Great video, Just want to mention to every one I have found that if you put the hammer in the half cocked position when the slid touches the hammer the take down notches a lined up.
This video is still useful 3 years later. Just picked mine up yesterday and put rounds through it today for the first time and I'm about to clean it! Thanks for the video!
Thank you so much for making this video. I found it helpful and informative without overwhelming me with information I did not need. I also like the low-key matter-of-fact style.
I just bought one of these bad boys yesterday. The factory doesn't seem to oil the slide, so it's a probably good idea to proactively lubricate key components before firing a round. Very impressed with the overall quality, and specifically the internal rail system on the slide. I wonder why more brands aren't using this type of construction; perhaps CZ has the patent? Anyway, thanks for the helpful video, @Skull Crush Inc. +1 Like
How often do you recommend cleaning the P-01? Also, would you recommend cleaning and lubricating before using for the first time? I just bought one recently and taking to the range next week, thx for the awesome detailed video 👍
Yes, clean when new to get the factory grease out of it. Clean after every use, regardless of round count. This will make sure it’s always 100% good to go at anytime.
First time gun owner here! I have Hoppe's bore cleaner and a bottle of Hoppe's lubricating oil. I do not have any CLP. I noticed you used the CLP to clean the inside of the barrel(bore). If I get some CLP, should I use it to clean the whole gun like you did and then use the bore cleaner for the bore? Silly question, I know. I appreciate it!
You can clean everything with CLP. Bore cleaner is for the bore. You can use bore cleaner if that’s what you have. Just use the lubricant to go back and lube the dry metal surfaces and friction areas. Just try to not leak any fluids into that hole on the breach face (where the firing pin comes out to strike the primer).
Okay gotcha. Thank you fo rthe information! I'm looking to get some CLP. I like how its a "combination". This video has helped me a ton! Thank you sir. @@SkullCrushInc
I have reman rounds that are failing to chamber.. the slide gets stuck and the road will not sit. I did a barrel check with the gun disassembled and rounds seem to be fine in length. Any ideas on what the issue is? Would cleaning resolve?
I got the pin out, but the slide is still catching and won't slide off the front. Is there a catch you're pressing with your thumb to get the slide off? Thanks.
My Slide Stop absolutely refuses to budge, it's just COMPLETELY stuck. It takes the force of my entire hand to drop the slide, is there something going on with my P01 Omega?
I hope you can give an opinion on this, or anyone else that can chime in. I bought a CZ75 Compact and a CZ75 P-01. Both are great guns. My issue is with the plastic guide rod. It seems to be cheapish. It is getting marred up with some deep scrapes and such. I have ordered two SS guide rods for these guns from NDZ. Was / is this a good move ???
That’s just the way CZ does it. Not sure if there is a good reason for it or maybe they just wanted to save a little money on the finish. Either way, it’s still a very good pistol.
📺 SUBSCRIBE: youtube.com/@SkullCrushInc?sub_confirmation=1
What you’ll need:
Gun Cleaning Kit: amzn.to/4h2T3dl
CLP: amzn.to/488i96s
Bore Snake: amzn.to/3Nov8aL
Gun Cleaning Rags: amzn.to/3Nqdwep
Angled Gun Cleaning Swabs: amzn.to/3UbAnOF
Gun Cleaning Patches: amzn.to/3NrWEUy
Powder Free Nitrile Gloves: amzn.to/3NrFZRa
Gun Cleaning Mat: amzn.to/3U8c0kS
Skull Crush Holster: skullcrush.com/store-1-5xxzp/holsters-h79cy/p/iwb-holster
🤠 Patreon: www.patreon.com/skullcrush
✨ G10 grips for the P01: amzn.to/45BVvBI
Great video, Just want to mention to every one I have found that if you put the hammer in the half cocked position when the slid touches the hammer the take down notches a lined up.
This video is still useful 3 years later. Just picked mine up yesterday and put rounds through it today for the first time and I'm about to clean it! Thanks for the video!
You’re welcome!
Ive had over 30 different guns and shoot a lot and still watched the video start to finish. Great job.
Thank you so much for making this video. I found it helpful and informative without overwhelming me with information I did not need. I also like the low-key matter-of-fact style.
Great Vid , another great tip is old school WW2 cleaning tips. If it slides grease it, if it rotates oil it 👍
Got my fist cz and this video helped a lot thank you
@@yemxgrunt7327 You’re welcome and thanks for watching.
Excellent video, helpful, straightforward, well spoken and clear. Perfect!!
Thank for the help. I just picked up my CZ this morning. I love it
Congratulations!
very helpful as a new cz po1 owner
The voice helped me sleep. Great vocal
Awesome video, felt comfortable field stripping for the first time. Straightforward video.
Thank you!
Great video. I love my CZ 75 P-01!!
Ty. A Cz is the first pistol I’ve owned and I had no idea how to care for it. Ty for your video appreciate it a lot
Very informative and easy to understand. Thanks, appreciate it!
Great cleaning instructions thanks
Thank you for the compliment sir.
Very simple and straightforward
Excellent video!! Very well done and informative. I learned better ways to clean my CZ and mistakes I had been making to it. Thanks very much!
Thanks for the help with my P-01!!!
I just bought one of these bad boys yesterday. The factory doesn't seem to oil the slide, so it's a probably good idea to proactively lubricate key components before firing a round. Very impressed with the overall quality, and specifically the internal rail system on the slide. I wonder why more brands aren't using this type of construction; perhaps CZ has the patent? Anyway, thanks for the helpful video, @Skull Crush Inc. +1 Like
This is extremely similar to the Browning Hi-Power. I have a P01 Omega and love it.
