? I suppose it would be behind the steel or aluminum panel that the speaker sits in.
After you remove the door panel there will be a plastic
I have a 2015 and I had to change the passenger side mirror, thou I broke nearly every single push pin clips...😂 Is what it is I reckon
lol 🤣
I’m having a rattle come from my driver side door speaker (when volume is up), is it worth doing this to check if any screws are loose or something?
Yes do it
Tried installing led in the bottom door light and the socket got pushed out .. do I need to remove the hole door panel or can I just remove the bottom half ?
Mmm I think is better if you remove the door panel yes
Hey can you remove the window switch assembly without taking the entire door panel off? Your video doesn't show you removing that part, only unplugging its two wires so you can freely take the door panel off.
hi yes you can remove it by pulling it up
Hey another question for you. So the window switch assembly I attempted to replace was exactly the same configuration as the old one except only the driver's window was auto up and down. So not exactly the same part. I connected the replacement switch assembly and without touching the ignition button accessories turned on and the window switches were controlling accessories. Car would not start unless I depressed one of the window switches. So I put the old one back in but the damange has been done. Car will not start. When I depress the brake, the green key identification light inside the tachometer does illuminate, but the light on the ignition button blinks yellow instead of turning green. I unhooked the battery for a minute and then reconnected to see if that would somehow reset things and it didn't work. Any ideas please help?!
More likely you have a bad fuse
Thanks I need to replace the mirror
U are welcome
Really why does no one show how to remove the insulation I'm trying to get to the actuator but theres that hard plastic cover that seems to have the windom attacked to it
car is too new thats why, no video yet
What if I break one of the fasteners?
You be ok the door has too many lol
You can buy some on Amazon or other places online. They're relatively cheap.
I just bought a Mazda 6 after 10+ years of not being able to drive...now I am driving, but trying to do the best I can as anyone can trying to take care of my "Marina", that is her name. (my Mazda 6 that I am referring to)
NEED ANY INFO?HELP? THAT IS OUT THERE!
THANK YOU< THANK YOU
Congratulation