I am very PUMPED FOR TOMORROW! Any guesses? The bruin is slightly showing it's age. Don't tell it I told you that LOL. Follow me on twitter for future Q&A's @yt3dmachines
Dalton... Way to be a stepping stone, not a stumbling block! As the Dad of an 18 year old son that just graduated this past Saturday I'm thankful for the story you told about earning & paying your way even at a young age. Bravo to you & your parents for setting a good example. I don't have a mechanical bone in my body & my son is the exact opposite... total gear head, but since sub'ing to your channel & watching together we have a lot more to talk about & do together (working on his yz250 & his truck) THANK YOU! Keep it up brother & God bless you.
I gotta redo the reared on my rancher. swing arm bearings went out and cause my pinion seal to go out. also may be a good idea to put a bit of silicone around the o-rings, and if that lip seal was dry and brittle try some grease on it. I'm a millwright/machinist by trade and that's something an older guy told me to do to lip seals that don't get oil on them constantly to keep them from drying out and getting brittle.
You think that thing is old, we are running an 01 Honda recon that started its life hauling fire wood for companies, now we have it for farm use and atv park riding!
man that just shows you how you would raise a kid. make them work for there stuff and they will grow up to be a hard worker like you. you deserve every toy and can't you own.
Thank you 3-D machines you brighten my day when i see your videos thank you for what you do, and no matter what ill always support you and your videos!!!!! 👍👍🇺🇸🇺🇸🇺🇸
Hey Dalton just a tip I see you using your feet to break loose tough bolts. Puts a pipe on the end of the wrench or rachet for extra leverage and you can take it off easily. Works great!
Hey Dalton! I stopped in during the livestream and I remember when you said that you were doing a time lapse in the background. Hope to see more livestreams! Hello from the UK.
Kind of in the same boat. Replaced the rings on my 1990 yz250 (old horsepower is better horsepower right!) as I'm breaking it in a crank bearing went out. But I'm just gonna do it right and get a new rod and bore it out for the second time put in another piston and rings. Thankfully it's sleeved so I can bore it out all day! Also Great video. Keep up the good work. :)
3d machine I been to both your live streams and watch the both to the end I lover how you never give up and you keep moving forward love the vids keep it up ✌️
Hi 3D , I like watching repairing videos like this , but have absolutely no idea how to do it or what anything does , what is a good way to learn about this kind of stuf ? ( besides your awesome videos )
I'm the same way ever since I started landscaping and buying and selling jeeps I've never asked for another dollar and hate borrowing money even if it's for lunch. It's the way the world should be
hi 3d machines i know you probably wont see this but if you use Vaseline on the seals they will hold water better and will last longer because they are lubricated. keep up the good work 👍
Cleaning is the necessary evil all mechanics must face be they pro's or do it your self'ers. Better to do it right and less often than do it half arsed and repeat and repeat and repeat. Another great vid!
We have a 300cc artic cat 4x4 farm quad that I rip around on all the time because I don't have the money to buy my quad. It is still fun to ride on. I think it is 1999. I there is several pictures of me on it when i was as young as 2. I am 16 now.Keep braping on I also what he'd your live stream
you probably have an old lawn mower frame that you can set the back end down on to be able to wheel that quad around. BTW the video quality is very good.
Elbow grease.? I saw you use a karate kick to loosen the bolts... That's unique, I like it. I usually just use the double wrench method... Put close end on bolt then next size wrench close end on the open end of the other... and push.
I am very PUMPED FOR TOMORROW! Any guesses? The bruin is slightly showing it's age. Don't tell it I told you that LOL.
Follow me on twitter for future Q&A's
@yt3dmachines
3DMachines ok
3DMachines 😂😂 great video! Can u get instagram please!? Stay froggy fresh Dalton!
3DMachines 4:00 we know u mean business when u pull the gloves on😂😂😂😂😂😂😂😂😂😂😂😂
when are you going to do a video with the kx or the crf
3DMachines whatever tomorrow's video has in store I'm waiting for it keep up the videos Man
Dalton... Way to be a stepping stone, not a stumbling block! As the Dad of an 18 year old son that just graduated this past Saturday I'm thankful for the story you told about earning & paying your way even at a young age. Bravo to you & your parents for setting a good example. I don't have a mechanical bone in my body & my son is the exact opposite... total gear head, but since sub'ing to your channel & watching together we have a lot more to talk about & do together (working on his yz250 & his truck) THANK YOU! Keep it up brother & God bless you.
