How to FIX a LEAKY Outdoor Water Faucet!
Вставка
- Опубліковано 29 сер 2024
- How to FIX a LEAKY Outdoor Water Faucet! This frost free hose bib was leaking and needed a new flat washer for a quick and easy repair. Stop your outdoor faucet from dripping water today! Hope this helps! Tools + washers listed below. Subscribe here :www.youtube.co...
Small flat washer set for hose bibs link: amzn.to/329sZZF
6 in 1 screwdriver: amzn.to/3dD5ZWs
Knipex 6in Cobra pliers link: amzn.to/2Yu5LeZ
(Amazon Affiliate links)
Follow us on Facebook: / ufix247
We love helping people and hope that we are doing that!
Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license
(creativecommon...)
Artist: audionautix.com/ - Розваги
Water hammer is never a good thing for plumbing 😁. Always go and turn your house's main shut off valve on and off at least once a year so in an emergency, it does not fail. Great how to That Fix It Guy.
This is a great advice. You always want to make sure that valve is working!
Thank you so much for this video! This woman is going to buy a washer tomorrow and fix my leaky outdoor faucet.
I'm getting ready to repair both outdoor faucets that leak....great video!
Another great one brother showing us how to fix instead of replacing 👍
For sure Steve! Thank you for watching!
Thanks for this video! I’m no way near a handyman, this will help me a lot and my pocket specially nowadays! 😊
Now, I need to find my main water line....
I am happy to help! Little tasks that you can do yourself will have you a lot. Let me know if I can ever help! Thanks for watching!
Thank you for the video. I had to do this a few years back. The last time I had to replace most of the parts.........
Yeah I got luck on this one with just the washer. I have another video coming out and will show replacing a bit more.
Just a suggestion Try to Use a silicone non slip grip pad like the used to open tight jar lids, to hold it next time
This is a great suggestion! Thank you for that. I will get one put in my Amazon account fast.
Very Easy and great explanation, helpful and friendly voice. Keep it up.
Thank you for the kind words. We really appreciate it. I hope we can help again.
Thank you so much! So happy you have enlightened me!!!
So happy we could help.
Thanks! Just fixed my leaking spigot!
So glad to hear this! Hope we can help again!
I agree, looks like someone else did a silly long swap and hoped they wouldn’t have to replace for 20 years.😤
Lol! That screw really sucked. Next time I’m going to go with my gut and just swap it out. Thanks for watching Jim!
If your going to do it DO IT RIGHT 300-500 series faucets come with a complete rebuild kit available at your local hardware store ,, it’ll have every washer and O rings needed
Great walk through
Thank you. So glad this was able to help.
You should use channel pier to hold the body of the valve when turn, because you don’t know how tight that will be.
That is great advice. I slack at times.
Thank you!
Your welcome. Happy this could help
Good Job.
Thank you for watching.
Use a squared grommet at the very end ,,it WILL FORM FIT MUCH BETTER THAN THE GROMMET YOU USED
Fix It Guy: I need to change a worn-out exterior spigot which is probably original to the house (1965). It was installed tightly right up to the brick exterior. I can’t see behind it to determine if it’s a screw-on or soldered. I’m afraid to twist it, in case it’s soldered on. Without cutting into the wall on the inside of the house, is there anyway to tell if it’s soldered or a screw-on? Thanks!
I don't know of a way to tell without getting a look at it. A little drywall repair is cheaper than twisted up copper though. If you find a way please let me know.
Excellent video, I have a couple of questions. I have the same setup you have and I wonder do you really need a water sill cock with the anti siphon vacuum breaker valve on top of the water valve? What's it's purpose? One more question, I have another outside water spigot identical to this and when I tighten the handle to turn the water off it just keeps turning and turning and turning. I have to find the right spot where water just barely drips then I added a two way splitter to where the water hose connects with shutoff valves on it to stop the water from dripping. Does that mean the entire piece needs to be replaced? Thank you for the video.
The vacuum breaker is so contaminated”dirty” water can’t get back in your drinking system.
Is the handle stripped where it connects to the stem? I am happy to try and help with these kinds thinks. I love it.
Nicely done sir
Here's where working over a cloth, magnetic mat vs. grass would be better to keep track of any parts you dropped or took apart. Perhaps a small can of compressed air in your "arsenal," would be a good addition, to blow debris off parts?
I try to keep a towel with me for most under sink work. I should have pulled that out. I will have to look into a magnetic mat. I have not heard of one. Canned air would be great as well!
Thank you for your insights. I really appreciate you watching. This is one of the reasons I love UA-cam!
And a can of WD-40 to clean that crap out!
You should hold the faucet in place while loosening or tightening the spigot
Hey Brian thanks for the video.It looks like the screw holding the washer was to long and one of your shorter screws would have worked.👍
Hey Britt I though so too! I just did not want to take a chance with it.
That long screw may have messed up the threads and that why it was hard to remove. Not sure if putting the correct screw in would have helped.
Nice video
Thank you.
Use silicone grease to lubricate parts not petroleum based products that will eat away at rubber or plastic parts.
That is true. I did not think that was a petroleum based lubricant, but turns out it is. Thank you.
How did you know that wasnt soldered on? Struggling w that part right now.
Thanks for the tips Brian! I needed this video much sooner!
Glad you got it figured out! Thank you for watching!
