CZ P01 Decocker/SP01 Tactical Complete Disassembly and Reassembly
Вставка
- Опубліковано 27 кві 2023
- This is the last time that you will need to look up content or information on a CZ Traditional lock work decocker model. In this video, we break down all of the steps from start to finish on the frame and slide. Most people struggle when they try to install their own parts or they want to break down their P01 all the way, so why not make a video. We build multiple decocker models in the shop every day, so if you have any questions, leave us a comment or message us through email or DM
Socials:
IG: CGW_Cajunzied
FB: Cajun Gun Works
Email: Cajungunworks@gmail.com
Since I just bought one of these I decided to watch this video from start to finish. What I learned was I won't be taking this pistol apart aside from general cleaning. Nice Job.
.
I appreciate the effort of making the video. If there is any way to get a closer clearer picture of the actions that would be great. I would love to see a beginning to end of cajunizing a P01 plus polishing/installing new parts.
I have a pack of those Zeiss towelettes for my glasses, but they also work great on cleaning my laptop camera for when I have to use it for Zoom calls or whatever. They also work great on portable devices. I'm sure Cajun has something like that around the shop, and maybe they will see your comment and mine and try that to resolve the issue for future videos. :-)
Just finished the P-01 Pro couldn't have done it without the video, being dyslectic and all
Had a few bumps but the last sear cage went smooth and didn't lose the L spring.
Thanks CWG
wow, you weren't kidding about the factory retaining pin. Even with the tool you guys recommend that took a lot of hammering to get that out. CZs are great guns, but damn some of the internal features are hilariously over complicated. Appreciate you posting this as it helped with my entire parts install. The tips and tricks were nice, although I was losing it at some parts where you made steps look super easy, but they were far from it haha.
Thank you for this! This video was SO helpful! I did run into issue where sear spring needs to have the small arm riding on the sear to push down. It wasn't clear in this video and I had to take apart again. Also, the trigger pin can be used as a slave pin. I also used the hammer main spring retaining pin as another slave pin to for the make it easier to drop in springs in the sear cage.
The difference with this kit blows my mind. Just night and day, well worth the money. Thank you Cajun Gunworks!
Thanks a bunch .. any chance you could improve the resolution on future videos and start with high contrast clean mat that would really help with details . Close up angles would also help .. Luv them Cz's playing back at .75% speed helps with content , maybe on post edit you all should slow it 10-12% , will improve viewer experience and not distort audio........ btw , I too use a roll of tape as a bench block ..lol 👍👍
My P01 is down there with you all now.....I absolutely cannot wait to get it back and try it with the work you all are doing to it.
What does it cost?
CZ's only need lube in the right areas. This was for demo purposes and for the sake of clarity we did not lube this as we assembled. Owners manual typically shows where to lube.
Fantastic work my friend! This video was excellently filmed and explained!!!! Thank you kindly for sharing this information with us!!!
Thank you for the indepth video. I Cajunized a P-01 Steel Frame and now I want to cajunized my P-01 Decocker. This video will help immensely.
Thanks for the vid. I noticed on reassembly, none of the parts were lubricated. Interested to know what parts we should be lubricating? Thanks
Great job team, keep up the excellent work. 💪🏽
Great video- so helpful, well shot, and informative.
I just got a used SP01 Tactical with the CGW upgrades and it's *slick*
Thank you for the video! It was much better then the one I seen on y’all’s website. Not sure if this one is on there or not, but glad I found it!
Outstanding i buy yesterday an 75 P-01 i
disassembly any peace to clean up well the only difficulty i have was the trigger spring but i built an slave pin no problem but this CZ guns are an master peace great GUNS
THANKS great video my freind
Thanks a lot for the video and it help a lot. Very good video.
Thank you for sharing all your knowledge and experience .
It is absolutely our pleasure!
Good job! Thanks for the explanation, bro.
Thank you for this video. It was a bit difficult to see exactly what you were detailing in a few spots, but overall this was very helpful.