I was at the live stream! It was GREAT!!! Keep up the good work Dalton!
I gotta redo the reared on my rancher. swing arm bearings went out and cause my pinion seal to go out. also may be a good idea to put a bit of silicone around the o-rings, and if that lip seal was dry and brittle try some grease on it. I'm a millwright/machinist by trade and that's something an older guy told me to do to lip seals that don't get oil on them constantly to keep them from drying out and getting brittle.
You think that thing is old, we are running an 01 Honda recon that started its life hauling fire wood for companies, now we have it for farm use and atv park riding!
You truly seem like the most nice and happy go-lucky guy I've ever seen! Love the videos man!
Watched the live stream for a bit, had a late meeting. I enjoy you crazy adventures!
After watching for years it's crazy to see how much you've changed. I'm not saying that's a good thing.
Little Aleks Was that meant to be a joke? Haha. Either way, I laughed.
man that just shows you how you would raise a kid. make them work for there stuff and they will grow up to be a hard worker like you. you deserve every toy and can't you own.
Thank you 3-D machines you brighten my day when i see your videos thank you for what you do, and no matter what ill always support you and your videos!!!!! 👍👍🇺🇸🇺🇸🇺🇸
what's better in your opinion, shaft driven, belt driven, or chain driven four wheelers?
I feel u 3D. Whenever my dad takes me riding, I get up, gas it an go! When we get back. I hate power washing
When did you put that light bar on it looks good
Doing awesome!!!!! Caught the live vid too! Was Braapptastic!
I donated 15 dollars to you yesterday during the live stream. Keep the good Vids coming and I live in Buffalo, Ny!
How often did you clean and repack the grease in wheel bearing?
Am I the only one who finds loosening bolts with a ratchet very satisfying?
Hey Dalton just a tip I see you using your feet to break loose tough bolts. Puts a pipe on the end of the wrench or rachet for extra leverage and you can take it off easily. Works great!
3DMachines keep up the awesome video and stay froggy fresh
Hey Dalton! I stopped in during the livestream and I remember when you said that you were doing a time lapse in the background. Hope to see more livestreams! Hello from the UK.
How did u get started on working on bikes, and small motors, and even working on trucks and stuff ?
Kind of in the same boat. Replaced the rings on my 1990 yz250 (old horsepower is better horsepower right!) as I'm breaking it in a crank bearing went out. But I'm just gonna do it right and get a new rod and bore it out for the second time put in another piston and rings. Thankfully it's sleeved so I can bore it out all day! Also Great video. Keep up the good work. :)
Stream was awesome. Can't wait to see more. Also I'm mainly a silent viewer but been watching for quite some time. Keep up the awesome work!
3d machine I been to both your live streams and watch the both to the end I lover how you never give up and you keep moving forward love the vids keep it up ✌️
You just motivated me to save money for a dirt bike.
I mean, I already have a 4 wheeler but I've always wanted a dirt bike.
8 yr old kid hears wheel BEARING, now he thinks there is a fidget spinner in the rear assembly😂
3DMachines could you make a video on how to do valve adjustments?
When did the dmax get a light bar on top
What kind of oil do you use for the diff
I like my machines clean. It makes people jealous about what great condition they're in LOL
Cleaning stuff up is just part of the job. That is why mechanics perform but doctors just practice.
I was here for the livestream! It was great!! You should do more.
Hi 3D , I like watching repairing videos like this , but have absolutely no idea how to do it or what anything does , what is a good way to learn about this kind of stuf ? ( besides your awesome videos )
I was watching the live stream
same
Coby Ison same
Coby Ison same
same
sahmey
I’d make you cry seeing the condition my bruin is in. Still runs like a top, just weebls and wabbles
Are you going to put A/T tires on the dirtymax
Dalton, I respect you very much on the no handouts thing 👍🏼
Love the livestream!!! Keep that throttle twisted BBRRRAAAPPP. Do more livestream s , maybe even just a Q&A
i am 14 years old from ohio and i work for a small landscaping company and the other day i saw a 5 wheel gator just like yours at our job
I watched the live so this was cool to see! Good job brother!!
I stopped by on the livestream! Keep it froggy fresh!