Which website did you buy from?
Great video buddy , you did good job. I love my czpo1
Thanks bro!
Thanks so much. outstanding video
@@tdt5927 you’re welcome and thank you for watching!
Thanks that was a very Thorough cleaning job great video
Thank you so much for this video… this was just what I needed!!! Excellent instructions.
Thanks for the cleaning video
Thank you! Very clear!
Great Video.Would you mind sharing where you purchased your Grips? Thk you.
Great video. Concise and to the point. Thank you very much.
If you decock it and move the slide back till it touches the hammer, the two lines lignup perfectly.
Well done
How often do you recommend cleaning the P-01? Also, would you recommend cleaning and lubricating before using for the first time? I just bought one recently and taking to the range next week, thx for the awesome detailed video 👍
Yes, clean when new to get the factory grease out of it. Clean after every use, regardless of round count. This will make sure it’s always 100% good to go at anytime.
SAMEEE
Very helpful thanks so much!
Thank Man much appreciated
First time gun owner here! I have Hoppe's bore cleaner and a bottle of Hoppe's lubricating oil. I do not have any CLP. I noticed you used the CLP to clean the inside of the barrel(bore). If I get some CLP, should I use it to clean the whole gun like you did and then use the bore cleaner for the bore? Silly question, I know. I appreciate it!
You can clean everything with CLP. Bore cleaner is for the bore. You can use bore cleaner if that’s what you have. Just use the lubricant to go back and lube the dry metal surfaces and friction areas. Just try to not leak any fluids into that hole on the breach face (where the firing pin comes out to strike the primer).
Okay gotcha. Thank you fo rthe information! I'm looking to get some CLP. I like how its a "combination". This video has helped me a ton! Thank you sir. @@SkullCrushInc
Do you guys make holsters for the IWI Masada?
Not yet sir. Hopefully very soon. The IWI Masada is fantastic.
Nice gun
We only need to wipe off clp with a cloth the parts exposed to the outside right? The rest should have a thin coat of clp for lube?
Yes.
Great video...
Thanks for the posting,
Thank you!
I have reman rounds that are failing to chamber.. the slide gets stuck and the road will not sit. I did a barrel check with the gun disassembled and rounds seem to be fine in length. Any ideas on what the issue is? Would cleaning resolve?
Try cleaning and use a different type of ammo. If it still has issues, sent it back to CZ. They’ll get it fixed.
How often should you clean? Some have told me after each use, others don't. Great video.
Clean after every use to keep it in perfect operating condition.
those are sone great grips, where did you get them? Thanks
The link is in the show notes.
Very nice looking grips, care to share where you picked them up ?
Yes, here’s the Amazon link: amzn.to/3FEHOrn
If you set the gun at half-cock, the slide automatically stops at the matching lines, slide removal position.
I got the pin out, but the slide is still catching and won't slide off the front. Is there a catch you're pressing with your thumb to get the slide off?
Thanks.
Make sure you pull the trigger to get the hammer forward first.
Great video! What grips are those?
Here’s the link to the grips Joshua: amzn.to/3bc6vL5
Great video Thanks! What kind of magazine are you using? The stock ones are hella stiff and hard to load.
I use stock mags. If they’re hard to load, use a mag loader.
My double action is smooth but my single action is gritty, any advice?
Clean all moving parts thoroughly and see how it goes. It shouldn’t be gritty.
@@SkullCrushInc thanks I'll give it a shot
My Slide Stop absolutely refuses to budge, it's just COMPLETELY stuck. It takes the force of my entire hand to drop the slide, is there something going on with my P01 Omega?
Hard to diagnose without seeing it. Probably need to take it by your local gun store and have them take a look.
Do you need to do this when you first get your gun?
I do, but it will be fine as long as you clean after every use.
I hope you can give an opinion on this, or anyone else that can chime in. I bought a CZ75 Compact and a CZ75 P-01. Both are great guns. My issue is with the plastic guide rod. It seems to be cheapish. It is getting marred up with some deep scrapes and such. I have ordered two SS guide rods for these guns from NDZ. Was / is this a good move ???
I never had a problem with my plastic guide rod but there’s nothing wrong with upgrading to metal.
@@SkullCrushInc Thank you for your reply. My plastic guide rods are really getting buggered up. I will try the ss rods.
Why is the frame inside all white mine is like that also
That’s just the way CZ does it. Not sure if there is a good reason for it or maybe they just wanted to save a little money on the finish. Either way, it’s still a very good pistol.
Thank you for the video, is the recoil spring guide rod polymer?
The stock one is, you can also buy an all-metal one from CGW if thats an issue for you
I never had an issue with the plastic rod. I went M-carbo stainless though. Just cuz.
What are the grips on your gun?
G10 grips: amzn.to/45BVvBI
TY, Is that grip rubber? if so where did u get it?
It’s G10 grips. Here’s the link: amzn.to/3IxCrIN
didn't he say the brush was a 357? Isn't this a 9mm?
.357, .380, 38, 9mm are same diameter.
Which sights are those?
Standard stock sights.
@@SkullCrushInc Really? Every other P01 I've seen has more of a ramp shaped rear sight that extends all the way to the rear of the slide.
I wish CZ would move the take down marks to the right side.
watching this video is similar to staring into the sun
🔥
👍👍👍