Replacing drive belt Yamaha Bruin 350
Вставка
- Опубліковано 5 вер 2024
- In this video showing how to replace the drive belt on a Bruin 350 2 by 4 this would work for a four-wheel drive model 2 and also other Yamaha Grizzlies other ATVs thanks for watching
I appreciate the video.
Don’t ever beat the secondary. Take one of the 10mm screws you took out and there’s two holes in the secondary in the middle. Thread it into one of the holes and it will spread out the secondary.
It seems very easy
Can a pull start be installed on that bad boy?
Nice job!
My guess is you stripped out that top left cover bolt by trying to thread it in by hand at an angle. Lol. Plus judging by the sound of the impact and how quick it immediately began ratcheting was a sure sign.
Awesome thanks 👍
I bought an Bruin 350 and the air intake for the belt is off and I have no idea how to put it back on could you help?
I had the same problem you have to have 2 people and have one person underneath pushing at the 2 90° angles on the air intake and then get someone else to try and wiggle it on and get the screw on and start tightening the clap. If that helps was a little late
Do i have to put the ATV in TDC for this?
Awesome video! 👍👍
Sorry for my stupidity but if the drive belt is bad it doesn’t go for it’s top speed? I have a Yamaha Bruin 350 4x4 and it’s top speed is 30mph can someone please help?? It should go for 50 mph but it doesn’t
What size is the bolt
Dude please stop if you want to make a video don't make it wrong everything you did on here is something I would never do strip the boat beating on it with a hammer come on now that's why not everybody's a technician I know you're trying but don't spread Badness