I took my friends recommendations on this pistol and I was actually very pleased with it! One of the few pistols I would consider a nice do it all pistol if I only had one.
I completely agree about the stock rubber grips. With dry calloused hands, they give me better grip than any stipple job. Also, I like that the trigger gets better and better with use.
Great video Brother..I have the CZ-P-01..remove the polymer guide rod, replace with a metal rod from Cajun gun works.. Guaranteed to shoot flatter 👍🏾👍🏾👍🏾
you are right in that they are hard to find, that's still the case. it does seem like they come in in batches, and they a bunch of places have them, then three weeks later they are out again
Great handgun! I 100% agree on the low recoil. You can clean up the trigger with some CGW parts, but the stock one is definitely serviceable. Definitely a solid do-it-all gun.
Fantastic pistol. Try those LOK grips. The closest style is the “fully checked palm swell”. I tried two other patterns but the fully checked is the closest to the rubber grips. Best of luck.
mine is guccied to the max...dpm recoil spring, cajun gun works pro package, trl7a, ported barrel, carbide grips, with 2 tone burnt bronze slide black frame...its a sweeeeeet shooter
@@KonaLife to me yes. to new shooters they wont know what therye feeling. to me its a smooth and predictable recoil impulse which translates to faster follow ups and more consistent pattern. upside is you cant limp wrist anything with this system. if you have plastic fantastic id highly recommend it, cant go wrong just fyi its like $80~150 investment depending on gun and where you get it from.
So the total trigger pull weight is lighter at half cock then with the hammer down? How is that possible when the hammer spring is compressed the same just before the hammer falls? It isnt lighter, just a shorter pull.
I love the chamfer for your trigger finger just. They didn't have to carve that out for us but they did. And it's a super comfy shelf to rest your trigger finger.
As you know this pistol is my overall blanket recommendation for anyone needing a do it all handgun and I think for very good reason, I'm going to have to check my import marks on mine when I get home, I might have one stamped with each mark
The same exact thing about the dust cover turned me off initially too. Seeing more and more of them on here and on Reddit made the look grow on me for sure.
First let me say great video thank you. So I was just curious you had referenced the SKU # I was just wondering what you ment I actually just purchased mine from the same company Family firearms just waiting for them to receive from distributor then Brian said it would be shipped out to me. Ok Thanks again God bless
You can get the older style trigger from Cajun Gun Works that is less curved and easier to reach. They also have a reach reduction kit that reduces the trigger reach by 5mm.
CZ bought Colt. P01 is an excellent edc. I carried it for a long time and now carry the Shadow 2 Compact.
CZ = quality, even their P10 line is great.
I completely agree about the stock rubber grips. With dry calloused hands, they give me better grip than any stipple job. Also, I like that the trigger gets better and better with use.
Mec Gar makes the OEM mages, so you're really just losing the CZ stamp on the factory mags.
Great video Brother..I have the CZ-P-01..remove the polymer guide rod, replace with a metal rod from Cajun gun works..
Guaranteed to shoot flatter 👍🏾👍🏾👍🏾
I ordered a CZ store steel guide rod and it made a noticeable difference I think
@@shazarad4127 Awesome 👍🏾👍🏾👍🏾
I don't notice a difference between the two at all. How does a guide rod make the pistol more flat? lol
@@JNOSNOW simple, more weight in the front end is more weight that the recoil energy has to move, results in less movement - even slightly
@@shazarad4127 that's such a minute amount its ridiculous.
you are right in that they are hard to find,
that's still the case. it does seem like they come in in batches, and they a bunch of places have them, then three weeks later they are out again
Great handgun! I 100% agree on the low recoil. You can clean up the trigger with some CGW parts, but the stock one is definitely serviceable.
Definitely a solid do-it-all gun.
Fantastic pistol. Try those LOK grips. The closest style is the “fully checked palm swell”. I tried two other patterns but the fully checked is the closest to the rubber grips. Best of luck.
mine is guccied to the max...dpm recoil spring, cajun gun works pro package, trl7a, ported barrel, carbide grips, with 2 tone burnt bronze slide black frame...its a sweeeeeet shooter
Does the DPM recoil spring make a big difference?
@@KonaLife to me yes. to new shooters they wont know what therye feeling. to me its a smooth and predictable recoil impulse which translates to faster follow ups and more consistent pattern. upside is you cant limp wrist anything with this system. if you have plastic fantastic id highly recommend it, cant go wrong just fyi its like $80~150 investment depending on gun and where you get it from.
So the total trigger pull weight is lighter at half cock then with the hammer down? How is that possible when the hammer spring is compressed the same just before the hammer falls?
It isnt lighter, just a shorter pull.
I've wanted a CZ-75 for years and you're making a very convincing recommendation there. Time to move it up on my wish-list.
For carry P01 and for Competition SP01, it is the best pistol, then buy the lokgrips and it will be looking great, I have them, love it
This would be my one pistol if I could only have one.
The non Omega Has a Better trigger
Best gun in my collection
Mine was not made in Hartford ct.I am going to agree it’s a good all around firearm. I’m very happy with this one .😊
I love the chamfer for your trigger finger just. They didn't have to carve that out for us but they did. And it's a super comfy shelf to rest your trigger finger.
Vytal has some palm swell grips and thin grips not to mention a lot of colors and look sick
I got me one today and right out the box no oil it and it ran like a champ
Get some Lokgrips and make it nice, Lokgrips is so pupular on CZ,
I would like to see you do a 92x Compact vs CZ P01 video..
I've been thinking about a CZ-P01 for awhile now.
Mine says Made in Czech Republic, I’m on that train
As you know this pistol is my overall blanket recommendation for anyone needing a do it all handgun and I think for very good reason, I'm going to have to check my import marks on mine when I get home, I might have one stamped with each mark
The same exact thing about the dust cover turned me off initially too. Seeing more and more of them on here and on Reddit made the look grow on me for sure.
First let me say great video thank you. So I was just curious you had referenced the SKU # I was just wondering what you ment I actually just purchased mine from the same company Family firearms just waiting for them to receive from distributor then Brian said it would be shipped out to me. Ok Thanks again God bless
The SKU number just tells you the exact model you are ordering, useful to know for small details that might matter to you
How is the trigger reach? I have small hands, would it be difficult for me to reach the trigger in double action?
for the double action pull you'll have a bit of trouble. that being said, i'd find a range that has one for rent to get an honest opinion on it.
You can get the older style trigger from Cajun Gun Works that is less curved and easier to reach. They also have a reach reduction kit that reduces the trigger reach by 5mm.
@@MrPopeye722 i wish i knew about that, would have saved a customer from having to sell his. thanks for putting that out there :)