I have the same faucet but it leaks from the handle only when the faucet is open. No leaks when the faucet is closed. Do you by any chance have another video for that specific repair?
Sounds like the packing is leaking. Did you try tightening up the packing nut? That is the first but right after the handle. If it is all the way tightened you may need to put some more packing in that area.
@@ThatFixItGuy I tightened it and that stopped the leak. Thanks !! It is almost all the way tightened, it may need packing sometime in the future if it leaks again.
Great video. I noticed you don't use any solvents or WD-40 to help clean and loosen the parts, is there a reason behind that?
I typically don’t use any of those type of solvents or cleaners when dealing with potable water (drinking water). I’m sure some people do, I just don’t like introducing anything that could be harmful into the system. Thanks for the question.
@@ThatFixItGuy Use silicone grease the others will eat away at the rubber seals.
@@mikemaid5350 thank you for pointing this out.
@@mikemaid5350 What about white lithium grease?
Do this over the grass is not a good idea, once you drop something, it is very difficult to find.
Your so right. Lay down a towel or something.
I need to replace my faucet stem, the screw for the handle is striped out. How can I find out the type of stem without removing it? It’s sterling brand, house built in 1959
I have tried to look for a replacement stem for you. It may be hard to find. Not much information on sterling hose bibs.
What about if its only leaking when you open the faucet. From top.
You may just need to replace the vacuum breaker which is that top piece. Make sure you know your manufacturer. That top piece should just pop off or screw off and then you can just replace that assembly in there.
If it is newer I would remove the top and check the seal. I have had seal not be on the whole way and caused the vacuum breaker to leak. I will add these to my video list.
Just tighten the packing nut and it’ll stop leaking
Sometimes. Great tip. Thank you.
I hope this will fix on mine a guy just came in and told me $600 dollars. Hell noo
I hope this will help you! I know prices are crazy these days! You want to find a small one man shop if you can’t fix it. You can always email me if you run into something as well.
Update! I fixed it! It was awesome!!! Thank you so much! Spent like $5 at home depot
That is great news! Congratulations! Money well saved!
@@ghiawafa3353 talk about a cost savings from $600! Haha nice
Do I HAVE to shut the water off?
You want to shut the off for sure.
Was this a nibco 90?
Omg so easy thank you 🥸
So glad this could help you out. Please share and help us grow. Thank you.
When replacing the washer, the flat side goes against the connection so it’s flush. The numbers and letters should be on the outside. Per Richard ( This Old House)..
That (This Old House) Video you saw that on was shot on April fools Day! LOL! You always put the numbers and/or letters on the inside of the cup. You want the flat side of the washer on the outside towards the seat. I just watched their How to rebuild a hose spigot. Theirs was the same way only easier to change. Thank you for watching.
A little w d 40 helps
Give that squeaky wheel some grease.
I bought mine brand new and its dripping already. Also just crossed my mind that i can just buy a new one from home depot and take that washer and put it back and they wouldnt even know. 😅
Don't you have an indoor valve to shut off water in the whole house? This is the street valve you are showing.
I know. They do not have a valve in the house. There is a ratty looking one in the ground right out side of the house. I dare not touch it.
Neosporin and a band aid helps boo-boos heal fast.
Totally. That’s our go to around here.
hi Brian i have the same problem i was watering plànts after i was done i could not shut off the water so i put a
water pressure spray nozzle what could be the problem
I would think in is the washer as well. Have you tried shutting the water down and changing the washer?
Grab the nut closest to the body. Me... Drops phone.
Lol! Plumbing can be taken so wrong!
Later ones right
Mine leaks at the top when the water is on.
It is leaking fro the vacuum breaker then. If you know the manufacturer then you can get a rebuild for it. Super easy fix.
More great content!
Thank you Cotton! Hope things are going well!
All good, beep and dig!
Jaw orientation of crescent and pliers is backwards…
Looked like it was still dripping lol but good vid thnks
Lol! The magic of video! Nah just a bit of water in the spigot. That kit hooked it up. Thank you for watching!
Common screws should be illegal.
Yep they should totally switch to torques at the point. Could save a lot of headache I think.
@@ThatFixItGuy prevent so many gouges in metal, wood, and skin the number couldn't be comprehended. :)
U can’t turn it off at the meter unless your a plumber or the city…
It’s the water to your house. I can turn it off in an emergency situation. Who dictates why your emergency is?
He certainly can. We just saw him turn it off with ease in the video.
He could have flipped it around and used the old one.
Yep, Poor design. 😕
Check
Looks like that flat head screwdriver got his finger
I don't remember if it was the flat head or not, but something did get it!
And the water stops dripping... drip drip drip... if it was fixed one you shouldn't of had to turn it so tight when you turned it off and two even after you turned it off super tight it shouldn't of still of been dripping afterwards.. I already know it's afrost proof spigot and will drain remaining water out of line but that sir was way too much water after it was shut off.. 🙃
😂 thanks for watching.
That is a shitty design
Yeah was not my favorite to work on. Some manufacturers make them better than others for sure!
You have no idea what you’re doing
Please tell me what I could do better. I’m totally open to constructive criticism. I know my videos aren’t great. I can use all the help I could get.
The video shows that he does. Watch it again if you’re having trouble following the directions. Us viewers are the ones who don’t know what we’re doing-that’s how we end up watching his videos.