I loved the live stream and the difference between editing and live :)
What size is the bruin
I was on the live stream keep up the awesome work dalton
Great work Dalton! You're #1!
Excited to see the track your making!!!! I don't have to guess.....I already know....
What do you do for work
Hey dalton I love your videos. I just recelntly fixed a polaris 400cc scrambler. Keep up the good work man.
When you rolled it out I thought that you were cleaning it so thanks and the stream was great
When did he get a light bar on his truck
I'm the same way ever since I started landscaping and buying and selling jeeps I've never asked for another dollar and hate borrowing money even if it's for lunch. It's the way the world should be
hi 3d machines i know you probably wont see this but if you use Vaseline on the seals they will hold water better and will last longer because they are lubricated. keep up the good work 👍
hey I was in that live stream. I love your vids please keep them comin
whats going on with the kx
What size is the bruin 450???
Cleaning is the necessary evil all mechanics must face be they pro's or do it your self'ers. Better to do it right and less often than do it half arsed and repeat and repeat and repeat. Another great vid!
where can i buy elbow grease at?
Hey mate spray 5 minute oven cleaner on the alloy parts they will come up like new with minimal effort 👍🏻
Nice video!!!! What's the song name??? Thank's!!!
No video on the Dirtymax lightbar???????
10:12 what song???????????????
What's that song called at the end of the video?
We have a 300cc artic cat 4x4 farm quad that I rip around on all the time because I don't have the money to buy my quad. It is still fun to ride on. I think it is 1999. I there is several pictures of me on it when i was as young as 2. I am 16 now.Keep braping on I also what he'd your live stream
i always have the bell on and look forward to watch your videos, keep it going Dalton
My 2016 Polaris 570 sportsman has very poor steering with the same tires you have on your quad. Is your steering really stiff?
Hey dalton I have a question, are you in the Whitehall New York or lake George area because your property and town looks very familiar
damn the gunk on that brake assembly was THICC
Saw the live stream. It was Braaaaptastic.
what happend to the honda 450?
I stopped in on the live video, love your vids, u inspire me to do great things
Kinda random but i think you'd or someone will know. But anyway where can you buy transmission oil for a lawnmower?
Bakerboy2323 any automotive store. Napa, advanced auto parts, o Reilly, etc
What would you recommend for brand wise?
Bakerboy2323 Lucas or Valvoline are pretty common
Jaxon Slocum thank you
Bakerboy2323 no problem 👍🏻
Never seen a drum brake so damn filthy... is that from the mud and etc or the fluid? damn lol usually always seen it filled with brake pad dust lol
you probably have an old lawn mower frame that you can set the back end down on to be able to wheel that quad around. BTW the video quality is very good.
Loved this video!! Keep up videos like this!
What was the first song?
so happy you came on missed you all day 3d sub out!!!
cleaning "toys", tools, or just about anything allows you to develope respect for the equipment, patience, and discipline.
I donated when you were live.. Hope to see some more live streams.
Hey man, I love the videos. Keep it up 👍🏻
So what's up with that led bar I look back on your other video and this is the only one with the dmax and a led bar
what happened to the crf450
@3DMachines I need help with my quad aka 350 warrior I can't figure out what is wrong with it
Will not start
Hunter Goodpaster what's it doing.
Love the Vids!! Keep up the good work!!
loves the instagram livestream, it was so cun. keep up the good work.
Get yourself a better 1/2 impact like an ingresol rand it will make a world of difference
you should make a snorkel for tour four wheeler.
* your *
Dose anyone know what is wrong with my Atv. The gas in running into the air box thanks
did you sell the Honda
Is Dj Quads the second song too?
Elbow grease.?
I saw you use
a karate kick
to loosen the bolts...
That's unique, I like it.
I usually just use the double wrench method...
Put close end on bolt
then next size wrench close end
on the open end of the other... and push.
3Dmachenes i live in the same area as you and im wondering if you will do a meet up in the Buffalo area or just meet with me.
I have been watching since you replaced the rear swing arm on that 4-wealer
When u gunna tell us about the light bar
Cmon guys road to 1 mil for 3D machines
i love your videos man and i subed thanks for making the videos
Can never have enough paint ... I agree.
dude your videos are amazing
Thank you! It means a lot
I watched the live! Keep up the good vids!
Wonder if they're will ever be a day when 3D will never have a machine to fix
Love the vlogs!! Keep it up!!!