Frizzlife PD600 Reverse Osmosis installation

Installation guid of Frizzlife PD600

[@azrak555]

The sound is masked by loud music turn it down, so we can hear how things are taken care of. Thank you.

[@michaelstanley5215]

Just installed one of these units and the water is great! They are a bit too loud though while in operation and the quality of the water connections could be better. I would be happier with better connections even if it made for a bit harder installation (which was easy, it just took time). The included connections are a bit finicky and are prone to leakage.

[@pb9548]

Man that audio quality is so bad! Is there a way to install this without drilling a hole in the sink for the second faucet? I'm renting a condo and would have to cut through the marble counter to add this.

[@texasrob2782]

i don't know what country this video was made, but that plumbing in illegal anywhere in the USA.
Plumbing code requires an airgap for a discharge to drain.
Also, that is NOT the proper location for a drain saddle clamp.

[@wichotroll7315]

Hello, I’m interested in this RO system, so how the drain should be installed? I’m not a plumber just a DIYer and live in the USA. Thanks

[@ajhefel]

@@wichotroll7315 not a plumber, but I did mine higher, on the straight section, drilling into the P trap just seems like a bad idea

[@frizzlifewater2348]

Hi, you can refer to the "Frizzlife PD400 installation" video on UA-cam for the good location to install the drain saddle. DIY is quite easy actually

[@justinthyme9066]

That's great if you have a metal sink. Is there a way to fit the tap (faucet) to a ceramic farm house style sink?

[@kevinkcheng]

My PD600 unit didn’t come with the leak stop.
1) Was it supposed to come with a leak stop?
2) Also, is the leak stop inlet/outlet openings supposed to be 3/8” since it sounds like it goes on the 3/8” tubing connecting the feed water valve and the PD600 unit?

[@bobblu1688]

I just got mine delivered. the two filters are already installed and the blue tabs in the back where the tubes go into are missing. I feel like you'd was used product or something. However, all the accessories included looks new. I think I should return it?

[@paulphillips8855]

Hi I'm in the UK and fitting one of these but have hit a problem with the T valve as the connections are a different size and length (too short). Every thing else is fitted except for this bit

[@roofernick1028]

I only got two hoses and there's three parts in the back for hoses. Do I cut one in half?

[@chaser4251]

How often do you swap out filters? It doesn’t say on my machine

[@purifiedhealthywater3958]

0:25 the second ... is NOT a filter, but a reverse osmosis MEMBRANE.

[@user-ez7ml6il1p]

How do you make the hole if you have a granite counter, and the faucet is the only thing sticking out of the granite counter, with the sink being flush with the granite counter?

[@RT-qz5ci]

Just get a diamond drill bit set. Watch a video also. It’s easy though, be patient and let the drill bit work.

[@dwt6021]

How dummy proof is this R.O. system installation? It looks like someone could get the waste and filtered water crossed during installation, since lines are same color and size.

[@arianesautreuil7929]

Can we install it horizontally?

[@AL-KHALDI-SA]

Red light blinking I Replaced the large replaced the CP filter and red light continues to blink

[@WhiteKitta]

I would not want to alkalize my water actually,...can this be used without the last mineralizer filter part?

[@VintClarkTCA-]

I was just curious as to Why not?

[@frizzlifewater2348]

You can simply twist off the TAM3 filter to get only reverse osmosis water without remineralization, and you can twist back to get good remineralized again.

[@hugotrasmont]

Thanks for your video, you would do me a great favor if you share the characteristics of the power supply, I bought a piece of equipment just like yours, but it does not have that implement

[@nancarter5474]

can you add a uv light to this system?

[@davidrod8954]

Never drill the discharge line into your peetrap

[@dan-lr4zm]

How do I determine tube lengths?

[@abibodlogistics]

Is it compulsory to use these two filters together that is the PD600 filter and the TAM3 filter or they can be used independently .

[@frizzlifewater2348]

they can be definitely used seperately, but we would suggest to connect the TAM3 after the reverse osmosis to get a good alkaline and remineralization result. The TAM3 filter is designed with auto shut off features , if you simply twist the TAM3 off, you will get RO water only through PD600.

[@hugotrasmont]

@@frizzlifewater2348 me gustaría saber las características de la fuente de alimentación para el equipo de G500-A

[@nancarter5474]

I didn't understand how to install the leak stop.

[@GeneralRock114]

The only bad reviews I’ve seen are leaking issues. So, where is the system prone to leaks?

[@frizzlifewater2348]

Hi, the PD600 with a built in integrated water board inside, no tubing connections , normally it won't leak at all. there's one or two cases has a valve leak because of wrong installation, but Frizzlife always has a great customer service and make sure to solve any problems that may occur. Will have a fast response if you email to [e-mail]

[@dan-lr4zm]

The faucet connection leaked at first, and the TAM filter leaks internally

[@dan-lr4zm]

TAM filter leaks like a sieve from the upper housing!

[@AL-KHALDI-SA]

Red light blinking I Replaced the large replaced the CP filter and red light continues to blink

[@AL-KHALDI-SA]

Red light blinking I Replaced the large replaced the CP filter and red light continues to blink

[@justskins]

Red light blinking I Replaced the large replaced the CP filter and red light continues to blink