I have a PCR with the pro package installed. I knew it was beyond my skills, so I had a local smith install. Bought him a bottle of his favorite adult beverage as a bonus. I love how much it was improved. That pistol is my EDC and I think I will place in my will that it goes in the box with me - for whatever comes next. 😉
Thank you for the feedback. Hopefully when we get a little better setup for filming we can make a video that is a little easier to follow along with.
Awesome videos, thanks a lot
Thank you for this video! Very informative and I learned a couple of new techniques to put my P01 and other decocker models back together. KEEP ON ROCKING!
Thank you for making and sharing this video. I would just like to add that in the future if you could use a clean white mat for a better contrast. More close-up shots would also be nice especially when working with tiny parts. Still, a great tutorial. Much appreciated.
Please do a video showing your method of reinserting the mag release spring. Thanks
Thanks.
THANK YOU!!!!!
Any word on when the polishing guide is going to come out?
Could you guys please do a proper dessasembly and reinstallation of the slide stop spring and the extractor?
Good stuff only thing bf is yall need a better quality camera to record these small springs stuff
How about a 97BD disassembly and reassembly, please.
Thank you for very informative video. One question about removing the firing pin roll pin retainer, does it matter removing the pin from left to right or right to left and does it matter. Now I know for a fact, I ain’t gonna go no further then the slide and firing pin upper. Forget the lower 😂 If I was to do this I’ld be sending a basket case to y’all.
No it does not matter if you knock it out right to left, or left to right!
Hey I aye dirt last week training with my p01 and jammed the bottom of the grip into the ground and now my mecgar magazines are tight and have to be pried out when before they’d drop freely everytime. My standard magazines still work perfect. It looks like they’re tight against the sear cage now and idk if this is a simple fix or if I bent my frame a tiny bit ): I was planning on getting it cut for an optic soon too and now I’m having some buyers remorse
When, why and how often does this gun need taken down like this? I’m considering the P01 but this puzzle is a potential deal breaker.
I thought a full strip and detail of a 1911 was alot at first this seems a little overkill I really like this gun tho I've held a few in the stores they have an amazing trigger but man that seems like a nightmare to breakdown and put back together
It is.
Unless you are a tinkerer, stay away.
Hey friend I watched the video you have for adding cgw upgrades in omega compact, I didn’t everything correctly checked twice, Decocker now walking out of place, didn’t do that before. How do I fix; what am I missing
I have the Omega version. Is the process the same? Please let me know. Thank you for these great videos!
No, the Omega internals are completely different from the traditional lockwork. Please view our P-09 video which has the omega internals. Even though it's a polymer frame the process is still the same.
I’m stuck, need to call the pros on Monday
I’m having issues , when you put the sear cage back and installed the mainspring back when you pull the trigger it keeps shooting and the hammer keeps firing , it doesn’t do that on mine it decocks and fires in both SA & DA but doesn’t keep firing like yours is doing at 26:26
Would have loved this vid 5 years ago. Haha. What a nightmare!!
I'm never getting into the guts of a decocker CZ. No f'ng way...
@@thatpointinlife haha smart man! I learned my lesson
It was harder than college physics.
What sights are those? I would like to add those to my P-01
forgot about the extractor
Right the pin on mine is rusty and that's the only reason I watched this video
What about the ambi de cocker that the tactical has? I’m trying to figure out how to take mine out
It's the same process except on the right side of the decocker arm you need to remove the lever. It isn't one peice and can be separated. Typically a small punch to help press on the spring to help remove the lever is required.
Why are P01's not really in stores anymore? I rarely see them new now
They come from the Czech Republic in batches. We placed an order for 60 first of 2023 and were we told 3 - 6 month delivery. We are still waiting.
It’s 2023 why it look foggy low res. As someone with shitty eyesight and with something with such small part I’d wish they use a better quality camera.
Is this the same as a model with an ambi decocker?
Yes, the only difference is the right side decocker has to come off before the left side can come out.
GREAT ...VEDIO....cz pistols very under rated...have two shipped to you, or your dad...fyi..still have Davids phone number on my phone..fyi
Thanks for the video, good job
2A - 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸😁☝️